Service manual

Chapter 15
15-7
#5 TYPE
Use it to select a specific country/region from the list so that the settings under #1 through #4 will comply with the
communications standards of the selected country/region.
When changing the TYPE setting, be sure not to select a country/region which is not the country/region of
installation.
F-15-6
MEMO:
To select the SW number in #1 SSSW of #7 PRINTER, use Paper Select key and Enlarge/Reduce key. To select a
bit, use the Left or Right Arrow key.
#6 SCANNER (scanner function setting);
The setting of this item can affect the read image quality. A change may be made to '7. CCD' when adjusting the
image position; otherwise, do not use this item.
#2 NUMERIC Param
#4 PRINTER RESET
YES= (<)
NO= (>)
#3 PRINT COUNT
#7 PRINTER
(printer function setting)
SW01 through 05: not
used
reduction setting
SW01 00000000
SW05 10000000
SW06 00000100
SW07 00000000
SW20 00000000
SW 07 through 20:
#5 MLT CLEANING
#1 SSSW
#6 SCANNER
(scanner function setting)
1. Bit SW
2. SLICE
3. GAMMA
4. Numeric
5. LUT 1 fno
6. LUT 2 adj
7. CCD
8. MODEL
not used