Service manual

Chapter 15
15-20
#1 SSSW-S26: transmission function setting
T-15-16
[Bit 2]
Use it to specify whether or not to indicate a confirm message to prevent the user from making a broadcast by mistake
when entering an address for a broadcast transmission.
[Bit 3]
Use it to specify whether or not to use broadcast transmission to prevent the user from making a broadcast by mistake
when entering an address for a broadcast transmission.
[Bit 6]
Use it to specify whether or not to suspend a communication to all parties when a broadcast transmission is
suspended.
[Bit 7]
Use it to specify whether or not to generate an error TX report when a transmission is suspended by pressing the Stop
key.
#1 SSSW-SW28: V.8/V.34 protocol settings
T-15-17
Bit Function 1 0 Factory
setting
0 not used - -
1 not used - -
2 broadcast transmission confirmation ask do not ask 0
3 broadcast transmission prohibition ask do not ask 0
4 not used - -
5 not used - -
6 other party at time of broadcast
transmission suspension
single party all parties 0
7 error TX report at time of transmission
suspension
do not generate generate 0
Bit Function 1 0 Factory
setting
0 Caller V.8 protocol No Yes 0