Service manual

Chapter 15
15-72
F-15-52
*1: service error code.
*2: START TIME; date and time (in 24-hr notation).
*3: OTHER PARTY; telephone number sent from other party.
*4: MAKER CODE; manufacture code.
*5: MACHINE CODE; model code.
*6: bits 1 through 48 of received DIS, DCS, or DTC.
*7: bits 1 through 48 of received DIS, DCS, or DTC.
*8: RX: received procedure signal.
TX: transmitted procedure signal.
RX Report (for service)
A service error code list and an error dump list may be attached to the RX report in response to an error reception.
To attach, use SSSW-SW01 in service mode.
02/08/2001 19:29 FAX 001
START TIME 02/08 19:28
OTHER PARTY
MAKER CODE 10001000
MACHINE CODE 10011100 00000000
Rx : (bit 1) 00000000 01110011 10011101 00100010 00000000 00000000 00000000 (bit56)
Tx : (bit 1) 00000000 01100000 00011111 00100010 00000000 00000000 00000000 (bit56)
Rx : NSS CSI DIS CFR PPR
Tx : NSS DCS PIX PPS-EOP PIX PPS-EOP PPS-EOP PPS-EOP DCN
*1
*2
*3
*4
*5
*6
*7
*8
TX FUNCTION WAS NOT COMPLETED
TX/RX NO
DESTINATION TEL #
DESTINATION ID
ST. TIME
RESULT
TIME USE
PGS.
0004
12
02/08 19:28
01`31
0
NG
##0765
12
ERROR TX REPORT
**************************
*** ***
**************************