Service manual

Chapter 4
4-3
F-4-6
4) Using a flat-blade screwdriver or the like, remove
the 2 covers [1]; then, using long nose pliers or the
like, remove the 2 pins [2].
F-4-7
5) Return the reader unit to its initial position.
6) Open the ADF.
7) Using a flat-blade screwdriver, remove the cover
[1].
8) Detach the ADF [2] from the host machine.
Take care so that no part will become trapped by
harness of the ADF.
F-4-8
4.2.1.5 Removing the Control
Panel 0006-9611
1) Slide the reader unit, and open the cartridge cover.
2) Remove the screw [1], and slide the control panel
[2] to the left.
F-4-9
3) Close the cartridge cover.
4) Disconnect the connector [2], and detach the
control panel [1].
To prevent damage to the flexible cable, be sure to lift
the control panel slightly as shown when
disconnecting the connector [2].
[1]
[3]
[2]
[1]
[2]
[2]
[1]
[1]
[2]