Service manual

Chapter 4
4-7
2) Remove the 2 screws [1], and detach the copyboard
glass retainer [2].
3) Remove the copyboard glass [3].
F-4-23
4.2.3.6 Removing the Sensor
PCB 0006-9564
1) Move the contact sensor to the center.
2) Remove the 2 screws [1], and detach the left upper
cover [2].
F-4-24
3) Remove the sensor flag [1] and the spring [2].
4) Disconnect the connector [3].
5) Remove the 2 screws [4], and detach the sensor
PCB [5].
F-4-25
4.2.4 Scanner Motor
4.2.4.1 Removing the
Copyboard Glass 0007-7194
1) Open the ADF.
2) Remove the 2 screws [1], and detach the copyboard
glass retainer [2].
3) Remove the copyboard glass [3].
F-4-26
4.2.4.2 Removing the Reader
Motor Drive Unit 0006-9603
1) Free the contact sensor [1] from the drive belt [2].
[1] [3]
[2]
[2][1]
[5]
[4]
[3]
[2]
[1]
[1] [3]
[2]