Service manual

Chapter 4
4-8
F-4-27
2) Using a flat-blade screwdriver, remove the cover
[1], and remove the screw [2].
F-4-28
3) Slide the reader unit to the left.
4) Remove the 4 screws [1], and detach the 2
grounding plates [2].
5) Disconnect the connector [3].
6) While paying attention to the rib [8], lift the rear
motor drive unit [4] toward the right to detach.
F-4-29
4.2.5 Contact sensor
4.2.5.1 Removing the
Copyboard Glass 0007-7195
1) Open the ADF.
2) Remove the 2 screws [1], and detach the copyboard
glass retainer [2].
3) Remove the copyboard glass [3].
F-4-30
4.2.5.2 Removing the Contact
Sensor 0006-9601
1) Remove the 2 spacers [1].
F-4-31
2) Shift up the contact sensor [1], and disconnect the
connector [2].
3) Remove the contact sensor [1].
[1]
[2]
[1]
[2]
[1]
[1]
[2]
[1]
[3]
[2]
[5]
[4]
[1] [3]
[2]
[1][1]