imageCLASS D880 Fax Guide

The standby display differs depending on which mode is selected. When the machine is plugged in, the Copy

Mode standby display appears. You can switch from the Copy Mode to the Fax Mode by pressing FAX.

The standby display in the Fax Mode is as follows:

■ Fax Mode

• The standby display in the Copy Mode → Basic Guide.

Connecting to the Telephone Line and an External

Device

The machine has two jacks on the left side for connection of the following:

: Telephone line

: External device, such as a telephone or an

answering machine

Making Connections

NOTE

Receive Mode Fax Resolution

Date & Time

Standby Display

If you need to send and

receive faxes and voice calls,

connect the cable from the

telephone or answering

machine to the jack.

Connect the supplied

telephone cable to the

jack, then connect the other

end of the cable to the

telephone jack on your wall.

1-3

Introduction

01 FAX_Chp1.qxd 6/17/04 12:43 PM Page 1-3