imageCLASS D880 Fax Guide

3-6
Creating Groups
• The Function key will light up by pressing Function to be able to operate Clear.
NOTE
Group Dialing
1
Press Additional Functions.
2
Use 4 (–) or e (+) to select 4.ADD.
REGISTRATION.
3
Press Set.
4
Use 4 (–) or e (+) to select 3.GROUP
DIAL.
5
Press Set.
Ex:
6
Select a one-touch speed dialing key or
coded speed dialing code under which you
want to register the group.
• If you wish to register a group under an
already registered one-touch speed dialing
key or coded speed dialing code, or you
want to re-enter a group, you must delete
the previous information first. (→ pp. 3-2,
3-4, 3-5)
• Do not register a group under a one-touch
speed dialing key or coded speed dialing
code, in which SUBADDRESS TX or
POLLING RX has been set. If you do so,
you cannot send faxes to the parties that
have a subaddress or password registered.
❚ To register a group under a one-touch
speed dialing key:
Use 4 (–) or e (+) to select the key under
which you want to register the group (01 to
12).
Ex:
• If a fax/telephone number has already been
registered in this key, 1-TOUCH SPD DIAL or
GROUP DIAL appears.
• If fax functions have been programmed into keys
marked 01 to 12 using PROG 1-TOUCH KEY in
the Additional Functions, PROG 1-TOUCH KEY
appears.
❚ To register a group under a coded
speed dialing code:
Press Coded Dial, then use the numeric
keys to enter the two digit code under
which you want to register the group (00 to
99).
Ex:
• If a fax/telephone number has already been
registered in this key, CODED SPD DIAL or
GROUP DIAL appears.
7
Press Set twice.
TEL=
GROUP DIAL
1.TEL NUMBER ENTRY
GROUP DIAL
A 21=
GROUP DIAL
03=
NOTE
GROUP DIAL
01=1-TOUCH SPD DIAL
ADD. REGISTRATION
3.GROUP DIAL
ADD. REGISTRATION
1.1-TOUCH SPD DIAL
ADDITIONAL FUNCTIONS
4.ADD. REGISTRATION
03 FAX_Chp3.qxd 6/17/04 12:44 PM Page 3-6