imageCLASS D880 Fax Guide
6-1
6
Special Features
This section explains special dialing features, such as dialing through a switchboard, dialing an overseas number,
and switching temporarily to tone dialing.
Dialing Through a Switchboard
A PBX (Private Branch Exchange) is an on-site telephone switchboard. If your machine is connected through a
PBX or other telephone switching system, you have to dial the outside line access number first, and then dial the
number of the party you are calling.
Dialing an Overseas Number (With Pauses)
When you dial or register an overseas number, you may need to insert a pause within or after the number. The
length and location of the pause depends on the telephone system of your country.
• The Function key will light up by pressing Function to be able to operate Delete or Clear.
NOTE
Special Dialing
Special Features
Chapter 6
1
Press FAX to set to the Fax Mode.
Ex:
2
Prepare the document and load it face
down into the ADF.
Ex:
The currently used memory is displayed.
Standby to scan.
• If you want to use the platen glass to send a
document, → p. 4-6.
3
Use the numeric keys to dial the
international access code.
Ex:
• If you enter the wrong number, press
Stop/Reset, then enter the correct number.
• For details on international access codes, contact
your local telephone company.
4
If necessary, press Redial/Pause to enter
a pause.
Ex:
• A pause entered within a number (p), is two
seconds long.
• For a longer pause, press Redial/Pause again to
insert another two-second pause. Alternatively,
you can change the length of the pause. (→ p. 9-5)
5
Use the numeric keys to dial the country
code, the area code, and the fax/telephone
number of the other party.
Ex:
• If you enter the wrong number, press Delete to
delete the last number, then enter the correct
number. Or, press Clear or Stop/Reset to delete
all the numbers you entered, then start again from
Step 3.
6
If necessary, press Redial/Pause to enter
a pause at the end of the number.
Ex:
• A pause at the end of a number (P), is fixed to 10
seconds.
7
Press Start to begin scanning.
• To cancel sending after dialing has started, press
Stop/Reset then 4 (–). (→ p. 4-7)
• To take advantage of the speed dialing
features of your machine, register
frequently used overseas numbers for one-
touch or coded speed dialing. (→ pp. 3-1,
3-3)
NOTE
TEL= 00p81123P
TEL= 00p81123
TEL= 00P
TEL= 00
DOCUMENT READY
MEM IN USE
0%
FAX 12/03/2004 15:30
FaxTel STANDARD
06 FAX_Chp6.qxd 6/18/04 12:12 PM Page 6-1