imageCLASS D880 Fax Guide

9-4
FAX SETTINGS
USER SETTINGS The basic operation settings in the Fax mode can be
specified.
1.TEL LINE SETTINGS Specify the telephone line settings.
1.USER TEL NO. Your telephone and fax number can be registered.
(→ p. 2-4)
2.TEL LINE TYPE Selects the telephone line type. (→ p. 2-6)
TOUCH TONE The telephone line is set for touch-tone dialing.
ROTARY PULSE The telephone line is set for rotary pulse dialing.
3.TX START SPEED Sets the transmission speed for all documents you send.
33600bps/14400bps/9600bps/7200bps/4800bps/
2400bps
4.RX START SPEED Sets the transmission speed for all documents you receive.
33600bps/14400bps/9600bps/7200bps/4800bps/
2400bps
2.UNIT NAME You can register your name (or your company’s name).
(→ p. 2-5)
3.TX TERMINAL ID Prints your ID (transmitting terminal ID) on each page
you send. (→ p. 2-3)
1.TTI POSITION OUTSIDE IMAGE: Terminal ID is printed outside the
image border.
INSIDE IMAGE: Terminal ID is printed inside the
image border.
2.TEL NUMBER MARK Selects the prefix for the identification header number.
FAX, TEL
4.DENSITY CONTROL Sets the density of the documents.
LIGHT Set for dark documents.
STANDARD Set for the documents of normal density.
DARK Set for light documents.
5.PROG 1-TOUCH KEY Programs a fax function into a One-Touch key. The
programmed fax function will be executed by directly
pressing the corresponding One-Touch key. You do not
need to press Function before pressing the One-Touch
key.
01 - 12 Select a One-Touch key (01 to 12) in which you want to
program the fax function.
USE Uses the PROGRAM 1-TOUCH KEY function.
The following functions can be programmed:
1.REPORT;
2.DELAYED TX;
3.FAX MONITOR;
4.MEMORY REFERENCE;
5.BOOK SENDING.
DO NOT USE Disables the PROGRAM 1-TOUCH KEY function.
Name Description
(The factory default setting is in bold face.)
09 FAX_Chp9.qxd 6/17/04 2:37 PM Page 9-4