imageCLASS D880/D860/D861 Basic Guide
1-8
This machine provides an energy saver function. When no operations are performed for about five minutes, the
machine automatically enters the energy saver mode.
• The time until the machine enters the energy saver mode can be specified in the range from 3 to 30
minutes. You can also turn off the energy saver function. (→ p. 7-4)
• The energy saver function does not activate when the machine is in the following status:
– When printing out copies or faxes* or other pages
– When sending or receiving faxes*
– While a copy job is saved in memory or when the reserve copy or other functions are operating, or
when the In Use/Memory indicator lights up*
– When paper jams occur
– When the platen unit is not returned to the original position
– When an error code appears and the Alarm indicator flashes
– When PRESS SET KEY is displayed
* Only for the imageCLASS D880 model
Setting the Energy Saver Mode Manually
Restoring from the Energy Saver Mode
NOTE
Energy Saver Mode
1
Press Energy Saver.
• The LCD display is turned off and the Energy Saver key lights up.
• Right after the machine is restored from the energy saver mode, or right after copying finishes, wait
about five seconds before pressing Energy Saver.
NOTE
1
Press Energy Saver.
• The Energy Saver key goes off and the machine enters the standby mode.
• The machine can be restored from the energy saver mode immediately. However, it may vary according
to room temperature and circumstances.
NOTE
01 RG_Chap1.qxd 6/17/04 11:56 AM Page 1-8