imageCLASS D880/D860/D861 Basic Guide
5-8
5
Rock the cartridge 5 or 6 times to distribute
the toner evenly.
• If toner is not evenly distributed inside the
cartridge, it can cause streaking or fading
on the printed page.
6
Place the cartridge on a flat and stable
surface. And, grip the sealing tape tab and
snap it in the direction as shown below.
Make sure that the tab itself is detached
from the cartridge.
7
While grasping the cartridge with one
hand, firmly and slowly pull the sealing
tape tab with the other hand to remove the
sealing tape completely. Throw the tape
away.
• To avoid breaking the tape, do not pull the
tape out at an upward or downward angle.
8
Hold the cartridge as shown below, so that
the Canon logo label is facing up.
9
Position the arrow mark on the cartridge
toward the inside of the machine, and
gently slide the cartridge into the machine
as far as it will go.
• When the cartridge is installed or removed
from the machine, the drum’s protective
shutter opens. Do not touch the
photosensitive drum. Finger oil could cause
a deterioration in copy quality.
10
Close the cartridge cover and slide the
platen unit to the original position.
NOTE
NOTE
05 RG_Chap5.qxd 6/17/04 2:26 PM Page 5-8