Printer Driver Installation Guide (pdf)

Install the printer driver.

Wired LAN or Wireless LAN Connection

Select [Standard], select the [Reactivate Printers in the Sleep Mode and Search] check box, and click

[Next].

● If you are using the printer in an IPv6 environment, click [Detailed Settings]

select [Standard TCP/IP

Port]

click [OK].

About [Detailed Settings]

You can select the port type.

[MFNP Port] (only for IPv4 environment)

This is a port that enables automatic detection of the printer's IP address. Even if the IP address of the

printer is changed, the connection between the printer and computer will be maintained, provided that

they belong to the same subnet. Therefore, you do not need to add a new port every time the IP address

is changed. If you are using the printer in an IPv4 environment, choose this setting.

[Standard TCP/IP Port]

This is a standard Windows port. Whenever the IP address of the printer is changed, a new port must be

added.

Select check box for the printer that you want to install from the [Printer List].

● If you want to use the printer in an IPv6 environment, click the [IPv6 Devices] tab.

Installing