Printer Driver Installation Guide (pdf)

● Turn OFF all of the devices, and then turn them ON again.
● Wait for a while, and try again to connect to the network.
Check whether the printer is turned ON.
● If the printer is turned ON, turn it OFF, and then turn it back ON.
Check the installation site of the printer and the wireless router.
● Is the printer too far from the wireless router?
● Are there any obstacles such as walls between the printer and the wireless router?
● Are there any appliances such as microwave ovens or digital cordless phones that emit radio
waves near the printer?
Reset the wireless LAN settings.
When you need to manually set up the connection
If the wireless router is set up as described below, enter the required information manually.
● The stealth function is enabled.
● ANY connection refusal
*
is enabled.
● The automatically generated WEP key (hexadecimal) is selected.
*
A function in which the wireless router refuses the connection if the SSID of the device to be connected is set to
"ANY" or is blank.
When you need to change the settings of the wireless router
If the wireless router is set up as described below, change the settings of the router.
● MAC address ltering is enabled.
Troubleshooting
63