Printer Driver Installation Guide (pdf)

Connecting via Wired LAN
23HC-011
Connect the printer to a computer via a wired router. Use a LAN cable to connect the printer and the router.
Things to Check before Starting (Wired LAN)(P. 71)
Things to Check before Starting (Wired LAN)
● Have the computer and the router
been connected correctly via a LAN
cable? For more information, see the
instruction manuals for the devices
you are using, or contact the
manufacturer.
● Have the network settings been
completed on the computer? If the
network has not been set up properly,
you will not be able to use the printer
on the wired LAN network, even if you
perform the rest of the procedure
below.
When switching the connection method from wireless LAN to wired LAN
You need to uninstall the currently installed printer driver, congure the wired LAN connection, and then
reinstall the printer driver.
● The printer does not come with a router or LAN cable. Have them ready as necessary. Use a Category 5 or
higher twisted pair cable for the LAN.
● Make sure that there are ports available on the router to connect the printer and the computer.
● See the "User's Guide" for the Ethernet types supported by the printer.
● Wired LAN and wireless LAN cannot be used at the same time.
● If you are using the printer in your oce, consult your network administrator.
Appendix
71