imageCLASS MF3110 Basic Guide

LCD Messages
9-10
Troubleshooting
9
SUPPLY REC. PAPER
Cause No paper is loaded in the cassette or multi-purpose feeder.
Remedy Load paper in the cassette or multi-purpose feeder. (See "Loading Paper," on p.
2-4.) Make sure the paper stack in the cassette does not exceed the capacity of
the cassette.
Load paper in the multi-purpose feeder one by one.
If you load paper while making copies, do not load a different paper size.
On the second line in the LCD the message <CASSETTE> or <TRAY> and the
paper size may appear. In this case, load the corresponding paper in the
cassette or multi-purpose feeder.
LD_Basic_US.book Page 10 Wednesday, June 30, 2004 2:02 PM