imageCLASS MF3110 Basic Guide

Setting Enlarging/Reducing
5-5
Copying
5
Enlarging/Reducing Using Custom Copy Ratios
1 Press [Enlarge/Reduce] twice.
2 Use the numeric buttons to enter the copy ratio ➞ press [Set].
• You can enter the copy ratio from 50% to 200%, selectable in 1% increments.
• Even after entering the copy ratio, you can use [ (-)] or [ (+)] to adjust the copy
ratio. To increase the copy ratio, press [ (+)]. To decrease the copy ratio, press
[ (-)].
NOTE
• Enlarging or reducing using a custom copy ratio is not available with the 2 on 1 copy
function.
• To return the copy ratio to 100%, press [Enlarge/Reduce] several times to display
<DIRECT 100%> ratio
➞ press [Set].
You can also return the ratio to 100% using a preset copy ratio. (See "Enlarging/
Reducing Using Preset Copy Ratios," on p. 5-4.)
➞
ZOOM 50-200%
- 80% +
80% LTR
TEXT/PHOTO
01
LD_Basic_US.book Page 5 Wednesday, June 30, 2004 2:02 PM