imageCLASS MF3110 Basic Guide

LCD Messages
9-9
Troubleshooting
9
MEMORY FULL
Cause 1 The machine's memory is full because the collate copy or 2 on 1 copy function
was set when a large document is loaded.
Remedy Divide the document and copy each part separately.
Cause 2 You tried to reserve more than 11 copy jobs.
Remedy The machine can store up to 10 copy jobs in memory. Wait until the current copy
job completes, or use [Status Monitor] to delete the reserved copy jobs in
memory.
PRINTER DATA ERROR
Cause When you canceled a job being processed, the next job on the spooled job list
may have been also deleted.
Remedy Check if the job that immediately follows the job being processed has been
deleted on the spooled job list. Disconnect the USB cable and connect it again,
or unplug the machine and plug it in again to clear the error message.
REC. PAPER JAM
Cause There is a paper jam.
Remedy Clear the paper jam (See "Clearing Jams," on p. 9-1) and reload paper in the
cassette or multi-purpose feeder. Then reset the machine by opening the front
cover and then closing it.
REMOVE MP PAPER
Cause Paper was loaded in the multi-purpose feeder when the machine is scanning a
document for copying.
Remedy Remove the paper from the multi-purpose feeder. After removing the paper, the
machine will start making a copy automatically. If you want to use paper in the
multi-purpose feeder to make a copy, load paper in the multi-purpose feeder
first, then press [Start].
LD_Basic_US.book Page 9 Wednesday, June 30, 2004 2:02 PM