imageCLASS MF3110 Set-Up Instructions

Assemble the cassette and load paper.
3 Attach the extension to the cassette.The slots
➊ are keyed and must be inserted at a 90°
angle. Once inserted, fold the extension as
shown
➋.
To load Legal-size paper:
Pull the blue tab ➊ and extend the cassette ➋ as far as it will go. Keep the rear paper end guide to LT R
size mark. If you are not using Legal-size paper, skip to the next step without extending the cassette.
1 Insert the output tray into the front slot on
the machine.
2 Pull out the paper cassette.
4 Pinch and slide the rear paper end guide to
match the size of paper.
CF-LDL US1 SI.qxd 6/29/04 10:25 AM Page 3