User Guide

1
2
3
4
5
6
TOP
Back Previous Next
3-2
Table of Contents
Index
Advanced Fax
Features
Advanced Copy
Features
System Monitor
Reports and Lists
Troubleshooting
Appendix
Checking Job and Machine Status
System monitor enables you to view and print the
transmission/reception results, check remaining memory,
monitor the status of fax, and check print and scan counts.
■ Checking Print Status
You can check and delete the print jobs sent from a computer.
1. Press [System Monitor].
2. Use [ ] or [ ] to select <PRINT
STATUS>, then press [OK].
3. Use [ ] or [ ] to view the job list.
4. If you want to delete the print job, press [OK],
then press [ ] to select <YES>.
5. Press [Stop/Reset] to return to standby
mode.
■ Checking Print and Scan Counts
1. Press [System Monitor].
2. Use [ ] or [ ] to select <COUNTER>,
then press [OK].
3. Use [ ] or [ ] to view the print or scan
counts (up to 65534 pages).
4. Press [Stop/Reset] to return to standby
mode.
■ Checking and Deleting Documents
Stored in Memory
1. Press [System Monitor].
2. Use [ ] or [ ] to select <TX STATUS>,
then press [OK].
3. Use [ ] or [ ] to check the desired
document.
4. If you want to delete the document, press
[OK], then press [ ] to select <YES>.
5. Press [Stop/Reset] to return to standby
mode.