imageCLASS MF3200 Series Software Guide

1
2
3
4
5
6
TOP
Back Previous Next
2-47
Table of Contents
Index
Introduction
Printing
Scanning a
Document
PC Faxing
Troubleshooting
Appendix
Matching Tab
[Matching Mode] Specifies the procedure for color correction.
Driver Matching Mode:
Processes color in the printer driver. The
settings specified in [Matching Method] and
[Monitor Profile] will be enabled.
Gamma Adjustment:
Performs gamma adjustment with the
gamma correction value specified in the
[Gamma] box.
[Matching Method] Specifies the matching method by assigning
highest priority when the [Driver Matching
Mode] is selected in the [Matching Mode]
box.
Perceptual [Monitor Color Matched]:
Gives priority to matching the hue of the
color on the monitor with the color of the
printed output.
Colorimetric:
Gives priority to reducing the color difference
between the original document on the
screen (a logo, for example) and the printed
output.
Saturation:
Gives priority to vividness in matching.
NOTE
This option can be selected only when [Driver Matching Mode] is
selected for [Matching Mode].
[Monitor Profile] Specifies the setting suitable for your monitor
when the [Driver Matching Mode] is selected
in the [Matching Mode] box.
NOTE
– This option can be selected only when [Driver Matching Mode]
is selected for [Matching Mode].
– In the case where several gamma values are provided for one
option, select the higher gamma value to obtain better results if
the printed image is lighter than that of the monitor.
If the monitor is set to a custom setting, it is difficult to produce
printed output similar to the color of the monitor when
performing matching.
– If the monitor is set to a custom setting, it is difficult to produce
printed output similar to the color of the monitor when
performing matching.