Facsimile Guide Please read this guide before operating this equipment. After you finish reading this guide, store it in a safe place for future reference.
Manuals for the Machine The manuals for this machine are divided as follows. Please refer to them for detailed information. Depending on the system configuration and product purchased, some manuals may not be needed. Guides with this symbol are printed manuals. • Setting Up the Machine • Software Installation • Network Setting (Only for the CD-ROM Guides with this symbol are PDF manuals included on the accompanying CD-ROM. Set-Up Sheet MF5770 model.
This equipment conforms to the essential requirements of EC Directive 1999/5/EC. We declare that this product conforms to the EMC requirements of EC Directive 1999/5/EC at nominal mains input 230 V, 50Hz although the rated input of the product is 200–240 V, 50/60Hz. This equipment has been tested in a typical system to comply with the technical requirements of EMC Directive. Use of shielded cable is required to comply with the technical requirements of EMC Directive.
Trademarks Canon® is a registered trademark, and UHQ™ is a trademark of Canon Inc. IBM® is a registered trademark. Microsoft® and Windows® are registered trademarks of Microsoft Corporation. Other brand and product names may be trademarks or registered trademarks of their respective companies. As an ENERGY STAR® Partner, Canon has determined that the machine meets the Energy Star guidelines for energy efficiency. Super G3 is a phrase used to describe the new generation of fax machines that use ITU-T V.
Contents Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v How to Use This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .v Symbols Used in This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .v Keys Used in This Manual . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 5 Receiving Faxes Setting the Receive Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Receiving Faxes Automatically: FaxOnly Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Receiving Both Faxes and Voice Calls Automatically: FaxTel Mode . . . . . . . . . . . . . . . . . . . Receiving When an Answering Machine Is Connected: AnsMode . . . . . . . . . . . . . . . . . . . .
Preface Thank you for purchasing the Canon LaserBase MF5750/MF5770. Please read this manual thoroughly before operating the machine in order to familiarize yourself with its capabilities, and to make the most of its many functions. After reading this manual, store it in a safe place for future reference.
1 Introduction CHAPTER This chapter describes the operation panel and the standby display used for the fax function of the machine. Customer Support The machine is designed with the latest technology to provide trouble-free operation. If you encounter a problem with the machine's operation, try to solve it by using the information in Chapter 7, "Troubleshooting.
e n Alarm indicator Flashes red when the machine has a problem such as a paper jam. (The error message is displayed in the LCD.) o f FAX key g Menu key Displays messages and prompts during operation. Also displays selections, text, and numbers when specifying settings. Customizes the way the machine operates. h [ (-)] or [ (+)] keys q Introduction Scroll through the selections so you can see other settings. i j Clear key Clears an entry in the LCD.
Standby Display The standby display differs depending on which mode is selected. The standby display in the Fax mode is as follows: ■ Fax Mode 1 Receive mode Introduction Date & time Image quality NOTE For the standby display in the Copy mode and the Scan mode, see Chapter 1, "Introduction," in the User’s Guide.
Registering Information in Your Machine 2 CHAPTER This chapter explains how to register the information necessary for sending and receiving faxes. NOTE • For details on how to enter characters or symbols when you come to step that requires you to enter a name or number, see Chapter 2, "Operation," in the Quick Reference Guide. • You can print the USER DATA LIST to check the sender information you have registered. (See "Printing the USER DATA LIST," on p. 6-6.
Entering the Date and Time NOTE You can print the USER DATA LIST to check the current setting. (See "Printing the USER DATA LIST," on p. 6-6.) 2 1 Press [Menu]. 2 Press [ (-)] or [ (+)] to select ➞ press [OK]. 3 Press [ (-)] or [ (+)] to select ➞ press [OK]. 4 Use the numeric keys to enter the date (day/month/year) and time (in 24-hour format) ➞ press [OK]. Registering Information in Your Machine DATE/TIME SETTING 01/02 '05 11:01 ➞ TIMER SETTINGS 2.
9 Use the numeric keys to enter your name (max. 24 characters, including spaces) ➞ press [OK]. For details on how to enter characters or symbols, see "2.3 Enter Characters," in the Quick Reference Guide. UNIT NAME CANON 10 :A ➞ USER SETTINGS 3.TX TERMINAL ID Press [Stop/Reset] to return to the standby display. Setting the Telephone Line Type NOTE You can print the USER DATA LIST to check the current setting. (See "Printing the USER DATA LIST," on p. 6-6.) 1 Press [Menu].
1 Press [Menu]. 2 Press [ (-)] or [ (+)] to select ➞ press [OK]. 3 Press [ (-)] or [ (+)] to select ➞ press [OK]. 4 Press [ (-)] or [ (+)] to select ➞ press [OK]. 5 Press [ (-)] or [ (+)] to select ➞ press [OK]. 6 Press [ (-)] or [ (+)] to select the access type of your switching system. 2 ● If you selected : Registering Information in Your Machine ❑ Press [OK]. ● If you selected : ❑ Press [OK].
Speed Dialing 3 CHAPTER This chapter explains how to simplify the dialing process by assigning the recipient names and their fax/telephone numbers to only one or two keys. Speed Dialing Methods Speed dialing allows you to dial fax/telephone numbers by simply pressing one or a few keys. The following speed dialing methods are available: ■ One-Touch Speed Dialing Register a fax/telephone number for one-touch speed dialing (see "Registering One-Touch Speed Dialing," on p.
1 Press [Menu]. 2 Press [ (-)] or [ (+)] to select ➞ press [OK]. 3 Press [ (-)] or [ (+)] to select <1-TOUCH SPD DIAL> ➞ press [OK]. 4 Press [ (-)] or [ (+)] to select a one-touch speed dialing key (01 to 11) ➞ press [OK] twice. You can also select a key by pressing the one-touch speed dialing key. 5 Use the numeric keys to enter the fax/telephone number you want to register (max. 120 digits, including spaces and pauses) ➞ press [OK] twice.
■ Deleting an Entire Entry Follow steps 1 to 4 of "Registering One-Touch Speed Dialing" (see p. 3-1). In step 5, press and hold [Clear] to delete the registered number ➞ press [OK] ➞ [Stop/Reset]. NOTE • When deleting the registered number, the registered name is cleared automatically. • You can also press [ (-)] or [Clear] repeatedly to delete the registered number. Registering Coded Speed Dialing Before you can use coded speed dialing (see "Coded Speed Dialing," on p.
Changing or Deleting an Entry ■ Changing a Fax/Telephone Number You Registered Follow steps 1 to 4 of "Registering Coded Speed Dialing" (see p. 3-3). In step 5, press and hold [Clear] to delete an entire fax/telephone number ➞ use the numeric keys to enter a new number ➞ press [OK] ➞ [Stop/Reset]. NOTE You can also press [ (-)] or [Clear] repeatedly to delete the registered number. ■ Changing a Name You Registered Follow steps 1 to 5 of "Registering Coded Speed Dialing" (see p. 3-3).
4 Specify an empty one-touch speed dialing key or coded speed dialing code that you want to set as the group dial. ● To register a group under a one-touch speed dialing key: ❑ Press [ (-)] or [ (+)] to select a one-touch speed dialing key (01 to 11) ➞ press [OK] twice. You can also select a key by pressing the one-touch speed dialing key. ● To register a group under a coded speed dialing code: ❑ Press [Coded Dial] ➞ use the numeric keys to enter the two-digit code (00 to 99) ➞ press [OK] twice.
Printing Speed Dialing Lists You can print lists of the recipients registered for speed dialing. You may want to keep these lists near the machine to refer to them when dialing. 1 Press [Menu]. 2 Press [ (-)] or [ (+)] to select ➞ press [OK]. 3 Press [ (-)] or [ (+)] to select ➞ press [OK]. 4 Press [ (-)] or [ (+)] to select the list you want to print ➞ press [OK].
Sending Faxes 4 CHAPTER This chapter describes the different ways to send faxes. It also explains how to adjust scan settings to improve the image quality. Sending Methods There are two methods of sending faxes from the machine: - Memory Sending - Manual Sending NOTE • You can also fax the documents from your computer.
3 Dial the recipient's fax/telephone number. For details on the different dialing methods, see "Dialing Methods," on p. 4-4. 4 Press [Start]. If you are using the ADF, the fax will be transmitted automatically. If you are using the platen glass, you will be prompted when the page has been scanned. Place the next page (for a multipage document) ➞ press [Start]. To start sending, after all the pages have been scanned, press [OK]. NOTE To cancel memory sending, press [Stop/Reset].
7 Ask the recipient to set his fax machine to receive faxes. 8 When you hear a high-pitched signal, press [Start] ➞ hang up the handset. NOTE • To cancel manual sending, press [Stop/Reset]. • If the offhook alarm starts beeping, make sure that the handset is resting properly on the handset cradle. The offhook alarm can be turned off. (See <4. OFFHOOK ALARM> of "Menu Descriptions," on p. 8-2.) Improving Faxed Images There are several settings that allow you to improve the quality of faxed documents.
Dialing Methods There are several ways of dialing the fax/telephone number of the party to which you want to send a fax.
Coded Speed Dialing 1 Press [Coded Dial] ➞ enter the desired two-digit code (00 to 99) with the numeric keys. The number registered under that coded speed dialing code is displayed. appears if no fax/telephone number is assigned to the coded speed dialing code you entered. If
Redialing a Busy Number There are two methods of redialing: - Manual Redialing - Automatic Redialing Manual Redialing Press [Redial/Pause] to redial the last number entered with the numeric keys used to send a fax. NOTE • To cancel manual redialing, press [Stop/Reset]. • The last number entered with the numeric keys will be deleted when you unplug and plug the power cord. • The number entered for a voice call is not stored for redial number.
● If you selected : ❑ Press [OK] twice. ❑ Press [ (-)] or [ (+)], or use the numeric keys to enter the number of times you want the machine to redial ➞ press [OK] twice. You can set the machine to redial between 1 to 10 times. REDIAL TIMES 2TIMES ➞ REDIAL INTERVAL 2MIN. ❑ Press [ (-)] or [ (+)], or use the numeric keys to enter the time interval between redialing ➞ press [OK]. You can set the time interval between 2 to 99 minutes. 6 4MIN. ➞ TX SETTINGS 4.
● To use regular dialing: ❑ Use the numeric keys to enter the fax/telephone number ➞ press [OK]. You can dial up to one destination. Press [Redial/Pause] to redial the last number dialed with the numeric keys. ● To use directory dialing: ❑ Press [Directory]. ❑ Press a numeric key which contains the first letter of the desired destination. ❑ Press [ (-)] or [ (+)] to scroll through the required names until you find the desired destination ➞ press [OK].
2 Adjust any necessary settings for your document. • Press [Image Quality] to select the fax resolution. (See "Adjusting the Image Quality (Fax Resolution)," on p. 4-3.) • Press [Exposure] to select the scan density. (See "Adjusting the Exposure (Scan Density)," on p. 4-3.) 3 Use the numeric keys to dial the international access code. For details on international access codes, contact your local telephone company. NOTE If you enter a wrong number, press [ the digits you entered.
3 Enter a destination using the numeric keys on your telephone or using a one-touch speed dialing key, coded speed dialing code, [Redial/Pause], or the numeric keys on the machine. 4 When the recorded message of the information service answers, press [ When [ ] to switch to tone dialing. ] is pressed, is displayed in the LCD. If your telephone line uses tone dialing, go to the next step. 5 Use the numeric keys on the machine to enter the numbers requested by the information service.
Receiving Faxes 5 CHAPTER This chapter describes the different ways to receive faxes. It also explains how to set the receive mode and to cancel the documents the machine is receiving. Setting the Receive Mode Follow this procedure to set the receive mode: 1 Press [Menu]. 2 Press [ (-)] or [ (+)] to select ➞ press [OK]. 3 Press [ (-)] or [ (+)] to select ➞ press [OK]. Press [ (-)] or [ (+)] to select the receive mode ➞ press [OK].
■ When You Receive a Fax Call The machine will receive the fax automatically. ■ When You Receive a Voice Call You will not be able to answer the call. NOTE • If you connect a telephone to the machine and enable the setting, the telephone will ring when the machine receives a voice call, and then you can answer the call. • You can select the number of rings. (See <3. INCOMING RING> of "Menu Descriptions," on p. 8-5.
1 Press [Menu]. 2 Press [ (-)] or [ (+)] to select ➞ press [OK]. 3 Press [ (-)] or [ (+)] to select ➞ press [OK]. 4 Press [ (-)] or [ (+)] to select ➞ press [OK] twice. 5 Press [ (-)] or [ (+)] to select the time 0 to 30 seconds that the machine takes to check whether a call is fax or voice call ➞ press [OK] twice.
■ When You Receive a Voice Call The answering machine will record any voice messages. Receiving Faxes Manually: Manual Mode If you want to select , check the following: ■ Select This Mode If: • you only have one telephone line for both fax and telephone use. • you receive mainly voice calls and sometimes faxes. ■ You Will Need to: • set . (See "Setting the Receive Mode," on p. 5-1.) • connect a telephone to the machine. (See "Connect telephone cable," in the Set-Up Sheet.
Receiving Faxes While Performing Other Tasks Since the machine is a multitasking device, it can receive faxes and voice calls while you are performing other tasks. • If you receive a fax while you are performing certain tasks, the machine stores the incoming fax in the memory. Then, as soon as you finish your task, the machine automatically prints the fax.
6 Reports and Lists CHAPTER This chapter explains how to print out the transaction reports and the lists of settings and recipients registered in the machine. Summary of Reports and Lists The table below shows the reports and lists that can be printed from the machine. Refer to the pages indicated for more details. Report or List Description Details 1-TOUCH LIST Lists the fax/telephone numbers and names registered for one-touch speed dialing. p.
ACTIVITY REPORT Printing the ACTIVITY REPORT By default, the machine is set to print an ACTIVITY REPORT after every 20 transactions. Transactions in an ACTIVITY REPORT are listed chronologically. 01/02 2005 17:28 FAX 1234567 CANON 001 *************************** AC T I V I T Y R E P O RT *** *** *************************** ST. TIME * 01/02 16:16 * 01/02 16:27 * 01/02 16:30 DESTINATION TEL/ID NO. 2 887 0166 MODE PGS.
Adjusting the ACTIVITY REPORT Setting You can set the machine to turn on or off automatic printing of the ACTIVITY REPORT. 1 Press [Menu]. 2 Press [ (-)] or [ (+)] to select ➞ press [OK]. 3 Press [ (-)] or [ (+)] to select ➞ press [OK]. 4 Press [ (-)] or [ (+)] to select ➞ press [OK]. 5 Press [ (-)] or [ (+)] to select the setting you want ➞ press [OK].
■ ERROR TX REPORT 01/02 2005 17:21 FAX 1234567 CANON 001 *************************** E R RO R T X R E P O RT *** *** *************************** Error description TX FUNCTION WAS NOT COMPLETED TX/RX NO RECIPIENT ADDRESS DESTINATION ID ST.
Adjusting the RX REPORT Setting The machine can print an RX (reception) report after receiving a document. You can set it to print every time it receives a document, or only when an error occurs. Alternatively, you can disable printing the report. By default, the machine is set not to print an RX REPORT. 01/02 2005 17:52 FAX 1234567 CANON 001 ********************* R X R E P O RT *** *** ********************* Description RECEPTION OK TX/RX NO RECIPIENT ADDRESS DESTINATION ID ST. TIME TIME USE PGS.
Printing the USER DATA LIST The USER DATA LIST allows you to check the current settings of the machine as well as the registered sender information. (See "Registering Sender Information," on p. 2-1.) 01/02 2005 13:36 FAX 1234567 CANON 001 **************************** USER'S DATA LIST *** *** **************************** 1. PAPER SETTINGS CASSETTE PAPER SIZE PAPER TYPE MP TRAY PAPER SIZE PAPER TYPE 2. COMMON SETTINGS Reports and Lists 6 A4 PLAIN PAPER A4 PLAIN PAPER 1 Press [Menu].
Troubleshooting 7 CHAPTER This chapter describes the problems you might encounter during fax operations and their remedies. It also explains what to do if you cannot solve the problem by yourself. LCD Messages The following messages are displayed in the LCD when the machine performs a function or if it encounters an error. This section describes messages related to fax functions. For other messages, see Chapter 9, "Troubleshooting," in the User’s Guide.
CHECK PAPER SIZE Cause The size of the paper in the cassette or multi-purpose feeder is different from that of the paper specified in in of the Menu. Remedy 1 Load the correct paper size or change in of the Menu. For more information, see the following: • Chapter 2, "Paper Handling," in the User’s Guide • Chapter 5, "Copying," in the User’s Guide Then reset the machine by opening the front cover and then closing it.
NOT REGISTERED Cause The one-touch speed dialing key or coded speed dialing code you entered is not registered. Remedy Register the one-touch speed dialing key or coded speed dialing code. For more information, see the following: • "Registering One-Touch Speed Dialing," on p. 3-1 • "Registering Coded Speed Dialing," on p. 3-3 RECEIVED IN MEMORY Cause The machine received the fax in the memory because paper or toner ran out, a paper jam occurred, or incorrect paper size was loaded.
#0003 Cause 1 A document longer than one foot is being sent from the feeder. Remedy Divide the document into pages and resend from the platen glass. Cause 2 Data is too large and taking too long to send a document. Remedy Reduce the scan resolution and resend. Cause 3 It’s taking too long to receive a page. Remedy Contact the other party and have them reduce the scan resolution or split the document into segments and resend.
#0018 Cause The other fax did not respond to redialing. The document was not sent because the other fax machine was busy and did not respond within 55 seconds. Remedy Wait for a while and try again. If you still cannot send the document, contact the other party and have them check if their fax machine is turned on. If the line is busy, wait more and try again. #0037 Cause The memory is full. Remedy Print out the faxes received in the memory.
Troubleshooting 7 7-6 Q Is the document loaded? A Remove the document, stack it if necessary, and place it on the platen glass or load it in the ADF correctly. For more information, see Chapter 3, "Document Handling," in the User’s Guide. Q Is the one-touch speed dialing key or coded speed dialing code you entered registered for the feature you want to use? A Check the one-touch speed dialing key or coded speed dialing code and make sure it is registered correctly. (See Chapter 3, "Speed Dialing.
Q Did the receiving fax machine answer within 55 seconds (after all automatic redialing attempts)? A Contact the other party and have them check their fax machine. For an overseas call, add pauses to the registered number. (See "Dialing an Overseas Number (With Pauses)," on p. 4-8.) Q Is the In Use/Memory indicator lighting? A The In Use/Memory indicator may light, which means the extension phone is busy. Please wait until the extension phone becomes free.
Receiving Problems Cannot receive a fax automatically. Troubleshooting 7 Q Is the machine set to receive automatically? A For the machine to receive faxes automatically, the receive mode must be set to , , or . (See Chapter 5, "Receiving Faxes.") If you have set , confirm that an answering machine is connected to the machine and that it is turned on with an outgoing message properly recorded.
Cannot receive a document manually. Q Is the machine set to receive manually? A For the machine to receive faxes manually, the receive mode must be set to . (See Chapter 5, "Receiving Faxes".) Q Did you press [Start], or dial the remote receiving ID after hanging up the handset? A Always press [Start], or dial the remote receiving ID before hanging up the handset. Otherwise you will disconnect the call. Print quality is poor.
Q Is any toner left in the cartridge? A Replace the cartridge with a new one. For more information, see Chapter 8, "Maintenance," in the User’s Guide. A Select in in in of the Menu. With this setting, the machine will not store documents in the memory even if the toner has run out. (See <7. TONER SUPPLY LOW> of "Menu Descriptions," on p. 8-6.) Q Is the correct paper loaded in the cassette? A Make sure paper is loaded in the cassette.
Errors occur frequently while receiving. Q Are the telephone lines in proper condition? Or do you have a good connection? A Lower the reception speed. (See <4. RX START SPEED> of "Menu Descriptions," on p. 8-2.) Q Is the sending fax machine functioning properly? A Call the sender and have them check that their fax machine is functioning properly. Telephone Problems You cannot dial. Q Is the telephone line connected properly? A Make sure all line connections are secure.
If a Power Cut Occurs If power is suddenly lost due to an outage or accidental unplugging, a built-in battery retains the user data settings and the speed dialing settings. Any sent or received documents stored in the memory are backed up for about 3 minutes. During a power cut, functions are limited as follows: • You cannot send, receive, copy, scan, or print documents. • You may not be able to make telephone calls using a telephone connected to the machine, depending on the type of telephone you use.
8 Machine Settings CHAPTER This chapter explains how to adjust machine settings. The list of all the settings is also provided for your reference. Accessing the Machine Settings 1 Press [Menu]. 2 Press [ (-)] or [ (+)] to select the menu you want to change ➞ press [OK]. You have now accessed the settings in the USER DATA LIST. 3 Press [ (-)] or [ (+)] to select the sub menu you want to change ➞ press [OK]. NOTE • For details on sub menus, see "Menu Descriptions" on p.8-1.
Name 2. USER SETTINGS 1. TEL LINE SETTINGS Machine Settings Specifies the telephone line settings. Your fax/telephone number can be registered within 20 digits, including spaces. (See "Registering Your Fax/ Telephone Number and Name," on p. 2-2.) 2. TEL LINE TYPE Selects the telephone line type. (See "Setting the Telephone Line Type," on p. 2-3.) ROTARY PULSE The telephone line is set for touch tone dialing. The telephone line is set for rotary pulse dialing. 3.
Name 6. RX RESTRICTION Descriptions Sets whether to receive a fax by detecting the TSI (Transmitting Subscriber Identification) signal, used to identify the sending fax machine. OFF All receptions are conducted. ON Receives the fax only from the sending fax machine that sends the TSI signal. 1. TX REPORT PRINT ERROR ONLY REPORT WITH TX IMAGE Sets the settings related to report functions. Enables/disables automatic printing of a transmission report.
Name 4. TX SETTINGS 1. ECM TX Machine Settings The ECM (Error Correction Mode) transmission is turned on or off. All transmissions are conducted with ECM if the other party's fax supports ECM. OFF ECM is turned off. 2. PAUSE TIME Sets the length of the pause you insert into a dialing sequence. 1SEC to 15SEC (4SEC) 3. AUTO REDIAL Sets whether to perform automatic redial when the other line is busy or no answer. OFF 8-4 Sets the transmission functions.
Name Enables/disables automatic scanning of documents after the fax number is entered. ON Scanning begins automatically in 5 or 10 seconds after you enter the fax number. OFF Press [Start] to scan document. Otherwise, AUTO CLEAR function activates and the LCD returns to standby display after 1 minute. (See Chapter 10, "Machine Settings," in the User's Guide.) 5. RX SETTINGS 1. ECM RX Sets the reception functions. The ECM (Error Correction Mode) reception is turned on or off.
Name 4. MAN/AUTO SWITCH ON OFF ON Enables/disables remote receiving. The machine enables remote receiving. REMOTE RX ID OFF You can dial code on the remote extension to start receiving a document. A combination of two characters using 0 to 9, and # is possible. The default character is 25. The machine disables remote receiving. 6. RX REDUCTION ON Machine Settings Sets the length of time to elapse before the machine switches to the document receiving.
Name 1. FAX DEFAULT 1. SCAN DENSITY Sets the functions of FAX DEFAULT, and COUNTRY SELECT. Sets the default for the fax functions. Sets the scan density. STANDARD Suitable for standard documents. DK Suitable for light documents. LT Suitable for dark documents. 2. RESOLUTION Sets the fax resolution. STANDARD Suitable for most text-only documents. FINE Suitable for fine-print documents. PHOTO Suitable for documents that contains photographs.
ADD. REGISTRATION Name 1. 1-TOUCH SPD DIAL Registers the other party's fax/telephone number (max. 120 digits, including spaces). 2. NAME Registers the other party's name (max. 16 characters, including spaces). Registers the information on coded speed dialing. (See "Registering Coded Speed Dialing," on p. 3-3.) Up to 100 destinations can be registered. 1. TEL NUMBER ENTRY Registers the other party's fax/telephone number (max. 120 digits, including spaces). 2.
9 Appendix CHAPTER This chapter lists the specifications for the fax function of the machine, and the index. Specifications Specifications are subject to change without notice. Facsimile Applicable Line Public Switched Telephone Network (PSTN) Compatibility G3 Data Compressing System MH, MR, MMR, JBIG Modem Speed 33.6/31.2/28.8/26.4/24/21.6/19.2/16.8/14.4/12/9.6/7.2/4.8/2.4 Kbps Automatic fallback Transmission Speed Approx. 3 seconds/page* at 33.
• • • • Speed dialing One-touch speed dialing (11 destinations) Coded speed dialing (100 destinations) Group dialing (110 destinations) Directory dialing (with Directory key) Regular dialing (with numeric keys) Automatic redialing Manual redialing (with Redial/Pause key) • • • • • • Sequential broadcast (112 destinations) Automatic reception Remote reception by telephone (Default ID: 25) ACTIVITY REPORT (after every 20 transactions) TX (Transmission)/RX (Reception) REPORT TTI (Transmit Terminal Identifi
Index (–), (+) keys, 1-2 Numerics 1-TOUCH LIST description, 6-1 printing, 3-6 sample, 3-6 1-TOUCH SPD DIAL setting, 8-8 A E ECM RX setting, 8-5 ECM TX setting, 8-4 Energy Saver key, 1-2 Error Codes, 7-3 Exposure adjusting, 4-3 key, 1-2 F ACTIVITY REPORT description, 6-1, 8-3, 8-8 printing, 6-2 setting, 6-3 ADD. REGISTRATION settings, 8-8 Alarm indicator, 1-2 ANS.
M Machine settings, 8-1 MAN/AUTO SWITCH setting, 8-6 MANUAL MODE, 5-4 Manual sending, 4-2 MEMORY FULL message, 7-2 Memory sending, 4-1 Menu descriptions, 8-1 key, 1-2 N NOT REGISTERED message, 7-3 Numeric keys, 1-2 O OFFHOOK ALARM setting, 8-2 OK key, 1-2 One-touch speed dialing changing, deleting, 3-2 description, 3-1 keys, 1-1 registering, 3-1 using, 4-4 Overseas number, dialing, 4-8 9 Appendix P Pause key, 1-1 PAUSE TIME setting, 8-4 Pauses, dialing with, 4-8 Problems receiving, 7-8 sending, 7-5 tele
T TEL LINE SETTINGS setting, 8-2 TEL LINE TYPE setting, 8-2 TEL NUMBER MARK setting, 8-2 Telephone line type setting, 2-3 Telephone problems, 7-11 TIME OUT setting, 8-5 Time, entering, 2-2 TONER SUPPLY LOW setting, 8-6 TOUCH TONE setting, 8-2 Troubleshooting, 7-1 TTI POSITION setting, 8-2 TX (Transmission) REPORT description, 6-1, 8-3 setting, 6-3 TX REPORT setting, 8-3 TX SETTINGS settings, 8-4 TX START SPEED setting, 8-2 TX TERMINAL ID setting, 8-2 U UNIT NAME setting, 8-2 UNIT TEL NUMBER setting, 8-2 US
Memo
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON U.S.A., INC. One Canon Plaza, Lake Success, NY 11042, U.S.A. CANON CANADA INC. 6390 Dixie Road Mississauga, Ontario L5T 1P7, Canada CANON EUROPA N.V. Bovenkerkerweg 59-61 P.O. Box 2262, 1180 EG Amstelveen, The Netherlands CANON FRANCE S.A. 17, quai du President Paul Doumer 92414 Courbevoie Cedex, France CANON (U.K.) LTD.
