PCL6 V4 Printer Driver v7.0 User Guide for Windows (pdf)

[Gutter Width]
Species the gutter width.
[Divide into sets for booklet layout]
Creates a booklet in multiple sets. Select whether to automatically or manually divide into sets in [Divide into
Sets]. If dividing manually, specify how many pages are in each set in [Sheets per Set].
[Use creep (displacement) correction]
Corrects displacement between outer and inner pages that occurs during booklet printing. Select a
correction method from [Correction Method]. If correctly manually, specify a correction amount in
[Correction Amount].
[Saddle Press]
Performs saddle press processing when creating a saddle stitched booklet. You can specify the force of
saddle pressing in [Saddle Press Adjustment].
NOTE
● [Main] or [Layout] sheet > [Booklet Printing] cannot be set at the same time as the following settings.
- Settings other than [Covers] sheet > [Congure front cover settings] > [Front Cover] > [Leave blank]
- [Covers] sheet > [Congure back cover settings]
[Page Layout]
Prints with multiple pages arranged on one sheet.
[Staple]
Staples the pages when outputting print data. Select staple position(s).
[On (Eco (Staple-Free))] crimps the paper without using staples.
The available staple positions vary depending on the output paper size, paper feed direction, and paper
source method.
[Color Mode]
Switches between printing in color or in black-and-white.
NOTE
● If you select [Color Mode] > [Color], by default, whether each page is color or grayscale will be determined
and the color mode switched accordingly.
● To print all pages in color, disable [Troubleshooting] > [Auto (color/B&W)] in the [Support/Device] sheet.
[Output Method]
Sets the method for outputting print data. You can set a PIN in the print data or store the print data in the
device.
[Print]
Performs normal printing.
[Hold]
Saves print data in a hold queue (temporary storage area) in the device. You can change the print order or
settings of the stored data from the control panel of the device or the Remote UI.
The le name is displayed in the device. If you select [Document Name] > [Enter name] in the [Settings for
Document to Hold] dialog box displayed by clicking [Settings], you can specify a desired name.
[Secure Print]
Attaches a PIN to print data and save it in the device. This function is useful when printing condential
documents etc. If you enable the Encrypted Secure Print function, you can encrypt and print data and attain a
stronger effect from the aspect of security.
Settings List
119