PCL Driver Guide PCL5c/PCL5e Driver Ver. 6.97 PCL6 Driver Ver. 4.97 Please read this guide before operating this equipment. After you finish reading this guide, store it in a safe place for future reference.
0 Ot¯ PCL Driver Guide
How This Manual Is Organized Chapter 1 Before You Start Chapter 2 Getting Started Chapter 3 Basic Print Options Chapter 4 Special Print Options Chapter 5 Appendix Includes information about additional software used with the PCL5c, PCL5e, or PCL6 printer driver, and the index. Considerable effort has been made to ensure that this manual is free of inaccuracies and omissions. However, as we are constantly improving our products, if you need an exact specification, please contact Canon.
Contents Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ix How to Use This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ix Symbols Used in This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix Keys and Buttons Used in This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix Displays Used in This Manual . . . . . . . . . . . . .
Updating the Alternate Printer Driver (Windows NT 4.0/2000/XP/Server 2003) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-40 Windows NT 4.0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-40 Windows 2000/XP/Server 2003 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-41 Uninstalling the Printer Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Booklet Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-23 Using Creep Correction for Booklet Printing . . . . . . . . . . . . . . . . . . . . . . . . .3-25 Printing with Mixed Paper Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-28 Specifying the Paper Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-31 Printing All the Pages from the Same Paper Source . . . . . . . . . . . . . . . . . .
Selecting an Objective. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-21 Editing the Objective Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-22 Sending Document Data to a User Inbox or Mail Box . . . . . . . . . . . . . . . . . . 4-24 Getting User Inbox or Mail Box Names . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preface Thank you for purchasing this Canon product. Please read this manual thoroughly before operating the product to familiarize yourself with its capabilities, and to make the most of its many functions. After reading this manual, store it in a safe place for future reference. How to Use This Manual Symbols Used in This Manual The following symbols are used in this manual to explain procedures, restrictions, handling precautions, and instructions that should be observed for safety. .
Displays Used in This Manual Screen shots of computer operation screens used in this manual may differ from the ones you actually see, depending on the operating system and the model or options that come with your machine. The keys or buttons which you should click or press are marked with a shown below. , as When multiple keys or buttons can be clicked or pressed, they are highlighted and mentioned in the order in which they should be clicked or pressed.
Abbreviations Used in This Manual In this manual, product names and model names are abbreviated as follows: Microsoft® Windows® 98 operating system: Windows 98 Microsoft® Windows® Millennium Edition operating system: Windows Me Microsoft® Windows NT® 4.0 operating system: Windows NT 4.
Legal Notices Trademarks Canon, the Canon logo, imageRUNNER, imageCLASS, imagePASS, iR, LASER CLASS, and NetSpot are trademarks of Canon Inc. Adobe, PostScript, and PostScript 3 are trademarks of Adobe Systems Incorporated. Citrix, MetaFrame, and MetaFrame XP are trademarks of Citrix Systems, Inc. in the United States and other countries. PCL and HP-GL are trademarks of Hewlett-Packard Company.
Disclaimers The information in this document is subject to change without notice. CANON INC. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, EITHER EXPRESS OR IMPLIED, EXCEPT AS PROVIDED HEREIN, INCLUDING WITHOUT LIMITATION, THEREOF, WARRANTIES AS TO MARKETABILITY, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OF USE OR AGAINST INFRINGEMENT OF ANY PATENT. CANON INC.
xiv
Before You Start 1 CHAPTER This chapter describes the system environments required for using the PCL5c, PCL5e, and PCL6 printer drivers. It also describes where to find help and information regarding the installation and use of these drivers. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Supported Canon Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction 1 Before You Start The Canon PCL5c, PCL5e, and PCL6 printer drivers enable users of Microsoft Windows 98, Windows Me, Windows NT 4.0, Windows 2000, Windows XP, or Windows Server 2003 to print from any Windows application and make full use of their Canon printers. (Although the machines supported by these printer drivers have multiple functions, they will be referred to as "printers" in this guide.
Supported Canon Products The PCL printer driver is available for the following Canon Products. Refer to the following tables to select the driver name that corresponds to your printer. ■ PCL5c printer driver version 6.
■ PCL5e printer driver version 6.
Driver Name imageRUNNER 6020i/5020i Canon iR5020/iR6020 PCL5e imagePASS-M2 (iR6020/5020-M2) Canon iR5020/iR6020-M2 PCL5e imageRUNNER 6570/5570 Canon iR5570/iR6570 PCL5e imagePASS-M3 (iR6570/5570-M3) Canon iR5570/iR6570-M3 PCL5e imageRUNNER 7105/7095/7086 Canon iR7086-7105 PCL5e imagePASS-S1 (iR7105/7095/7086-S1) Canon iR7086-7105-S1 PCL5e imageRUNNER 7200 Canon iR7200 PCL5e imagePASS-M1 (iR7200-M1) Canon iR7200-M1 PCL5e imagePASS-M2 (iR7200-M2) Canon iR7200-M2 PCL5e imageRUNNER 8070 Cano
■ PCL6 printer driver version 4.
Driver Name imageRUNNER 6570/5570 Canon iR5570/iR6570 PCL6 imagePASS-M3 (iR6570/5570-M3) Canon iR5570/iR6570-M3 PCL6 imageRUNNER 7105/7095/7086 Canon iR7086-7105 PCL6 imagePASS-S1 (iR7105/7095/7086-S1) Canon iR7086-7105-S1 PCL6 imageRUNNER 7200 Canon iR7200 PCL6 imagePASS-M1 (iR7200-M1) Canon iR7200-M1 PCL6 imagePASS-M2 (iR7200-M2) Canon iR7200-M2 PCL6 imageRUNNER 8070 Canon iR8070 PCL6 imagePASS-M3 (iR8070-M3) Canon iR8070-M3 PCL6 imageRUNNER 85 Canon iR8500 PCL6 imagePASS-M1 (iR85-M1)
IMPORTANT In this guide, these printer names are hereafter referred to as the following: - imagePASS-C1 (Color iR C2620-C1): Color imageRUNNER C2620-C1 - imagePASS-C1 (Color iR C3200-C1): Color imageRUNNER C3200-C1 - imagePASS-C1 (Color iR C3220-C1): Color imageRUNNER C3220-C1 - imagePASS-C2 (Color iR C2620-C2): Color imageRUNNER C2620-C2 1 Before You Start - imagePASS-C2 (Color iR C3220-C2): Color imageRUNNER C3220-C2 - imagePASS-D1 (iR C5800-D1): imageRUNNER C5800-D1 - imagePASS-D1 (iR C6800-D1): imageR
System Requirements 1 Before You Start The printer drivers can be used in the following system environments: ■ Operating System Software • Microsoft Windows 98 • Microsoft Windows Me • Microsoft Windows NT 4.0 • Microsoft Windows 2000 • Microsoft Windows XP • Microsoft Windows Server 2003 ■ With a Server-Based Computing Environment • Compatible Windows Terminal Server (Service) - Microsoft Windows NT 4.
Where to Find Help 1 Before You Start Here is where to get immediate help if you are having problems installing or using the printer drivers. ■ README.TXT file Any hints, enhancements, limitations, and restrictions you need to be aware of when installing and using your printer drivers are included in the README.TXT file provided with the drivers. The README.TXT file is located in the following folder: \PCL\us_eng.
Getting Started 2 CHAPTER This chapter describes instructions for installing the PCL5c, PCL5e, and PCL6 printer drivers, setting the system configuration, and printing a document. Installing the Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Installing the Printer Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing the Software This section describes instructions for installing the printer driver and the Canon Driver Information Assist Service, and for uninstalling the printer driver. Getting Started 2 Installing the Printer Driver Before using the printer, you must install the PCL5c, PCL5e, or PCL6 printer drivers for it. For color printers, install the PCL5c printer driver, and for black-and-white printers, install either the PCL5e or the PCL6 printer driver.
Standard Installation Standard installation is when you select an existing printer port manually. You can also install a network printer or set up a shared printer by following the procedure below. NOTE If you are using a printer connected to a network using TCP/IP protocol, you can automatically search for a port to install the printer driver. For instructions, see "Dynamic Installation," on p. 2-11. 1 Insert the Printer Driver Software CD-ROM into the CD-ROM drive.
5 In the first dialog box of the PCL Printer Driver Setup Wizard, click [Next]. Getting Started 2 The [License Agreement] dialog box is displayed. 6 7 2-4 Read the license agreement carefully. If you agree to the terms ➞ click [Yes]. Select [Manually Set Port to Install] ➞ click [Next].
NOTE If you have installed Canon Driver Information Assist Service and are using an operating system equipped with Windows Firewall, when the following message box is displayed, click [Yes] or [No]. - If you select [Yes], Windows Firewall will be configured to unblock the connection for Canon Driver Information Assist Service, so that you can set up the printer configuration automatically or use the Job Accounting feature. - If you select [No], you cannot use Canon Driver Information Assist Service.
If the required drivers have already been installed using the installer, the following screen is displayed. Select an option under [Process to Install Printer Driver] ➞ click [Next]. Getting Started 2 [Process to Install Printer Driver] - [Add Printers and Update Existing Drivers]: You can install a new driver and update existing drivers simultaneously. - [Add Printers]: You can add a new driver without affecting existing drivers.
9 Select the printer driver(s) you want to install from [Printer List] ➞ click [Add]. The printer driver(s) you selected is added to [Printer List for Driver Installation]. Installing the Software 2-7 2 Getting Started NOTE • If you are using a shared printer in the Print Server (Point and Print) environment, it is necessary to install the Canon Driver Information Assist Service in the server PC in order to set up the printer configuration automatically or to use the Job Accounting feature.
NOTE • You can also add a printer driver to [Printer List for Driver Installation] by double-clicking the printer driver under [Printer List]. • To delete a printer driver that you do not want to install from [Printer List for Driver Installation], select the appropriate printer driver ➞ click [Remove]. 10 Getting Started 2 Check that the printer driver(s) you want to install is selected in [Printer List for Driver Installation] ➞ click [Next].
11 Select a port. Getting Started 2 NOTE If more than one printer driver is selected, this dialog box will reappear to enable selection of different ports for other printer drivers. ● If you want to set a standard port: ❑ Select the printer port you want to use from [Port]. ● If you want to set a port for a network printer: ❑ Click [Add Port]. ❑ Select [Network] from [Add Port] dialog box ➞ click [OK]. ❑ Select the network printer ➞ click [OK].
● If you want to add a port: ❑ Click [Add Port]. ❑ Select the printer port you want to add from [Add Port] dialog box ➞ click [OK]. Getting Started 2 Ports displayed in the [Add Port] dialog box vary depending on the operating system you are using. ❑ Specify the settings for the port you want to add in the dialog box displayed ➞ click [OK]. The dialog box that is displayed varies according to the port being added.
NOTE • If you want to specify shared printer settings, or are installing an alternate driver in Windows NT 4.0/2000/XP/Server 2003, select [Use as Shared Printer]. For instructions on how to specify detailed settings for a shared printer, see steps 2 to 4 of "Alternate Printer Driver (Windows NT 4.0/2000/XP/Server 2003)," on p. 2-18. • If you have selected [Network] in the [Add Port] dialog box, you cannot set [Printer Name] and [Use as Shared Printer]. Verify the installation settings ➞ click [Start].
1 Getting Started 2 Insert the Printer Driver Software CD-ROM into the CD-ROM drive. 2 Double-click the [My Computer] icon ➞ the CD-ROM drive icon. 3 Double-click the following folders: [PCL] ➞ [us_eng]. 4 5 Double-click the [Setup.exe] icon to start the installation process. In the first dialog box of the PCL Printer Driver Setup Wizard, click [Next]. The [License Agreement] dialog box is displayed. 6 2-12 Read the license agreement carefully. If you agree to the terms ➞ click [Yes].
Select [Search for Network Printers to Install] ➞ click [Next]. 2 Getting Started 7 NOTE • To search for printers in sleep mode on the network, select [Reactivate Printers in the Sleep Mode and Search]. • If you have installed Canon Driver Information Assist Service and are using an operating system equipped with Windows Firewall, when the following message box is displayed, click [Yes] or [No].
8 Select [PCL5e/5c Printer Driver] or [PCL6 Printer Driver] ➞ click [Next]. Getting Started 2 NOTE Depending on the printer you are using, this dialog box is not displayed. In this case, proceed to step 9. 9 2-14 Click [Next].
If the required drivers have already been installed using the installer, the following screen is displayed. Select an option under [Process to Install Printer Driver] ➞ click [Next]. Getting Started 2 [Process to Install Printer Driver] - [Add Printers and Update Existing Drivers]: You can install a new driver and update existing drivers simultaneously. - [Add Printers]: You can add a new driver without affecting existing drivers.
10 Select the printer driver(s) you want to install from [Printer List] ➞ click [Add]. Getting Started 2 If you want to select all the printer drivers found, click [Select All]. The printer driver(s) you selected is added to [Printer List for Driver Installation]. NOTE • You can also add a printer driver to [Printer List for Driver Installation] by double-clicking the printer driver under [Printer List].
12 If you want to change the printer name, or set the printer as the default printer, select [Set Printer Information] ➞ click [Next]. Getting Started 2 If you do not want to change these settings, click [Next] ➞ skip to step 14. 13 Enter a printer name in [Printer Name], or select [Set as Default] ➞ click [Next].
NOTE If you want to specify shared printer settings, or are installing an alternate driver in Windows NT 4.0/2000/XP/Server 2003, select [Use as Shared Printer]. For instructions on how to specify detailed settings for a shared printer, see steps 2 to 4 of "Alternate Printer Driver (Windows NT 4.0/2000/XP/Server 2003)," on p. 2-18. 14 Verify the installation settings ➞ click [Start]. Getting Started 2 The information shown in the window may differ according to your system parameters.
2 Select [Use as Shared Printer] ➞ enter a share name. Getting Started 2 If you want to set the operating system on which the driver will run, click [Drivers to Add]. 3 Select the operating system from [Drivers to Add].
4 In the [Printer Information] dialog box, click [Next]. Getting Started 2 5 Follow the instructions in the dialog or message boxes to complete the installation. See steps 13 and 14 of "Standard Installation," on p. 2-3. IMPORTANT To use the printer driver on the client PC, double-click the shared printer icon for the alternate printer driver on the server PC.
Using the Add Printer Wizard To install a printer driver from the [Printers] folder in the Windows Control Panel, follow the procedure below. On the [Start] menu, point to [Settings] ➞ click [Printers]. NOTE • If you are using Windows XP Professional/Server 2003, on the [Start] menu, click [Printers and Faxes]. • If you are using Windows XP Home Edition, on the [Start] menu, click [Control Panel] ➞ [Printers and Other Hardware] ➞ [Printers and Faxes].
4 Click [Browse] to select the folder of the driver you want to install ➞ click [OK]. Getting Started 2 You can select the driver from the following folders on the CD-ROM: • PCL5c/PCL5e OS Path Windows 98/Me: \PCL\us_eng\win98_me\pcl5e_5c Windows NT 4.0: \PCL\us_eng\winnt40\pcl5e_5c Windows 2000/XP/Server 2003: \PCL\us_eng\win2k_xp\pcl5e_5c • PCL6 OS 2-22 Path Windows 98/Me: \PCL\us_eng\win98_me\pcl6 Windows NT 4.
5 Select your printer model from [Printers] ➞ click [Next]. Getting Started 2 6 Follow the instructions on the screen to continue ➞ click [Finish] to start copying the files. The printer icon is displayed in the [Printers] folder. The driver is now installed.
USB Connection Installation (Windows 98/Me/2000/XP/ Server 2003) To install the printer driver through a USB connection, follow the procedure below.
2 Select [Install with USB Connection] ➞ click [Next]. Getting Started 2 3 Select either [PCL5e/5c Printer Driver] or [PCL6 Printer Driver] ➞ click [Next]. NOTE Depending on the printer you are using, this dialog box is not displayed. In this case, proceed to step 4. 4 Click [Yes] in the message box to proceed. File copying starts.
5 When the message box below appears after the files are copied, connect the USB cable, and then turn the printer ON. Getting Started 2 NOTE If you are using Windows XP, select [Install Software Automatically (Recommended)] in the dialog box displayed next ➞ click [Next]. 6 Click [Exit] to finish the installation. The printer icon is displayed in the [Printers] folder. The driver is now installed.
4 Select [Search for the best driver for your device. (Recommended)] ➞ click [Next]. Getting Started 2 5 Select [Specify a location] ➞ click [Browse] to select [\PCL\us_eng\usbport\win98] on the CD-ROM ➞ click [Next]. 6 Follow the instructions on the screen ➞ click [Finish] after the files are copied. The USB driver is now installed. Continue with the installation to install the printer driver. 7 Follow the instructions on the screen ➞ select [Search for the best driver for your device.
8 Select [Specify a location] ➞ click [Browse] to select the folder containing the driver you want to install ➞ click [Next]. You can select the driver from the following folders on the CD-ROM: PCL5c/PCL5e: \PCL\us_eng\win98_me\pcl5e_5c PCL6: 2 Getting Started 9 \PCL\us_eng\win98_me\pcl6 Follow the instructions on the screen ➞ click [Finish] after the files are copied. The printer driver is now installed.
4 Select the [PCLUSBME.INF] file in the [Select Other Driver] dialog box ➞ click [OK]. Getting Started 2 5 Follow the instructions on the screen ➞ click [Finish] after the files are copied. The USB driver is now installed. Continue with the installation to install the printer driver. 6 In the [Select Other Driver] dialog box, select the folder containing the driver you want to install ➞ click [OK].
Plug and Play Installation (Windows 2000) 1 2 2 Connect the cable from the printer's USB port to the PC's USB port, and then turn the printer ON. Start Windows, and then insert the Printer Driver Software CD-ROM into the CD-ROM drive. Getting Started The Found New Hardware Wizard starts. 3 4 2-30 In the first dialog box of the Found New Hardware Wizard, click [Next]. Select [Search for a suitable driver for my device (recommended)] ➞ click [Next].
5 Select [Specify a location] ➞ click [Next]. Getting Started 2 6 Click [Browse] to select the folder containing the driver you want to install ➞ click [OK]. You can select the driver from the following folders on the CD-ROM: PCL5c/PCL5e: \PCL\us_eng\win2k_xp\pcl5e_5c PCL6: 7 \PCL\us_eng\win2k_xp\pcl6 Follow the instructions on the screen ➞ click [Finish] after the files are copied. The USB driver and the printer driver are now installed.
Plug and Play Installation (Windows XP/Server 2003) 1 2 2 Connect the cable from the printer's USB port to the PC's USB port, and then turn the printer ON. Start Windows, and then insert the Printer Driver Software CD-ROM into the CD-ROM drive. Getting Started The Found New Hardware Wizard starts. 3 Confirm that [Install the software automatically (Recommended)] is selected ➞ click [Next]. Windows searches for the driver automatically, and then starts the installation.
Installing the Canon Driver Information Assist Service After installing the printer driver, you can set up the printer configuration automatically and use the Job Accounting feature. If you are using a shared printer in the Print Server (Point and Print) environment, it is necessary to install the Canon Driver Information Assist Service in the server PC. 1 Insert the Printer Driver Software CD-ROM into the CD-ROM drive. 2 Double-click the [My Computer] icon ➞ the CD-ROM drive icon.
6 Read the license agreement carefully. If you agree to the terms ➞ click [Yes]. 7 Select [Manually Set Port to Install] ➞ click [Next]. 8 Select [Canon Driver Information Assist Service] ➞ click [Next].
NOTE If you are using an operating system equipped with Windows Firewall, when the following message box is displayed, click [Yes] or [No]. - If you select [Yes], Windows Firewall will be configured to unblock the connection for Canon Driver Information Assist Service, so that you can set up the printer configuration automatically or use the Job Accounting feature. - If you select [No], you cannot use Canon Driver Information Assist Service.
2 Select [PCL Printer Driver] ➞ select [Update Existing Drivers] ➞ click [Next]. 3 Verify the installation settings ➞ click [Start]. 4 After the files are copied, click [Exit] to finish the installation. Getting Started 2 Restart your computer when a message is displayed prompting you to do so. The printer drivers already installed are now updated.
IMPORTANT To use the updated alternate printer driver on the client PC, first uninstall the current printer driver ➞ double-click the shared printer icon for the updated alternate printer driver on the server PC. Using the Add Printer Wizard 2 Insert the Printer Driver Software CD-ROM into the CD-ROM drive. On the [Start] menu, point to [Settings] ➞ click [Printers]. NOTE • If you are using Windows XP Professional/Server 2003, on the [Start] menu, click [Printers and Faxes].
5 Click [New Driver] ➞ follow the instructions on the screen. Getting Started 2 NOTE For Windows NT 4.0, take note of the printer name displayed for [Driver]. 6 Click [Have Disk] to specify the driver path on the CD-ROM ➞ follow the instructions on the screen. For Windows NT 4.0, proceed to step 7. For Windows 98/Me/2000/XP/Server 2003, skip to step 8. For Windows 98/Me/2000/XP/Server 2003, the printer driver is updated.
7 If a dialog box appears asking whether you want to replace the existing driver, select [Replace existing driver] ➞ click [OK]. Getting Started 2 The printer driver is updated. NOTE Check if the printer name has been changed. If so, rename the printer with its original name, which you have taken note of in step 5. For example, you may see the printer name being changed in the following way: from "Canon iR C3200 PCL5e" to "Canon iR C3200 PCL5e (Copy 2).
Updating the Alternate Printer Driver (Windows NT 4.0/ 2000/XP/Server 2003) If you use a shared printer on a network, and an alternate printer driver is installed on the server, the alternate printer driver is updated simultaneously when you install a new driver with the Installer. To update the alternate printer driver manually without using the Installer, follow the procedure below. 2 Getting Started Windows NT 4.0 1 2 3 4 2-40 On the [Start] menu, point to [Settings] ➞ click [Printers].
6 When a message appears prompting you to insert the CD-ROM, insert the Printer Driver Software CD-ROM into the CD-ROM drive ➞ click [OK]. Click [Browse] to specify the driver path on the CD-ROM ➞ click [OK]. The alternate printer driver is updated. 2 IMPORTANT To use the updated printer driver on the client PC, first uninstall the current printer driver ➞ double-click the shared printer icon for the updated alternate printer driver on the server PC.
3 Select the alternate printer driver you want to update ➞ click [Update] (Windows 2000), [Replace] (Windows XP), or [Reinstall] (Windows Server 2003). Getting Started 2 4 5 When a message appears prompting you to insert the CD-ROM, insert the Printer Driver Software CD-ROM into the CD-ROM drive ➞ click [OK]. Click [Browse] to specify the driver path on the CD-ROM ➞ click [OK]. The alternate printer driver is updated.
Uninstalling the Printer Driver It is recommended that you use the Uninstaller to uninstall an unnecessary driver. 2 On the [Start] menu, point to [Programs] ➞ [Canon Printer Uninstaller] ➞ click [PCL Printer Driver Uninstaller]. 2 In the [Delete Printer] dialog box, select the printer driver you want to delete. 3 Click [Delete]. 4 Click [Yes] to confirm the deletion.
5 Click [Exit] in the [Delete Printer] dialog box. Getting Started 2 NOTE You can also start the Uninstaller from the Printer Driver Software CD-ROM. To do so, double-click the [Uninstal.exe] icon in the following folder: \PCL\us_eng\misc.
Setting Up the Printer Configuration The printer configuration can be set up automatically while installing the driver, depending on the port selected for the machine. If the machine cannot be configured during the installation, follow the procedure below. There are two methods for setting up the printer configuration: automatic and manual.
1 On the [Start] menu, point to [Settings] ➞ click [Printers]. NOTE • If you are using Windows XP Professional/Server 2003, on the [Start] menu, click [Printers and Faxes]. • If you are using Windows XP Home Edition, on the [Start] menu, click [Control Panel] ➞ [Printers and Other Hardware] ➞ [Printers and Faxes]. 2 Getting Started 2 2-46 In the [Printers] folder, right-click the printer icon for your printer ➞ click [Properties].
3 In the printer properties dialog box, click the [Configuration] tab (Windows 98/Me) or [Device Settings] tab (Windows NT 4.0/2000/XP/Server 2003). The [Configuration] sheet (Windows 98/Me) or [Device Settings] sheet (Windows NT 4.0/2000/XP/Server 2003) is displayed. Getting Started 2 4 Click [Get Device Status]. The detected information is displayed in the [Configuration] sheet (Windows 98/ Me) or [Device Settings] sheet (Windows NT 4.0/2000/XP/Server 2003). 5 Click [Yes] in the message box.
Configuring Manually If you cannot set up the configuration automatically, specify the options manually in the [Configuration] sheet (Windows 98/Me) or [Device Settings] sheet (Windows NT 4.0/2000/XP/Server 2003). 1 2 On the [Start] menu, point to [Settings] ➞ click [Printers]. Getting Started NOTE • If you are using Windows XP Professional/Server 2003, on the [Start] menu, click [Printers and Faxes].
3 In the printer properties dialog box, click the [Configuration] tab (Windows 98/Me) or [Device Settings] tab (Windows NT 4.0/2000/XP/Server 2003). The [Configuration] sheet (Windows 98/Me) or [Device Settings] sheet (Windows NT 4.0/2000/XP/Server 2003) is displayed. Getting Started 2 4 5 Specify the paper source, output, and other options installed in the printer manually. Click [OK].
Configuring the Device Function Settings If you cannot set up the printer configuration automatically (see "Setting Up the Printer Configuration," on p. 2-45), you need to specify the device functions manually.
3 On the [Start] menu, point to [Settings] ➞ click [Printers]. NOTE • If you are using Windows XP Professional/Server 2003, on the [Start] menu, click [Printers and Faxes]. • If you are using Windows XP Home Edition, on the [Start] menu, click [Control Panel] ➞ [Printers and Other Hardware] ➞ [Printers and Faxes]. 5 6 2 In the [Printers] folder, right-click the printer icon for your printer ➞ click [Properties].
8 Select the functions you want to use. Getting Started 2 NOTE Depending on the corresponding function settings and controller version of your printer, some functions may not be available. 9 Click [OK]. The [Device Function Settings] dialog box closes. 10 Click [OK]. The functions you selected in step 8 become available in the printer properties dialog box.
Configuring the Device Functions NOTE For the imageRUNNER 105+ -M3, imageRUNNER 8070-M3, imageRUNNER 85+ -M3, and imageRUNNER 9070-M3, you can enable the device functions manually, according to your needs. To perform this operation, the corresponding function settings must be enabled on the printer. 1 On the [Start] menu, point to [Settings] ➞ click [Printers]. NOTE • If you are using Windows XP Professional/Server 2003, on the [Start] menu, click [Printers and Faxes].
7 Click [OK]. The functions you selected in step 5 become available in the printer properties dialog box.
Printing a Document To print a document, follow the procedure below. 2 2 In the application software, with the document open, select [Print] to print your document. In the [Print] dialog box, select your printer from [Name] ➞ click [Properties]. The printer properties dialog box opens. 3 Specify the various print settings in the printer properties dialog box. To switch between sheets, click the tabs for the [Page Setup], [Finishing], [Paper Source], and [Quality] sheets.
Getting Started 2 2-56 Printing a Document
Basic Print Options 3 CHAPTER This chapter describes instructions for specifying the various basic settings for printing a document. Note that, depending on your printer model, some print options may be unavailable. Accessing the Printer Properties Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3 Windows 98/Me . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-3 Windows NT 4.0/2000/XP/Server 2003 .
3. Basic Print Options Creating Tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-50 Printing on Custom Paper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-53 Registering Custom Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-53 Printing on Custom Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Accessing the Printer Properties Dialog Box The printer properties dialog box of the printer driver contains many settings that enable you to set up and control your printer. The available settings vary depending on how you access the printer properties dialog box. To access the printer properties dialog box, follow the procedure below for your version of Windows. If you access the printer properties dialog box from application software, the specified settings are available for the current print job.
2 Select your printer name from the drop-down list box ➞ click [Properties]. Basic Print Options 3 Accessing the Printer Properties Dialog Box from the Printers Folder 1 2 3-4 On the [Start] menu, point to [Settings] ➞ click [Printers]. In the [Printers] folder, right-click the printer icon for your printer ➞ click [Properties].
Windows NT 4.0/2000/XP/Server 2003 You can access the printer properties dialog box and the printing preferences dialog box in Windows NT 4.0/2000/XP/Server 2003. In the printer properties dialog box and the printing preferences dialog box, you can specify the printer driver settings and set up the printer configuration. NOTE If you are using Windows NT 4.0, the "printing preferences" dialog box refers to the "document defaults" dialog box.
Accessing the Printing Preferences Dialog Box from the Printers Folder If you access the printing preferences dialog box from the [Printers] folder, you can specify the default printer driver settings for every print job. NOTE To access the printing preferences dialog box from the [Printers] folder, you need to be assigned Full Control Permission for the printer. 1 Basic Print Options 3 On the [Start] menu, point to [Settings] ➞ click [Printers].
Accessing the Printer Properties Dialog Box from the Printers Folder You can set up the printer configuration in the printer properties dialog box. There are additional options (reflected in additional tabs/sheets) if you are accessing the printer properties dialog box from the [Printers] folder. This method should be used when setting the configuration for the first time. On the [Start] menu, point to [Settings] ➞ click [Printers].
Using Profiles for Printing This section describes what a profile is, how to select a profile, and how to add or edit profiles. What Is a Profile? Basic Print Options 3 Various printer driver settings are saved as profiles. You can also save printer driver settings that you frequently use as profiles. If you select a profile, the document is printed with the saved settings. Selecting a Profile for Printing If you select a profile, the document is printed with the settings of the selected profile.
Adding or Editing Profiles You can add your own profiles, or edit the names, icons, or comments of the customized profiles. To add or edit profiles, follow the procedure below. NOTE For Windows NT 4.0/2000/XP/Server 2003, this option is available if [Allow Setting Edition] is selected in the [Profile] sheet in the printer properties dialog box.
Adding or Editing Profiles in the Profile Sheet (Windows NT 4.0/2000/XP/Server 2003) Profiles specified in the printer properties dialog box that is opened from the [Printers] folder can be accessed and used by all the clients connected to the server. 1 3 On the [Start] menu, point to [Settings] ➞ click [Printers]. Basic Print Options NOTE • If you are using Windows XP Professional/Server 2003, on the [Start] menu, click [Printers and Faxes].
In the printer properties dialog box, click the [Profile] tab. The [Profile] sheet is displayed.
4 Click [Add] or [Edit]. The [Add/Edit Profile] dialog box opens. Basic Print Options 3 5 6 7 3-12 Specify the settings for the profile in the [Page Setup], [Finishing], [Paper Source], and [Quality] sheets. Display the [Attribution] sheet. Specify the name, icon, and a comment of the profile ➞ click [OK].
Scaling a Document There are two methods for scaling a document: select the output size of the document to scale it automatically, or specify the scaling value manually. Scaling a Document Automatically 1 2 Basic Print Options 3 From the printer properties dialog box, display the [Page Setup] sheet. Select the page size from [Page Size].
4 Click [OK]. The scaling is set automatically according to the sizes specified in [Page Size] and [Output Size]. NOTE If the value is less than 25% or more than 400%, the document is printed without scaling on the paper specified in [Output Size]. Scaling a Document Manually 3 Basic Print Options 1 2 From the printer properties dialog box, display the [Page Setup] sheet. Select the page size from [Page Size].
5 Select [Manual Scaling] ➞ specify the desired scaling value from 25% to 400%. Click [OK].
Printing Multiple Pages on One Sheet Multiple pages can be printed on one sheet of paper. The number of document pages which can be printed on one sheet of paper is 2, 4, 6, 8, 9, or 16. 1 From the printer properties dialog box, display the [Page Setup] sheet. Basic Print Options 3 2 3-16 Select the required page layout from [Page Layout].
3 Select the required page order layout from [Page Order]. Basic Print Options 3 4 Click [OK].
Two-Sided Printing Two-sided printing prints a document on both sides of the paper. NOTE • Two-sided printing is not available for the imageRUNNER 2000/1600, imageRUNNER 2010F, imageCLASS 2300, and LBP-2000. • For the Color imageRUNNER C2000 series, imageRUNNER 2016, imageRUNNER 2020, and MF7280, two-sided printing is available only when a Duplexing Unit or a Duplex Unit is attached to the printer. Basic Print Options 3 1 2 3-18 From the printer properties dialog box, click the [Finishing] tab.
3 Select the required binding edge for the paper printout from [Binding Location]. If the [Binding Location] option is selected, the document and margins are positioned correctly on the pages for two-sided printing. 4 If you want to set the gutter width, click [Gutter] to open the [Gutter Settings] dialog box ➞ specify the value in [Gutter] ➞ click [OK]. Basic Print Options 3 If you do not set the gutter width, proceed to step 5. 5 Click [OK] in the [Finishing] sheet.
Specifying the Finishing Options This section describes how to select a finishing option and how to use Booklet Printing. Selecting a Finishing Option 3 Basic Print Options The various options in the [Finishing] sheet enable you to select the most appropriate tray output method for each document. Selecting the Output Option The available output options are: Collate Outputs sorted copies of the document in correct binding order into the output tray.
1 From the printer properties dialog box, display the [Page Setup] sheet. Basic Print Options 3 2 Specify the number of copies to print in [Copies].
3 Click the [Finishing] tab. Basic Print Options 3 4 5 Select a finishing option, such as [Collate], [Group], [Staple & Collate], or [Staple & Group], under [Finishing]. If you selected [Staple & Collate] or [Staple & Group], click [Staple Position] ➞ specify the position to staple in the [Staple Position] dialog box ➞ click [OK]. If you did not select [Staple & Collect] or [Staple & Group], proceed to step 6. NOTE Depending on the printer you are using, the staple position cannot be specified.
6 Select [Rotate] if you want to output copies of a document turned at a 90 degree angle for each copy. If you do not use this option, proceed to step 7. NOTE • Rotate is available only if a finisher or a saddle finisher is not attached to the printer. • For the imageRUNNER 400/330 and imageRUNNER 400/330-P1/R1, Rotate is available even if a finisher is attached to the printer. 3 Click [OK] in the [Finishing] sheet.
1 From the printer properties dialog box, click the [Finishing] tab. Basic Print Options 3 2 Select [Booklet Printing] from [Print Style]. 3 Select [Saddle Stitch] if you want to saddle stitch the booklet. If you do not use this option, proceed to step 4. NOTE • Saddle stitching is the process of folding several sheets in half and stapling them at the spine to form a multipaged booklet or publication. • Saddle stitch printing is available only if a saddle finisher is attached to the printer.
4 If you are using Windows 98/Me/2000/XP/Server 2003, click [Booklet]. The [Detailed Settings for Booklet] dialog box opens. 5 Specify the detailed settings ➞ click [OK]. 6 Click [OK] in the [Finishing] sheet. Basic Print Options 3 NOTE If you are using Windows 98/Me/2000/XP/Server 2003, you can use different paper for the cover page of the booklet.
1 From the printer properties dialog box, click the [Finishing] tab. Basic Print Options 3 2 3-26 Select [Booklet Printing] from [Print Style].
3 Click [Booklet]. The [Detailed Settings for Booklet] dialog box opens. Basic Print Options 3 4 5 6 If you are using Windows 98/Me/2000/XP/Server 2003, select [In Device] for [Booklet Printing Process]. Select [Use Creep (Displacement) Correction] ➞ set how the printing position shift amount is to be adjusted under [Displacement Correction Method] ➞ click [OK]. Click [OK] in the [Finishing] sheet.
Printing with Mixed Paper Sizes You can print a document correctly oriented for stapling consisting of mixed paper sizes, such as A4 and A3, or Letter and 11x17. NOTE Printing with mixed paper sizes is not available for the Color imageRUNNER C2000 series, imageRUNNER 2000/1600, imageRUNNER 2010F, imageRUNNER 400/330, imageRUNNER 400/330-P1/R1, imageRUNNER 600/550/60, imageCLASS 2300, LASER CLASS 700 series, and LBP-2000.
3 Click the [Finishing] tab ➞ select [Print with Mixed Paper Sizes/Orientations]. Basic Print Options 3 4 Click [Details]. The [Detailed Settings] dialog box opens.
5 Select the combination of mixed paper sizes from [Mixed Paper Sizes]. A list of paper size combinations based on the paper size specified in [Page Size] in the [Page Setup] sheet is displayed in the drop-down list box. 6 Basic Print Options 3 Select the pattern of the print orientation and binding location for the combined paper sizes under [Paper Alignment]. 7 Specify the gutter width in [Gutter]. 8 Click [OK]. The [Detailed Settings] dialog box closes.
Specifying the Paper Source The [Paper Source] sheet enables you to specify the settings for the paper source. The type of paper and loading method can be set under [Paper Selection]. Use the Paper Selection setting to specify whether to print all the pages from one paper source or to print the pages from different paper sources.
Printing All the Pages from the Same Paper Source 1 From the printer properties dialog box, click the [Paper Source] tab. 2 Select [Same Paper for All Pages] from [Paper Selection]. 3 Select the paper source required from [Paper Source]. 4 Click [OK].
Printing the First, Body, and Last Pages from Different Paper Sources 1 2 From the printer properties dialog box, click the [Paper Source] tab. Select [Different for First, Others, and Last] from [Paper Selection]. Basic Print Options 3 3 4 Select the paper sources required for the first, body, and last pages from [First Page], [Other Pages], and [Last Page]. Click [OK].
Printing the First, Second, Body, and Last Pages from Different Paper Sources 1 2 From the printer properties dialog box, click the [Paper Source] tab. Select [Different for First, Second, Others, and Last] from [Paper Selection]. Basic Print Options 3 3 4 3-34 Select the paper sources required for the first, second, body, and last pages from [First Page], [Second Page], [Other Pages], and [Last Page]. Click [OK].
Printing the Cover and Body Pages of a Booklet from Different Paper Sources (Windows 98/Me/2000/XP/Server 2003) 2 From the printer properties dialog box, click the [Finishing] tab. Select [Booklet Printing] from [Print Style].
3 Click the [Paper Source] tab ➞ select [Different for Cover and Others] from [Paper Selection]. Basic Print Options 3 4 5 3-36 Select the paper sources required for the cover and body pages from [Cover Page] and [Other Pages]. Click [OK].
Printing on Transparencies NOTE This option is not available for the imageRUNNER 2016, imageRUNNER 2020, and MF7280. 2 3 4 5 From the printer properties dialog box, click the [Paper Source] tab. 3 Select [Transparency Interleaving] from [Paper Selection]. Basic Print Options 1 Select the paper source required for the transparencies and interleaf sheets from [Transparencies] and [Interleaf Sheets].
Using Cover or Sheet Insertion Options You can add front and back covers, sheet insertions, or chapter pages to the document using a paper source different from that used for body pages. You can also insert tab paper into the document. NOTE To use these options, you need to specify the printer controller version. (See "Configuring the Device Function Settings," on p. 2-50.
Specify the paper source or paper type for the body pages of the document. ● If you want to use the same type of paper for all body pages: ❑ Select [Same Paper for All Pages] from [Paper Selection]. ❑ Select the paper source from [Paper Source] or [Paper Type].
● If you want to insert sheets into body pages for separation: ❑ Select [Inserting Sheet] from [Paper Selection]. ❑ Select the paper source from [Original Paper Source] or [Original Paper Type]. Basic Print Options 3 3 Click [Front/Back Cover Settings]. The [Front/Back Cover Settings] dialog box opens. 4 Select [Set Front Cover] and [Set Back Cover] to add front and back covers. You can select either or both.
5 6 7 Select the side of paper to print on from [Print on]. Select the paper source for front and back covers from [Paper Source]. Click [OK]. The [Front/Back Cover Settings] dialog box closes. 3 Click [OK].
Inserting Sheets into the Document (Windows 98/Me/ 2000/XP/Server 2003) You can insert blank sheets into documents for clearer distinction among sections, or insert sheets to use as chapter pages, which are useful to separate the document into chapters. You can also print on the inserted sheets. NOTE • Depending on the controller version of the printer you are using, this option may not be available.
2 Select [Inserting Sheet] from [Paper Selection]. Basic Print Options 3 3 Select the paper source or paper type for the body pages of the document from [Original Paper Source] or [Original Paper Type].
4 Click [Inserting Sheet Settings]. The [Inserting Sheet Settings] dialog box opens. Basic Print Options 3 5 6 Select either [Inserted Sheet] or [Chapter Page] for [Sheet for Insertion] to specify the type of inserted sheets. Select the side of paper to print on from [Print on]. NOTE Chapter pages can be printed only on the front side of the page. Blank sheets cannot be inserted as chapter pages. 7 8 3-44 Select the paper source for inserted sheets or chapter pages from [Paper Source].
9 In the same way, specify the settings for subsequent inserted sheets or chapter pages. NOTE • If the sequence number of the inserted sheets or chapter pages differs from that of the insertion positions, an ascending sequence is applied after clicking [Done]. • The available range for the insertion position is from pages 2 to 999. Click [OK]. The [Inserting Sheet Settings] dialog box closes. 11 3 Click [OK].
Inserting Tab Paper (Windows 98/Me/2000/XP/Server 2003) You can print on the tab part of tab paper. You can also insert tab paper into a document.
2 Select [Inserting Sheet] from [Paper Selection]. Basic Print Options 3 3 Select the paper source or paper type for the body pages of the document from [Original Paper Source] or [Original Paper Type].
4 Click [Inserting Sheet Settings]. The [Inserting Sheet Settings] dialog box opens. Basic Print Options 3 5 Select [Tab Paper] from [Sheet for Insertion]. NOTE For the imageRUNNER C5800, imageRUNNER C5800-D1, imageRUNNER C5870, imageRUNNER C5870-G1, imageRUNNER C6800, imageRUNNER C6800-D1, imageRUNNER C6870, and imageRUNNER C6870-G1, also select the type of tab paper from the list box to the right of [Sheet for Insertion]. 6 7 3-48 Select the paper source for the tab paper from [Paper Source].
8 In the same way, specify the settings for subsequent tab paper sheets. NOTE • If the sequence number of the tab paper differs from that of the insertion positions, ascending sequence is applied after clicking [Done]. • The available range for the insertion position is from pages 1 to 999. 9 Specify the width to shift the image to be printed on the tab part of the paper in [Shifting Width]. 3 10 Basic Print Options NOTE You can change the unit used to specify the shift width (millimeters or inches).
Creating Tabs NOTE • This option is available for the Color imageRUNNER C2620, Color imageRUNNER C2620-C1, Color imageRUNNER C2620-C2, Color imageRUNNER C3200, Color imageRUNNER C3200-C1, Color imageRUNNER C3220, Color imageRUNNER C3220-C1, Color imageRUNNER C3220-C2, imageRUNNER C5800, imageRUNNER C5800-D1, imageRUNNER C5870, imageRUNNER C5870-G1, imageRUNNER C6800, imageRUNNER C6800-D1, imageRUNNER C6870, imageRUNNER C6870-G1, imageRUNNER 105, imageRUNNER 105-M1, imageRUNNER 105-M2, imageRUNNER 105+, imag
2 Select [Paper Type] from [Select by] ➞ select [Tab Paper] from [Paper Type]. Basic Print Options 3 3 Click [Tab Position]. The [Tab Position Settings] dialog box opens. 4 Specify the width to shift the image to be printed on the tab part of the paper in [Shifting Width]. NOTE You can change the unit used to specify the shift width (millimeters or inches).
5 Click [OK]. The [Tab Position Settings] dialog box closes. 6 Click [OK].
Printing on Custom Paper This section describes how to print on nonstandard paper. If you register a paper size as a custom paper size, you will be able to select the registered custom paper size from [Page Size] or [Output Size] in the [Page Setup] sheet when printing a document. Registering Custom Paper 1 On the [Start] menu, point to [Settings] ➞ click [Printers]. NOTE • If you are using Windows XP Professional/Server 2003, on the [Start] menu, click [Printers and Faxes].
3 In the printer properties dialog box, click the [Page Setup] tab ➞ click [Custom Paper Size]. Basic Print Options 3 4 5 Enter a custom paper name in [Name of Custom Paper Size]. Select the unit of measurement to specify the paper size for [Unit] ➞ specify the height and width for [Height] and [Width]. NOTE Enter the values for the height and width of the paper size in portrait orientation, where the height should be longer than the width.
6 7 Click [Register] ➞ click [OK] in the [Custom Paper Size Settings] dialog box. Click [OK] in the printer properties dialog box. NOTE • For Windows NT 4.0/2000/XP/Server 2003, the custom paper sizes can be used with all printers installed on the computer you are using. • For Windows 98/Me, you can register a maximum of 50 custom paper sizes. 1 2 3 From the printer properties dialog box, click the [Page Setup] tab. Select the custom paper name you specified from [Page Size] and [Output Size].
Printing on Local Standard Paper You can use local standard paper, such as oficio or government letter paper, to print documents. In order to print on local standard paper, you need to specify the paper source for local standard paper in advance. Also, you need to register the local standard paper as custom paper. (See "Registering Custom Paper," on p. 3-53, and "Printing on Custom Paper," on p. 3-55.
In the printer properties dialog box, click the [Configuration] tab (Windows 98/Me) or [Device Settings] tab (Windows NT 4.0/2000/XP/Server 2003) ➞ [Form to Tray Assignment].
4 From [Paper Source Information], select the paper source in which the local standard paper is loaded ➞ select [Local Standard] from [Paper Size]. Basic Print Options 3 3-58 5 Click [OK] in the [Form to Tray Assignment] dialog box. 6 Click [OK] in the printer properties dialog box.
Printing a Banner Page with a Print Job (Windows 98/Me/ 2000/XP/Server 2003) You can add a banner page to your document when it is printed. The banner page shows the user's login name, the time at which the job was printed, and the document file name.
1 From the printer properties dialog box, click the [Finishing] tab. Basic Print Options 3 2 Click [Finishing Details]. The [Finishing Details] dialog box opens. 3 3-60 Select [Auto] for [Print Banner Page].
4 5 Select either [Paper Source] or [Paper Type] from [Select by], according to the paper supply method you want to use. Specify the paper source or paper type to be used for the banner page ➞ click [OK]. NOTE Paper types that support banner page printing are Plain Paper, Recycled Paper, and Color Paper. 3 Click [OK] in the [Finishing] sheet.
Basic Print Options 3 3-62 Printing a Banner Page with a Print Job (Windows 98/Me/2000/XP/Server 2003)
Special Print Options 4 CHAPTER This chapter describes instructions for specifying the various special settings for printing a document. Overlay Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 What Is Overlay Printing?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2 Overlay Printing Using a Form File on Host . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Overlay Printing This section describes what Overlay Printing is, how to create a form file, and how to print with an Overlay. What Is Overlay Printing? Overlay Printing overlays text data onto a form file. For example, if the format of a report or bill is created in application software as a form file, you can create a perfectly formatted document by overlaying a text data document onto the form file. Special Print Options 4 To perform Overlay Printing, form files are required.
Overlay Printing Using a Form File on Host Creating a Form File If forms created in application software are stored in your computer as form files, you can use the forms for Overlay Printing. To store a form file in your computer, follow the procedure below. 1 Prepare a document in the application software. 2 In the application software, select [Print]. 3 Click [Properties] in the [Print] dialog box. 4 Display the [Page Setup] sheet. 5 Click [Page Options].
6 Click the [Overlay] tab. 7 Specify the overlay processing method.
● For printers other than the above: ❑ Select [Create a Form File] under [Processing Method] ➞ select [Stored in Host]. 8 Click [Browse] ➞ specify the file name ➞ click [Save]. 9 Enter a title, or a subtitle if necessary ➞ click [OK]. 10 Click [OK] in the [Page Setup] sheet. 11 Click [OK] in the [Print] dialog box. Special Print Options 4 The document is now registered as a form file in the folder you specified. NOTE The document is not printed out when creating a form file.
Printing with an Overlay To perform Overlay Printing using a form file stored in your computer, follow the procedure below. 1 In the application software, select [Print]. 2 Click [Properties] in the [Print] dialog box. 3 Display the [Page Setup] sheet. 4 Click [Page Options]. Special Print Options 4 The [Page Options] dialog box opens. 4-6 5 Click the [Overlay] tab. 6 Specify the overlay processing method.
● For the Color imageRUNNER C2000 series, imageRUNNER 2016, imageRUNNER 2020, imageCLASS 2300, LASER CLASS 700 series, and MF7280: ❑ Select [Use Overlay Printing] under [Processing Method]. Special Print Options 4 ● For printers other than the above: ❑ Select [Use Overlay Printing] under [Processing Method] ➞ select [Form File on Host].
7 Click [Browse] ➞ select the file name that you want to use as a form file ➞ click [Save]. 8 Click [OK] in the [Page Options] dialog box. 9 Click [OK] in the [Page Setup] sheet. 10 Click [OK] in the [Print] dialog box. The document is printed with the selected form file overlaid.
Creating a Form File Follow the procedure below to store an application created form file in the printer. 1 2 In the application software, prepare a document that you want to store as a form file. Select [Print] ➞ click [Properties] in the [Print] dialog box.
3 Display the [Page Setup] sheet. 4 Click [Page Options]. Special Print Options 4 The [Page Options] dialog box opens.
5 Click the [Overlay] tab ➞ select [Create a Form File] under [Processing Method] ➞ select [Stored in Device]. 6 Enter a file name in [File Name] ➞ click [OK]. 7 Click [OK] in the [Page Setup] sheet. 8 Click [OK] in the [Print] dialog box. Special Print Options 4 The document is now stored as a form file in the printer. The form file does not print out at creation.
Printing with an Overlay Using a Form File Stored in the Printer You can use image data for Form Composition stored in the printer to perform Overlay Printing.
3 Display the [Page Setup] sheet. 4 Special Print Options 4 Click [Page Options]. The [Page Options] dialog box opens.
5 Click the [Overlay] tab ➞ select [Use Overlay Printing with] under [Processing Method] ➞ select [Form File (Image data) on Device]. Special Print Options 4 6 Specify the form file name. ● If you acquire the printer status successfully: ❑ When the [File List] appears, select a form file. ● If you cannot acquire the printer status: ❑ Enter a form file name in [File Name].
7 For 2-sided printing, select which pages of the document are to be overlaid with a form file from [Apply to] ➞ click [OK]. 8 Click [OK] in the [Page Setup] sheet. 9 Click [OK] in the [Print] dialog box. Special Print Options 4 The document is printed with the selected form file overlaid.
Printing with an Overlay Using a NetSpot Resource Downloader Form File With the PCL5c and PCL5e printer driver, you can use form data downloaded to your printer with the Canon NetSpot Resource Downloader as a form file when performing Overlay Printing. IMPORTANT To use form files downloaded with the Canon NetSpot Resource Downloader, you need to acquire the resource information beforehand by following the procedure below. 1.
3 Display the [Page Setup] sheet. 4 Special Print Options 4 Click [Page Options]. The [Page Options] dialog box opens. 5 Click the [Overlay] tab.
6 Specify the overlay processing method.
● For printers other than the above: ❑ Select [Use Overlay Printing with] under [Processing Method] ➞ select [Form File (PDL data) on Device]. 7 Special Print Options 4 Click [Browse] ➞ select the form file name in the [Browse] dialog box ➞ click [Save].
Specifying the Print Quality The [Quality] sheet enables you to select print quality settings called Objectives. What Is an Objective? Objectives are print quality settings selected to give the best result for a particular type of print job.
Selecting and Editing an Objective You can select the Objective most suitable for your type of print job. You can also edit the settings of an Objective. Selecting an Objective 1 From the printer properties dialog box, click the [Quality] tab. Special Print Options 4 2 Click the required Objective from [Objective]. NOTE An explanation of the selected Objective is displayed below the [Objective] list box. Use the information to decide which Objective to use.
Editing the Objective Settings 1 From the printer properties dialog box, click the [Quality] tab. 2 Select the [Objective] whose settings you want to change.
3 Click [Details]. The [Detailed Settings] dialog box opens. Special Print Options 4 NOTE The dialog box differs depending on the printer model you are using. 4 Specify the new settings ➞ click [OK]. 5 Click [OK] in the [Quality] sheet.
Sending Document Data to a User Inbox or Mail Box Document data can be sent to a User Inbox or Mail Box on the machine. (Not available for the Color imageRUNNER C2000 series, imageRUNNER 2016, imageRUNNER 2020, imageCLASS 2300, LASER CLASS 700 series, and MF7280.) 4 You can display User Inbox or Mail Box names registered in the machine. Special Print Options Getting User Inbox or Mail Box Names To get User Inbox or Mail Box names automatically, follow the procedure below.
For Printers Other Than the Above 1 Click [Get Device Status] in the [Configuration] sheet (Windows 98/Me) or the [Device Settings] sheet (Windows NT 4.0/2000/XP/Server 2003). For instructions on how to get the device status, see "Setting Up the Printer Configuration," on p. 2-45. 2 Click [Yes] in the [Confirmation] message box. If this failed to get the device information, check the connections and settings.
Specifying the Box Number for Every Print Job in Advance If you specify a box number of a User Inbox or Mail Box in the [Store Destination] dialog box beforehand, every document will be sent to the specified User Inbox or Mail Box. 1 From the printer properties dialog box, select [Store] from [Output Method] in the [Page Setup], [Finishing], [Paper Source], or [Quality] sheets. Special Print Options 4 2 4-26 Click [Yes] in the message box.
The [Store Destination] dialog box opens. NOTE • If you close the [Store Destination] dialog box before you complete the operation for this box, the [Store Destination] icon appears in the top right corner of the dialog box. You can re-open the [Store Destination] dialog box by clicking this icon, or by repeating steps 1 and 2. • If you have already specified a box number of a User Inbox or Mail Box in the [Store Destination] dialog box, skip to step 4.
Specifying the Box Number for Each Print Job When You Send a Document to a User Inbox or Mail Box The [Store Destination] dialog box can open each time you send a document to a User Inbox or Mail Box, so that you can specify a box number for each print job. 1 In the [Printers] folder, right-click the printer icon for your printer ➞ click [Properties]. 4 3 Special Print Options 2 On the [Start] menu, point to [Settings] ➞ click [Printers]. 4 Select [Specify Inbox Number when Storing] ➞ click [OK].
6 Click [Properties] in the [Print] dialog box ➞ select [Store] from [Output Method] in the [Page Setup], [Finishing], [Paper Source], or [Quality] sheets. Special Print Options 4 NOTE If [Store] has already been selected from [Output Method], skip to step 9. 7 Click [No] in the message box. 8 Click [OK] in the printer properties dialog box.
9 Click [OK] in the [Print] dialog box. The [Store Destination] dialog box opens. Special Print Options 4 10 Specify the document name for the data to send to the User Inbox or Mail Box ➞ specify a box number. See step 3 of "Specifying the Box Number for Every Print Job in Advance," on p. 4-26. NOTE Depending on the printer you are using, you can send data to multiple mail boxes simultaneously. 4-30 11 Click [OK] in the [Store Destination] dialog box. 12 Repeat steps 5 to 11 for each print job.
Registering a Document as an Image Form When copying a document, a registered Image Form can be overlaid onto a document. To register a document as an Image Form, follow the procedure below. NOTE • Only the first page of the document is registered as an Image Form. • This option is available only for the imageRUNNER 600/550/60. From the printer properties dialog box, select [Store] from [Output Method] in the [Page Setup], [Finishing], [Paper Source], or [Quality] sheets.
2 Click [Yes] in the message box. The [Store Destination] dialog box opens. Special Print Options 4 NOTE • If you close the [Store Destination] dialog box before you complete the operation for this box, the [Store Destination] icon appears in the top right corner of the dialog box. You can re-open the [Store Destination] dialog box by clicking this icon, or by repeating steps 1 and 2. • If you have already specified a box number of a Mail Box in the [Store Destination] dialog box, skip to step 4.
3 Specify the document name for the data to register as an image form➞ select [Image Form Memory] from [Store Destination]. ● If you want to save the data with a new name: ❑ Select [Enter Name] ➞ enter the name for [Name]. ● If you want to save the data with the same name as the document: ❑ Select [Use File Name]. 4 Click [OK] in the [Store Destination] dialog box. 5 Click [OK] in the printer properties dialog box.
Secured Printing Secured Printing saves a print job in the printer with a certain password and outputs it later only if the correct password is verified. This feature is useful when printing a confidential document. NOTE • For the imageRUNNER 2000/1600, imageRUNNER 2010F, and LBP-2000, this option is available only when an optional hard disk is installed in the printer.
2 3 Click [OK] in the message box to switch to the Secured Print mode. Click the [Secured Print Settings] icon to open the [Secured Print Settings] dialog box ➞ enter the user name and password for the current print job. 4 5 Special Print Options 4 Click [OK] in the [Secured Print Settings] dialog box. Click [OK] to close the printer properties dialog box ➞ click [OK] in the [Print] dialog box. The [Confirm Password] dialog box opens.
7 On the printer's control panel or Remote UI, select the print job you want to print ➞ enter the password. The print job is output only if the correct password is entered.
Editing Multiple Print Documents Together (Windows 98/Me/2000/XP/Server 2003) You can edit and print two or more documents created using different application software as a single document. From the printer properties dialog box, select [Edit and Preview] from [Output Method] in the [Page Setup], [Finishing], [Paper Source], or [Quality] sheets. 4 Special Print Options 1 2 Click [OK] in the message box to switch to the Edit and Preview mode.
3 Click [OK] to close the printer properties dialog box ➞ click [OK] in the [Print] dialog box. If the Edit and Preview mode is selected when printing a document, Canon PageComposer starts instead of outputting printed pages. Special Print Options 4 4 Repeat steps 1 to 3 for the other documents. You can use Canon PageComposer to combine or change the order of two or more documents. For details about using Canon PageComposer, see the Canon PageComposer Help.
Promoting a Print Job You can give the desired job top priority for printing over all other print jobs waiting in the print queue. 1 From the printer properties dialog box, select [Promote Print] from [Output Method] in the [Page Setup], [Finishing], [Paper Source], or [Quality] sheets.
2 3 Click [OK] in the message box to switch to the Promote Print mode. Click [OK] to close the printer properties dialog box ➞ click [OK] in the [Print] dialog box.
Job Accounting Feature This section describes Job Accounting, how to specify the ID and password for Job Accounting, and how to print with Job Accounting. Job Accounting Overview A document will be printed only if the specified ID and password are verified as valid. IMPORTANT • If you are using a shared printer in the Print Server (Point and Print) environment, it is necessary to install the Canon Driver Information Assist Service in the server PC in order to use the Job Accounting feature.
Specifying the ID and Password In order to print documents using the Job Accounting feature, follow the procedure below to specify the ID and password 1 On the [Start] menu, point to [Settings] ➞ click [Printers]. NOTE • If you are using Windows XP Professional/Server 2003, on the [Start] menu, click [Printers and Faxes]. • If you are using Windows XP Home Edition, on the [Start] menu, click [Control Panel] ➞ [Printers and Other Hardware] ➞ [Printers and Faxes].
4 Click [Get Device Status] to confirm that [Job Accounting] is selected, or manually select [Job Accounting]. Special Print Options 4 5 Click [Settings] to open the [ID/Password Settings] dialog box ➞ enter the ID and password. NOTE • The ID and password can be changed when printing a document only if [Confirm ID/Password when Printing] is selected in the [ID/Password Settings] dialog box. • For Windows NT 4.
6 7 Click [Verify] to confirm that the specified ID and password are valid. Click [OK]. Printing with Job Accounting (Windows 98/Me) To print with Job Accounting, follow the procedure below. 1 In the application software, select [Print]. 2 Click [Properties] in the [Print] dialog box. Special Print Options 4 3 4 5 Specify the various settings in the printer properties dialog box. Click [OK] to close the printer properties dialog box ➞ click [OK] in the [Print] dialog box.
Printing with Job Accounting (Windows NT 4.0/2000/XP/ Server 2003) The procedure for printing with Job Accounting differs depending on whether [Allow Password Setting] is selected in the [Device Settings] sheet. With Allow Password Setting Selected The password for Job Accounting can be specified in advance in the [ID/Password Settings] dialog box. In the application software, select [Print]. 2 Click [Properties] in the [Print] dialog box.
4 Click [OK] to close the printer properties dialog box ➞ click [OK] in the [Print] dialog box. 5 In the [Confirm ID/Password] dialog box, enter the password ➞ change the ID if necessary. NOTE You can leave the password blank. 6 Click [OK]. The document is printed with the specified ID and password.
Specifying the Color and Grayscale Settings Selecting an objective in the [Quality] sheet automatically sets the color or grayscale settings to suit the document that is to be printed. You can also set the desired color or grayscale settings manually. This section describes the color and grayscale settings and how to specify the color and grayscale settings.
Color Printing You can specify the detailed color settings manually. For manual color settings, follow the procedure below.
4 Display the [Color Adjustment] sheet. Special Print Options 4 5 Adjust the color intensity, brightness, and contrast. For detailed information about the [Color Adjustment] sheet, see the Online Help.
6 Click the [Matching] tab. Special Print Options 4 7 Specify the matching mode, the matching method, and the monitor profile. For detailed information about the [Matching] sheet, see the Online Help. 4-50 8 Click [OK]. 9 Click [OK] in the [Quality] sheet.
Grayscale Printing You can specify the detailed grayscale settings manually when printing color documents in grayscale. For manual grayscale settings, follow the procedure below. 2 From the printer properties dialog box, click the [Quality] tab. Display the [Color Adjustment] or [Grayscale Adjustment] sheet for manual grayscale setting. ● For color printers: ❑ Select [Black and White] from [Color Mode] ➞ select [Manual Color Settings].
❑ Click [Color Settings]. The [Color Settings] dialog box is displayed. Special Print Options 4 ● For black-and-white printers: ❑ Select [Manual Grayscale Settings].
❑ Click [Grayscale Settings]. The [Grayscale Settings] dialog box is displayed. Special Print Options 4 3 Adjust the brightness and contrast. For detailed information about the [Color Adjustment] and [Grayscale Adjustment] sheets, see the Online Help.
4 Click the [Matching] tab. Special Print Options 4 5 Specify the matching mode, the matching method, and the monitor profile. For detailed information about the [Matching] sheet, see the Online Help. 4-54 6 Click [OK]. 7 Click [OK] in the [Quality] sheet.
Appendix 5 CHAPTER This chapter provides information about additional software used with the PCL5c, PCL5e, and PCL6 printer drivers. Additional Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 Canon Port Setting Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-2 Device Status Extension (Windows 2000/XP/Server 2003) . . . . . . . . . . . . . . . . . . . . . . . . . .
Additional Software This section describes additional software used with the printer driver. Canon Port Setting Tool The Canon Port Setting Tool enables you to correspond the device driver installed in your computer with the network address for the device.
Device Status Extension (Windows 2000/XP/Server 2003) If you use a shared printer in Windows 2000/XP/Server 2003, you can browse information on the shared printer and manage print jobs through a web browser. Installing the Device Status Extension in Windows 2000/XP/Server 2003 enables you to browse detailed information on printers supporting the Device Status Extension. The Device Status Extension also enables you to start NetSpot Console from the [Device Status Extension] window to set up printers.
Operational Requirements and Restrictions in the Microsoft Cluster Server Environment This section describes operational requirements and restrictions for using a printer in the Microsoft Cluster Server environment. When Installing the Printer Driver Take notice of the following points when using a printer in the Microsoft Cluster Server environment: • Only server cluster environments in Microsoft Cluster Server are guaranteed to work with the printer drivers.
2 3 4 On the [Start] menu, click [Cluster Administrator] to start Cluster Administrator. From the [File] menu, point to [File] ➞ click [Open Connection]. Right-click the [Resources] folder icon in the left pane of Cluster Administrator➞ point to [New] ➞ click [Resource]. The [New Resource] dialog box opens. 5 Enter the name and description of the new resource. Appendix 5 6 Select [Generic Service] for [Resource type] ➞ select the same group as the print cluster resources for [Group] ➞ click [Next].
7 Select the nodes in which the Canon Driver Information Assist Service is installed from [Available nodes] ➞ click [Add]. The nodes you selected are added to [Possible owners]. Appendix 5 8 9 10 5-6 Click [Next]. Leave [Dependencies] blank in the next dialog box ➞ click [Next]. Enter in [Service name] ➞ click [Next].
Make sure that [Registry Replication] is not selected ➞ click [Finish]. The resource is created, and the Canon Driver Information Assist Service is registered as a cluster object.
PCL Driver Functions List The available functions for the Canon PCL printer driver vary depending on the version of Windows you are using and the type of your driver (PCL5c, PCL5e, or PCL6).
: Available : Unavailable Windows 98/Me Sheet Settings PCL5c/5e Rendering Rate [Quality] sheet Windows NT 4.
Local Standard Paper Sizes List To Use Local Standard Paper, you need to register the paper size that you will be using as a custom paper size beforehand.
imageRUNNER 105, imageRUNNER 105+, imageRUNNER 105+ -M3, imageRUNNER 7200, imageRUNNER 8070, imageRUNNER 8070-M3, imageRUNNER 85, imageRUNNER 85+, imageRUNNER 85+ -M3, imageRUNNER 8500, imageRUNNER 9070, and imageRUNNER 9070-M3: Width (mm) Height (mm) Oficio 216.0 317.0 Ecuadorian Oficio 220.0 320.0 Mexican Oficio 216.0 341.0 Argentine Oficio 220.0 340.0 Folio 210.0 330.0 Argentine Letter 220.0 280.0 Government Letter 203.0 267.0 Argentine Legal 220.0 340.0 Government Legal 203.
imageRUNNER 2000/1600, imageRUNNER 2010F, imageRUNNER 3300/2800/ 2200, imageRUNNER 3300i, imageRUNNER 3320G, imageRUNNER 3320i/ 2220i, imageRUNNER 3320N/2220N, imageRUNNER 5000i, imageRUNNER 6000/5000, imageRUNNER 6000/5000-L1, imageRUNNER 6020/5020, imageRUNNER 6020i/5020i, imageRUNNER 6020/5020-M2, and imageRUNNER 6570/5570-M3: Paper Name Appendix 5 5-12 Width (mm) Height (mm) Oficio 216.0 317.0 Ecuadorian Oficio 220.0 320.0 Bolivian Oficio 216.0 355.0 Mexican Oficio 216.0 341.
imageRUNNER C3170, imageRUNNER 2016, imageRUNNER 2020, imageRUNNER 2230, imageRUNNER 2830, imageRUNNER 2870/2270, imageRUNNER 2870G/2270G, imageRUNNER 3530, imageRUNNER 4570/ 3570, imageRUNNER 4570G/3570G, and MF7280: Width (mm) Height (mm) Oficio 216.0 317.0 Ecuadorian Oficio 220.0 320.0 Bolivian Oficio 216.0 355.0 Mexican Oficio 216.0 341.0 Argentine Oficio 220.0 340.0 Folio 210.0 330.0 Argentine Letter 220.0 280.0 Government Letter 203.0 267.0 Government Legal 203.0 330.
imageRUNNER 5070 and imageRUNNER 6570/5570: Paper Name Appendix 5 5-14 Width (mm) Height (mm) Oficio 216.0 317.0 Ecuadorian Oficio 220.0 320.0 Bolivian Oficio 216.0 355.0 Mexican Oficio 216.0 341.0 Argentine Oficio 220.0 340.0 Folio 210.0 330.0 Argentine Letter 220.0 280.0 Government Letter 203.0 267.0 Argentine Legal 220.0 340.0 Government Legal 203.0 330.0 Australian Foolscap 206.0 337.0 Foolscap 216.0 330.0 Korean Government Legal 190.0 268.0 Chinese K8 270.
imageRUNNER 7105/7095/7086 and imageRUNNER 7105/7095/7086-S1: Width (mm) Height (mm) Oficio 216.0 317.0 Ecuadorian Oficio 220.0 320.0 Mexican Oficio 216.0 341.0 Argentine Oficio 220.0 340.0 Folio 210.0 330.0 Argentine Letter 220.0 280.0 Government Letter 203.0 267.0 Argentine Legal 220.0 340.0 Government Legal 203.0 330.0 Australian Foolscap 206.0 337.0 Foolscap 216.0 330.0 Korean Government Legal 190.0 268.0 Chinese K8 270.0 390.0 Chinese K16 195.0 270.
Glossary B Banding Specifies the method for the banding operation performed in the printer driver. As banding defines the output image data of a page by processing it in rectangular bitmap sections called bands, you can print a document faster. 5 C Appendix If [On] is selected, banding is constantly performed; but if [Auto] is selected, banding is performed only when necessary. Canon Driver Information Assist Service A software module that is specialized in retrieval of information from devices.
H HP-GL/2 A graphics language that enables computer applications to draw graphic images using printers. Images in HP-GL/2 are represented as vector graphics, in which vector objects describe an image in terms of geometric shapes, such as lines and polygons, and fills. HP-GL/2 is supported by your Canon machine. L Log on Entering a user name and password as a means of user authentication to start a computer session or access to a service. N 5 Appendix NDPS Novell Distributed Print Services.
Port Setting Tool A software utility that enables you to confirm and reset the correspondence between the port of the device driver installed in Windows and its network address. The Port Setting Tool is useful when the printer driver is unable to acquire the device status information properly. If NetSpot Job Monitor is installed in your computer, you can also use this utility to set the update interval for acquiring information and for checking device types.
Index A Canon Driver Information Assist Service, 2-7, Accessing printer properties dialog box Canon NetSpot Resource Downloader, 4-2, 4-8 2-15, 2-33, 2-45, 4-41, 5-4, 5-16 3-3 From application software (Windows NT 4.0/ 2000/XP/Server 2003), 3-5 Canon PageComposer, 4-38 Canon Port Setting Tool, 5-2 Collate, 3-20, 3-22 Color, 4-47, 4-48 From printers folder (Windows 98/Me), 3-4 Color printing, 4-48 From printers folder (Windows NT 4.
F Canon Driver Information Assist Service, 2-7, Finishing, 3-18, 3-20, 3-22, 3-23, 3-29, 3-35 Printer driver, 2-2 Finishing options, specifying, 3-20 Uninstalling printer driver, 2-43 2-15, 2-33, 2-45, 4-41, 5-4, 5-16 Booklet printing, 3-23, 3-35 Updating alternate printer driver, 2-40 Output option, 3-20 Updating existing printer drivers, 2-35 Printing with mixed paper sizes, 3-28 USB Connection Installation , 2-24 Selecting, 3-20 Interleaf Sheets, 3-37 Using Creep Correction for Booklet Pri
N P NDPS (Novell Distributed Print Services), 5-2, Page Layout, 3-16 5-17 Page Options, 4-3, 4-6 NetSpot, 5-3, 5-17 Page size, 3-13, 3-14 NetSpot Console, 5-3, 5-17 Paper Selection, 3-32, 3-33, 3-34, 3-37 Paper source, specifying, 3-31 Printing all pages from same paper source, O 3-32 Designs, 4-20 General, 4-20 Graphics, 4-20 Photo image, 4-20 Publications, 4-20 Text, 4-20 Toner saver, 4-20 Online Help, 1-10, 4-49, 4-50, 4-53, 4-54, 5-2 Operating system software, 1-9, 2-22 Operational requireme
Adding/Editing Profiles in Profile Sheet, 3-10 System requirements, 1-9 Selecting, 3-8 Computer, 1-9 What is profile?, 3-8 Operating system software, 1-9, 2-22 Promote Print, 4-39 With server-based Computing Environment, 1-9 Promoting print job, 4-39 Protocol, 5-18 PS (PostScript), 1-2, 5-18 T R TCP/IP, 2-11 README.
W Where to find Help, 1-10 Canon authorized dealers, 1-10 Online Help, 1-10, 4-49, 4-50, 4-53, 5-2 README.
Appendix 5 5-24 Index
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON U.S.A., INC. One Canon Plaza, Lake Success, NY 11042, U.S.A. CANON CANADA INC. 6390 Dixie Road Mississauga, Ontario L5T 1P7, Canada CANON EUROPA N.V. Bovenkerkerweg 59-61 1185 XB Amstelveen, The Netherlands CANON FRANCE S.A.S. 17, quai du Président Paul Doumer 92414 Courbevoie Cedex, France CANON COMMUNICATION & IMAGE FRANCE S.A.S.
