User`s guide

10-4 Reports and lists Chapter 10


Adjusting the RX REPORT setting
Your machine can print an RX (reception) report after receiving a document. You can set it to
print every time it receives a document, or only when an error occurs. Alternatively, you can
disable printing of a report.
Follow this procedure to adjust this setting:
1 Press [Menu].
2 Use [22
22
] or [33
33
] to select <USER DATA>.
3 Press [OK].
4 Use [22
22
] or [33
33
] to select <FAX SETTINGS>.
5 Press [OK].
6 Use [22
22
] or [33
33
] to select <REPORT SETTINGS>.
7 Press [OK].
8 Use [22
22
] or [33
33
] to select <RX REPORT>.
9 Press [OK].
10 Use [22
22
] or [33
33
] to select the setting you want.
• Select:
–<OUTPUT NO> to disable printing of a report.
–<PRINT ERROR ONLY> to print a report only when a reception error occurs.
–<OUTPUT YES> to print a report every time you receive a document.
11 Press [OK].
12 Press [Stop/Reset].
USER DATA
1.TEL REGISTRATION
FAX SETTINGS
1.USER SETTINGS
REPORT SETTINGS
1.TX REPORT
RX REPORT
OUTPUT NO