Setup Sheet READ THIS SHEET FIRST Thank you for purchasing the Canon imageCLASS MPC190. To get your machine ready for use, please follow the instructions in this Setup Sheet before referring to any other documentation. Unpack the machine and its components.
Remove the shipping materials. 1 Place the machine on a flat surface. 2 Remove all shipping tapes from the exterior of the machine. NOTE • DO NOT remove the USB label A at this stage. USB label A Attach and close the multi-purpose tray. Connect the power cord. NOTE • Before turning on the power, make sure the document cover A is closed. • Please note that the cartridge (printhead and ink tanks) is installed in steps 5 and 6. A PLEASE WAIT DISPLAY LANGUAGE < ENGLISH 1 Plug the power cord into a socket.
Load paper. 1 Open the multi-purpose tray q, then the tray extension w. q w 2 Place a stack of paper (print side up) in the multi-purpose tray q and adjust the paper guide A to the width of the stack w. Make sure the stack does not exceed the paper limit mark B. q w A B NOTE • When you are not printing, close the multi-purpose tray. 3 Open the paper output tray q, then the tray extension w. Printouts will exit the machine here.
Install the printhead. IMPORTANT • To turn off the machine, be sure to always press [ON/OFF]. This will ensure that the printhead is capped and prevent it from drying up. • If you are not using the machine for a long period of time, we recommend that you print (in black and colour) or clean the printhead approximately once a month to maintain the printhead in good working condition. 1 Remove the tape q, then open the inner cover w. • The printhead holder automatically moves to the left of the machine.
Install the ink tanks. 1 Start with the black ink tank. Remove the ink tank from its packaging, hold it as shown below, then remove the protective cap A. NOTE • Do not shake or drop the ink tank as the ink may leak and stain your clothes or hands. • Do not attempt to reattach the protective cap A once you remove it. • Once you remove the protective cap A, do not touch the ink port B. A B Ma de in Ja pan Bla ck BCTank I-24 Ink 2 Insert the black ink tank into the right hand slot.
Align the printhead. NOTE • If you will be installing the MultiPASS Suite software, you can also align the printhead from the software. For details, see p. 8-7 of the Basic Guide. 1 When the LCD A displays the following, press [OK]. ALIGN PRINT HEAD PRESS OK KEY A The machine will print a horizontal pattern, and the LCD will display: CHANGE H VALUE A 0 Column A Value for column A 2 In column A on the printout, note which box has the most solid image.
Install the software. IMPORTANT • DO NOT connect the USB cable before installing the software. NOTE • Windows 98/Me users: You need to have “Client for Microsoft Networks“ installed before installing the MultiPASS Suite software. For details, refer to p. 9-1 of the Basic Guide. • When installing the software in Windows XP or Windows 2000, log onto the system as a member of the Administrator group. • If you have previously installed an earlier version of the MultiPASS Suite software (version 4.
• Windows 98/Me/2000 users: Once connected, the USB driver will automatically be installed. • Windows XP users: Once connected, the “Found New Hardware Wizard” dialogue box appears. Click [Install the software automatically], then click [Next]. NOTE • Windows XP users: If during the installation process the dialogue box on the right appears A, select the language you prefer, then click [Next]. A 7 Follow the on-screen instructions to complete installation.