User Manual

48
Loading cards
About the Card Guard
When scanning plastic cards, use of card guard is recommended.
Attach the card guard to the back of the unit (Rear Card Slot) as shown
in the figure below.
Use the card slot when scanning plastic cards. Scan the cards one at
a time according to the following procedure:
A Orient the front side of the card toward the left, and insert the
card straight into the card slot.
B When the scanner detects the card, release the card, and use
the application program to start scanning.
When you use an application program to start scanning, the card
is fed and scanning starts.
During scanning, a portion of the card will protrude from the rear
card slot at the rear of the scanner.