User Manual

E Spin the rollers while wiping them clean with a firmly wrung

cloth dampened with water.

There are 14 roller positions, as shown in the diagram below.

NOTE

• Use cotton swabs to clean the rollers.

• Rollers in positions J, M, and N are turned by the roller in position L.

Turn the roller in position L to wipe the rollers.

• Rollers in positions A to C are replaceable. Replace rollers when cleaning

them. (See “Replacing the Rollers,” on p. 73.)

F Use a clean dry cloth to clean the entire scanning glass.

G Close the Left Maintenance Cover.

Scanning Glass