User Manual

78
Power consumption
Network Specifications
AC Adapter Specifications
■ Use the recommended operating environment for the ink
cartridge when using the imprinter.
■ You can use the functions noted above if your software
supports them.
■ These functions may not work depending on your computer’s
capabilities and the software you are using.
Specifications are subject to change without notice.
Replacement parts
Exchange roller kit (product code: 1732C001)
Kit to replace the rollers (Pickup Roller, Feed Roller, and Separation
Roller).
(See “Replacing the Rollers,” on p. 73)
Ink cartridge
This ink cartridge is used by the imprinter.
(See “About the Ink Cartridge,” on p. 25)
Ink Disposal Tank (product code: 1732C002)
This ink disposal tank is used by the imprinter.
(See “Replacing the Ink Disposal Tank,” on p. 71)
• Contact your local authorized Canon dealer or service representative
for detailed information about the replacement parts.
Other functions
Automatic paper size detection, Ultrasonic
double feed detection, Dropout color,
Deskew
Dimensions 203.6 mm (H) x 170 mm (W) x 238.2 mm
(D) (8.0" (H) x 6.7" (W) x 9.4" (D))
Weight CR-150: Approximately 3.2 kg (7.05 lb)
CR-120: Approximately 3.2 kg (7.05 lb)
Power requirement AC 100-120V (60 Hz) or AC 220-240V
(50/60 Hz)
Scanning Sleep mode
CR-150 120V
220-240V
23W or less 2.1W or less
CR-150N/CR-120N 120V
220-240V
23W or less 2.2W or less
CR-120/CR- 120UV 120V
220-240V
23W or less 2.1W or less
Noise Less than 72 dB
Operating environment Temperature: 10°C to 32.5°C (50°F to
90.5°F)
Humidity: 20% to 80% RH
Protocol TCP/IP
IP Address Obtained automatically (DHCP
supported) or fixed address
Other Active Directory (NTLM authentication)
and OpenLDAP (simple authentication)
supported
Model number MG1-5039
Input AC 100-240V 50/60Hz 1.06-0.6 A
Output DC24V 2.0A
Weight Approximately 0.2 kg (0.44 lb) (excluding
power cord)