User Manual

USA.CANON.COM
SPECIFICATIONS
Print Method: Thermal Line-dot Printing
Printing Direction: Unidirectional with Friction Feed
Dot Density: 8 dot/mm
Paper Feeding Pitch: 0.125 mm
Cutter Method: Full Cut/ Partial Cut
Max. Print Width: About 2.8" (72 mm)
Print Speed: Up to 5.9"/sec (150 mm/sec)
Interface: High Speed USB 2.0
Operating Temperature: 0
o
to 40
o
C (32
o
to 104
o
F)
Operating Humidity: 30% to 85% RH (No Dew Condensation)
Storage Temperature: -30
o
to 50
o
C (-21
o
to 122
o
F)
Storage Humidity: 10% to 90% RH (No Dew Condensation)
Dimensions: 5.31” (H) x 6.7” (W) x 11” (D)
Weight: 3.5 lb.
Power Supply: AC 100-240 V 50/60 Hz
Power Consumption: Printing: Maximum 55 W
Sleep Mode 0.7 W
With Power Switch Off: 0.4 W
Bundled Software: Printer Driver, OPOS Driver
Compatible Scanners: Canon imageFORMULA CR-120, CR-150,
CR-120 MSR, CR-150 MSR
Item Number: 1732C004AA
As an ENERGY STAR

Partner, Canon U.S.A., Inc. has qualified this model as meeting the ENERGY STAR energy
efficiency criteria through an Environmental Protection Agency recognized certification body. ENERGY STAR
and the ENERGY STAR mark are registered U.S. marks. Canon is a registered trademark of Canon Inc. in the
United States and may also be a registered trademark or trademark in other countries. imageFORMULA is a
registered trademark of Canon Electronics, Inc. All other referenced product names and marks are trademarks
of their respective owners. Specifications and availability subject to change without notice. Not responsible for
typographical errors.
©2018 Canon U.S.A., Inc. All rights reserved.
0118-RP10B-PDF-IH
* CR-120/CR-150 sold separately.
** Magnetic Swipe Reader available only with purchase of CR-120 MSR or CR-150 MSR.
▲
Receipts can be customized via OPOS interface.
LOW RUNNING COSTS
Since it uses thermal technology, the RP10 thermal receipt
printer is easy to use and maintain. It does not require ongoing
replacement of certain consumables such as ink cartridges or
printer ribbons, unlike traditional ink printers. Additionally, this
printer is conveniently compatible with standard thermal paper
and does not require any special paper or supplies. Plus, since
thermal printing requires fewer moving parts than traditional dot
matrix printers, the RP10 thermal receipt printer is very reliable.
This all contributes to lower running costs, making it exceptionally
more affordable than traditional printing method over the long-
term and well-suited for teller station environments that produce
a high volume of receipts.
CUSTOMIZES RECEIPTS
▲
The RP10 thermal receipt printer can create custom receipts
using the included OPOS driver. These receipts can incorporate
important business information, including text, images,
watermarks, logos, and any other additional patterns and
designs. And the thermal technology can deliver this information
through sharper and more consistent print images than
traditional printing methods.
ENVIRONMENT IN MIND
The RP10 thermal receipt printer meets ENERGY STAR
®
guidelines
for energy efficiency and complies with the EU WEEE directive for
the reduction of hazardous substances and waste products.
Paper Specifications
Type: Thermal Roll Paper
Width: 80+0, -1 mm
Outer Diameter: Up to 083 mm
Inner Diameter : 08 mm or More
Thickness: 60 to 100 mm