User Manual
35
Scan Batch to Printer
A Click [Scan Batch to Printer] from the [File] menu.
B Select Simplex or Duplex, and then click [Start Scanning].
• You can also start scanning with pressing the START Button.
F Scanning starts.
NOTE
• If “Sort Method” is set in the software application, the document will be
ejected to one of the three Eject Pockets according to the sort methods
that have been set.
• When printing with the imprinter, ink may get on the leading edge of the
document because the documents are ejected onto the printed surface.
• When Using the Accompanying Scanning Utility for CR-135i/CR-190i:
Scanning is suspended and a message is displayed when the Eject
Pocket becomes full of documents. Scanning resumes when the
documents are removed from the Eject Pocket (Eject Pocket full
detection).
Eject Pocket 3
Flapper
Separates documents
Eject Pocket 2
Eject Pocket 1
Ink residue
Printed text or bitmap
(back side)