User Manual

10
4 Click [Accessories], and then click [Run].
5 Enter “D:\SU190i\setup.exe” in the [Open] fields, and then
click [OK].
Installation starts.
6 Follow the instructions on the screen to complete the
installation.
IMPORTANT
The computer may need to be restarted, after the installation,
depending on the operating system. If this is necessary, make
sure to restart the computer.
Connecting the Scanner to a Computer
The only way to connect the scanner to your computer is with a USB
cable.
CAUTION
• Do not turn OFF the scanner or remove the interface cable
when an application is running.
• Turn OFF the computer and the scanner before changing the
cable.
USB Connections
Connect the scanner and the computer with the cable provided or a
Hi-Speed USB 2.0 cable.
NOTE
Connect the type B plug (square) to the scanner and connect the
type A plug (flat) to the USB port on the computer.
Type A Plug Type B Plug
USB Cable
USB Connector