Reference Guide (Mac OS X) ♦ Please read this manual before operating this scanner. ♦ After you finish reading this manual, store it in a safe place for future reference.
READ CAREFULLY BEFORE OPENING THE SEALED DISK PACKAGE CANON SOFTWARE LICENSE AGREEMENT IMPORTANT-READ THIS AGREEMENT BEFORE OPENING THE SEALED DISK PACKAGE! BY OPENING THE SEALED DISK PACKAGE, YOU ARE DEEMED TO AGREE TO BE BOUND BY THIS AGREEMENT. This legal document is a license agreement between you and CANON ELECTRONICS INC. (“Canon”). BY OPENING THE SEALED DISK PACKAGE, YOU ARE DEEMED TO AGREE TO BE BOUND BY THE TERMS OF THIS AGREEMENT.
Setup Guide Please read first. Although this manual uses the DR-2510M in the descriptions, DR-2010M operations are identical. If you are using the DR-2010M, please read “DR-2010M” in place of “DR-2510M.” Installing the Feed Roller 1 Slide the document guides to the left and right, and open the roller cover. 2 Document guides Checking the Accessories If any of the items listed below are missing or damaged, contact your local authorized Canon dealer or service representative.
Installing the Software Connecting to a Computer POWER Before Installation Connectors ● Do not connect the scanner to the computer before installing the software. ● Close all other applications before installing the software. ● When using CaptureOnTouch with a Windows driver, refer to the Reference Guide (Windows) and User Manual that are stored on the Setup disc as PDF files. 1 Insert the Setup Disc into the computer’s CD-ROM drive. 2 Power switch Click [DR-2510M Installer].
■ International ENERGY STAR® Office Equipment Program Table of Contents As an ENERGY STAR® Partner, Canon Electronics Inc. has determined that this machine meets the ENERGY STAR® Program guidelines for energy efficiency. The International ENERGY STAR® Office Equipment Program is an international program that promotes energy saving through the use of computers and other office equipment.
Introduction Thank you for purchasing the Canon DR-2010M/DR-2510M Document Scanner. Please read this manual thoroughly before using the scanner to familiarize yourself with its capabilities, and to make the most of its many functions. After reading this manual, store it in a safe place for future reference. Manuals for the Scanner Documentation for this scanner consists of the following manuals.
Important Safety Instructions ● Avoid exposing the scanner to rapid changes in temperature. If the room in which the scanner is installed is cold but rapidly heated, water droplets (condensation) may form inside the scanner. This may result in a noticeable degradation in scanning quality. ● The following conditions are recommended for optimal scanning quality: Room temperature: 10 °C to 32.5 °C (50 °F to 90.
■ Clean the scanner using a slightly dampened cloth which has been well wrung out. Never use alcohol, benzene, paint thinner, or any other flammable substances. ■ If the scanner makes strange noises, or gives off smoke, heat, or strange odors, or the scanner does not function or other abnormalities occur when you use the machine, immediately turn the power switch OFF, and disconnect the power plug from the power outlet.
■ Do not allow water or flammable substances (alcohol, paint thinner, benzene, etc.) to spill into the scanner, as this may result in a fire or electric shock. ■ Turn OFF the power switch for safety when not using the scanner for a long period of time, such as overnight. Also, turn OFF the power switch, and disconnect the power cord from the power outlet for safety when the machine will not be used for an extended period of time, such as during consecutive holidays.
Features of the DR-2010M/DR-2510M Document Scanner ● Auto Color Detection The scanner detects whether the scanned document is in color or black and white, and saves the image accordingly. ● Folio Scan You can scan folded documents. The scanner will scan both sides and combine the scanned images into a single image. ● Deskew The scanner straightens scanned images when it detects that the document was placed askew.
● Auto Start The scanner is equipped with an auto start function, which enables scanning to be automatically started when a document placed in the feeder is detected. ● Sleep Mode The scanner is designed to save energy by entering the sleep mode when it is not scanning documents. Hint Some functions may not be available depending on the software you are using.
Names and Functions of Parts ■ Back View This section describes the name and function of each part. Make sure to read this section and familiarize yourself with the parts of the scanner before using the scanner. Power Switch This switch is used to turn the scanner ON and OFF. If you set the switch to [AUTO], the scanner is linked to be automatically turned ON/OFF in accordance with the power of the computer. ■ Front View/Right-Side View Document Feed Tray Open to place documents.
Documents • Scanning the following types of documents can cause a paper jam or malfunction. To scan such a document, make a photocopy of the document and then scan the photocopy. The scanner can scan documents ranging in size from business cards and checks to LTR/A4. The document sizes that this scanner can scan are shown below. Plain Paper Size Width: 1.97" to 8.5" (50 mm to 216 mm) Length: 2.12" to 14.02" (53.9 mm to 356mm)* Paper weight: (Page separation mode) 14 to 32 lb bond (52 to 128 g/m2) 0.
Placing Documents 1 3 Open the document feed tray. Place the document. Insert the document into the feeder with the reverse side facing you, and the top of the document facing down. Shift the pages of a document stack slightly, so that the leading edge of the first page enters the scanner first. Insert the document with the reverse side facing you • Open the document eject tray when you want to stack output documents. You can also perform scanning without opening the tray.
Placing Cards IMPORTANT When placing cards that are thicker than standard documents, be sure to perform the following. ● Set the feed selection lever to (Bypass). • Before you place a document, check to make sure it does not contain paper clips, staples, or other small metal objects. These items may cause a fire or electrical shock, damage the document, or cause a paper jam or scanner malfunction. • Do not wear loose clothing or jewelry that may get caught in the scanner while you are using it.
Supplied Software Scanner Driver Use the following software supplied with the scanner to scan documents. Select which software to use based on your intended purpose. When you install the supplied software using the Setup disc, the scanner driver is installed with CaptureOnTouch. The driver can be opened from TWAIN-compatible applications (e.g. the Mac OS X standard application, Image Capture) for use in scanning operations. For details on the scanner driver, see the User Manual (electronic manual).
Scanning with CaptureOnTouch Select Scan Job What is CaptureOnTouch? CaptureOnTouch is a scanning application that allows you to scan documents using easy-to-follow on-screen instructions. Save to folder Save to a specified folder. (Network) DR-2510M/DR-2010M Print Print to a specified printer. Send to application Open scanned images with a specified application.
Quitting CaptureOnTouch Starting CaptureOnTouch Click menu. CaptureOnTouch resides on your system when you start up your computer, and a CaptureOnTouch icon appears on the menu bar (default). (CaptureOnTouch) of the menu bar, and click [Exit] in the When you double-click (CaptureOnTouch), CaptureOnTouch starts and the main screen appears. The application no longer resides on the system, and the menu icon disappears.
3 Scan First Operation Flow Click [Scanner setting] to display the [Scanner setting] dialog box, and configure the scanner settings. Scan document ▼ Select output method ▼ Configure output settings ▼ Output scanned images 1 2 Place the document in the scanner (See p. 10). For details on scanner setting items, refer to the Help. When you are finished configuring, click the [OK] button to close the [Scanner setting] dialog box. Click the [Scan First] tab. 4 Click the [Start] button.
5 6 The name of the output button differs depending on the selected output method. If you select [Save to folder] for the output method, for example, the output button appears as [Save]. The completion screen appears after the scanned images are output. This completes [Scan First] scanning. Specify the output method. Configure settings for the output method, and click the output button to output the scanned images. Hint • Click [Return to main screen] to return to the main screen of [Scan First].
Output Method Settings CaptureOnTouch provides four output methods for processing scanned images. The output settings that appear differ depending on the output method selected. [Save to folder] [Print] Save scanned images to a specified folder. When this method is selected, you must configure settings for the image file to be saved. Print scanned images to a specified printer. When this method is selected, you must specify the printer to which images will be printed.
Starting [Scan First] with the Job Button Under default settings, [Scan First] is assigned to the first job button on the scanner. Job button When you press job button 1 after placing your document in the scanner, CaptureOnTouch starts up and [Scan First] begins. When document scanning is finished, the output method selection screen appears. Perform the procedure from step 5 onward to output the scanned images.
2 Select Scan Job Click the [Register new job] button. Operation Flow Register jobs ▼ Select job ▼ Scan document ▼ Output scanned images The [Register new job] dialog box appears. Registering/Editing Jobs Hint In CaptureOnTouch, you can register up to 10 jobs for use with [Select Scan Job]. 1 If you select a registered job and click [Job list/edit], the [Job editing] dialog box appears allowing you to edit the settings of the selected job. Click the [Select Scan Job] tab.
[Button assignment] tab Configure settings to assign the job to a job button on the scanner. If [Assign scanner button 1 to Scan First] is selected in the main screen, assignment to job button 1 is not available. [Output settings] tab Configure settings for the output method. The items that appear in this tab differ depending on the [Output method] selected. [Scanner setting] tab Configure scan conditions. 4 Click the [OK] button.
Selecting Scan Jobs 1 2 4 Place the document in the scanner (See p. 10). Click the [Select Scan Job] tab. The document is scanned. While scanning is in progress, the number of pages scanned is displayed in addition to the scanner settings. When all the pages of the document are scanned, the scanned images are output according to the registered job settings, and the completion screen appears. The main screen for [Select Scan Job] appears. 3 Click the [Start] button. Click a job in the [Job list].
Starting [Select Scan Job] with the Job Buttons Under default settings, jobs are pre-assigned to the second and third job buttons on the scanner. Job button Select Scan Job (Color JPEG iPhoto) Select Scan Job (E-mail Color PDF) When you press job button 2 or 3 after placing your document in the scanner, CaptureOnTouch starts up and scanning begins according to the assigned job settings.
Troubleshooting Problem 4 Common Problems and Solutions Solutions This section provides recommended solutions to common problems. If you have a problem that is not solved by the following, contact your local authorized Canon dealer. Problem 1 Solutions Problem 2 Solutions Problem 3 Solutions The scanner will not turn on. (1) Confirm that the power switch is set correctly. (2) Confirm that the AC adapter is plugged firmly into a power outlet.
Problem 8 Scanned images are saved in TIFF instead of JPEG format. Solutions When the scanner driver’s [Mode] setting is [Auto Color Detection], documents detected as black and white (binary) are automatically saved as TIFF images, regardless of document settings. This occurs because JPEG format does not support black and white binary format images. If you want to save all images in JPEG format, change the scanning [Mode] to either [Color] or [256-level Gray].
2 4 Press the OPEN knob from both sides (a), and pull the front unit out and downward to open it (b). Close the front unit by gently pushing it up on both sides until clicks into place. Make sure that the front unit is completely closed by pushing until you hear a click. b a 3 After removing the jammed paper, check to see if the last page was scanned correctly, and then continue scanning. Remove the jammed document from the document feeding side or document ejecting side.
Appendix Hint Replacing Consumables Replaceable consumables are located as shown below. The scanner's Feed Roller and the Retard Roller are both consumables. They are subject to gradual wear during scanning. As the rollers wear, documents will eventually no longer feed properly, and paper jams will result. When the Roller Count (the total number of document sheets fed through the rollers) reaches 100,000, a message appears upon computer startup requesting roller replacement.
Replacing the Feed Roller 1 2 3 4 Spread the document guides all the way to the left and right, and open the roller cover. 5 Lift the roller fixing lever, and slide it to the left. Slide the roller fixing lever to the right so that it fits into the hole at the left side of the roller, and press the lever down to secure the feed roller shaft. Close the roller cover firmly until the latch clicks. Replacing the Retard Roller and Document Holding Guide Remove the feed roller and install a new one.
2 3 4 5 Lift the roller fixing lever, and slide it to the right. 6 Slide the retard roller to the right to disconnect the shaft, and insert the new roller. At this time, ensure that the notched end of the roller shaft mates with the shaft in the Front Unit. 7 Slide the roller fixing lever to the left so that it fits into the hole at the left side of the retard roller, and press the lever down to secure the roller shaft. 28 Pull the document holding guide down and forward.
Resetting the Counter 1 8 Click [Maintenance]. The [Maintenance] dialog box appears. Start Image Capture. To start Image Capture, click the hard disk icon (e.g. [Macintosh HD]), the [Applications] folder, and then the [Image Capture] icon. 2 3 4 5 6 Click [Browse Devices] in the [Devices] menu. Select the scanner you want to use, and select the [Use TWAIN software] check box. Click [OK]. Click [DR-2510M TWAIN] in the [Devices] menu. 9 Click [Reset]. 10 Click to close the dialog box. Click [Scan].
Scanning Speed (Conditions: Core 2 Duo 2.4 GHz CPU, 1 GB memory, LTR/A4 document size) Black and White Simplex 200 x 200 dpi 25 pages/min.(DR-2510M), 20 pages/min.(DR-2010M) 300 x 300 dpi 25 pages/min.(DR-2510M), 20 pages/min.(DR-2010M) Duplex 200 x 200 dpi 50 images/min.(DR-2510M), 40 images/min.(DR-2010M) 300 x 300 dpi 50 images/min.(DR-2510M), 40 images/min.(DR-2010M) Grayscale Simplex 200 x 200 dpi 25 pages/min.(DR-2510M), 20 pages/min.(DR-2010M) 300 x 300 dpi 25 pages/min.(DR-2510M), 20 pages/min.
Power Supply (using AC adapter) DC 16 V, 1.0 A Power Consumption Scanning: Maximum 16 W In the Sleep mode: Maximum 1.8 W (AC 220-240 V: 1.9 W) With power switch OFF: Maximum 0.5 W Noise Not more than 66 dB Operating Environment Temperature: 10°C to 32.5°C (50°F to 90.5°F) Humidity: 20% to 80% RH Input Output Weight AC 100 to 240 V, 50/60 Hz, 65 VA to 82 VA DC 16 V, 1.8 A Approximately 0.
CANON ELECTRONICS INC. 1248, SHIMOKAGEMORI, CHICHIBU-SHI, SAITAMA 369-1892, JAPAN CANON U.S.A. INC. ONE CANON PLAZA, LAKE SUCCESS, N.Y. 11042, U.S.A. CANON CANADA INC. 6390 DIXIE ROAD, MISSISSAUGA, ONTARIO L5T 1P7, CANADA CANON EUROPA N.V. BOVENKERKERWEG 59-61, P.O.BOX 2262, 1180 EG AMSTELVEEN, THE NETHERLANDS CANON LATIN AMERICA, INC. 703 WATERFORD WAY, SUITE 400 MIAMI, FLORIDA 33126, U.S.A. CANON AUSTRALIA PTY. LTD. 1 THOMAS HOLT DRIVE, NORTH RYDE, SYDNEY. N.S.W, 2113. AUSTRALIA CANON SINGAPORE PTE. LTD.
