Owner's Manual

FLATBED
▲
■ How to use the flatbed
First, raise the feeder. Documents are to be placed on the platen glass
with the scanning side face down. The corner of the document should be
aligned with the upper left corner of the platen glass. When you lower the
feeder, do this slowly and carefully.
■ Scanning a book or thick document
When scanning thick documents or books, either leave the feeder raised
or operate the feeder as shown below.
A. Raise the feeder. While pressing on the bottom of the feeder (1), pull
the feeder down and forward (2).
B. Set the thick document or book on the platen glass and hold the feeder
lightly while scanning.
C. To return the feeder to its original position, raise it all the way (1) and
then close it slowly and carefully (2).
3
SCANNING BASICS
1
(2)
(1)
(1)
(2)
AB C
Book or Thick Document
1.96"(50 mm)