Owner's Manual

SCAN SETTINGS

The DR-7080C is operated via the bundled ISIS/TWAIN driver, which

is compatible with a wide range of application software. Prior to

scanning, use the ISIS/TWAIN driver to select the scanning side,

feeding option, and any other setting you require.

▲

SCANNING BASICS

■ Standard:

Select this mode when you wish to use your application software to

start or stop scanning.

■ Panel:

Select this mode if you need to continuously scan multiple batches or

scan a book page by page. In this mode, scanning starts by pressing

the scanner’s built-in [Start] key.

■ Automatic:

For feeder use only. Select this mode to scan batches of documents

with the feeder. The scanner will start automatically when it detects a

document in the document feeder tray.

Feeding Option

Scanning Side

SCANNING SIDE

▲

FEEDING OPTION

▲

■ For feeder scanning: Select [Simplex] or [Duplex].

■ For flatbed scanning: Select [Flatbed].