Owner's Manual

6
P ANEL FEEDING
SCANNING BASICS
1
STEP
1
Set [Scanning Side] and [Feeding Option] in the ISIS/TWAIN driver.
▲
STEP
2
From the application you are using, execute the required command to
start scanning. The [Start] key lamp will turn green.
▲
STEP
3
Place the document on the scanner.
▲
STEP
4
Press the [Start] key.
▲
STEP
5
When scanning of the document is complete, the scanner goes into
Ready Mode. If you wish to scan another document, repeat steps 3
and 4.
To finish scanning, press the [Stop] key.
▲