User Manual • Please read this manual before operating this scanner. • After you finish reading this manual, store it in a safe place for future reference.
■ ENERGY STAR® Office Equipment Program • Intel and Pentium are registered trademarks of Intel Corporation. • imageFORMULA is a trademark of CANON ELECTRONICS INC. • Other product and company names herein may be the trademarks of their respective owners. This program is for U.S.A and Canada. As an ENERGY STAR® Partner, CANON ELECTRONICS INC. has determined that this machine meets the ENERGY STAR® Program guidelines for energy efficiency.
■ Disclaimers is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Use of shielded cable is required to comply with Class B limits in Subpart B of Part 15 of FCC Rules.
Table of Contents Setup Guide ......................................................................... 5 Preface ................................................................................. 7 Symbols Used in This Manual..................................................... 7 Important Safety Instructions............................................. 8 Installation Location .................................................................... 8 AC Adapter..................................................
Setup Guide Please read first. Checking the Accessories Removing the Protective Material If any of the items listed below are missing or damaged, contact your local authorized Canon dealer or service representative. Remove the orange adhesives and protective material (indicated by ▼ below) from the flatbed. Flatbed Scanner Unit 102 Installing the Software ● Log on to Windows as an Administrator. ● Close all other applications. ● Install the driver for the Canon document scanner beforehand.
Connecting to the Computer and Power Supply Turning the Power ON Turn ON the flatbed first, and then turn ON the Canon document scanner. Power button When connecting to the ScanFront 400 This completes the setup. • Use the USB cables supplied with each scanner. • Do not connect scanners other than the Canon document scanner that will be used in conjunction with the flatbed to the computer, regardless of whether they are compatible with the flatbed.
Preface Windows 10 Thank you for purchasing the Canon imageFORMULA Flatbed Scanner Unit 102. Please read this manual thoroughly before using the scanner to familiarize yourself with its capabilities, and to make the most of its many functions. After reading this manual, store it in a safe place for future reference. NOTE An electronic version of this manual is installed to the following location as a PDF (Portable Document Format) file during software installation from the setup disc.
Important Safety Instructions ● Avoid exposing the flatbed to rapid changes in temperature. If the room in which the flatbed is installed is cold but rapidly heated, water droplets (condensation) may form inside the flatbed. This may result in a noticeable degradation in scanning quality. The following conditions are recommended for optimal scanning quality: Room temperature: 10°C to 32.5°C (50°F to 90.
■ Never disassemble or modify the AC adapter, as this is dangerous. ■ Do not use flammable sprays near the flatbed. ■ When cleaning the flatbed, turn the power switch OFF and disconnect the power cord from the power supply. ■ Clean the flatbed using a slightly dampened cloth that has been well wrung out. Never use alcohol, benzene, paint thinner, or any other flammable substances.
■ Do not place objects on the flatbed. The objects may fall over or off of the flatbed, resulting in personal injury. ■ Connect the AC adapter only to a power outlet of the rated voltage and power supply frequency (120 V, 60 Hz or 220-240 V, 50/60 Hz depending on your region). ■ When unplugging the power cord, grasp it firmly by its power plug. Do not pull directly on the power cord, as this may damage or expose the cord’s internal wiring, resulting in a fire or electric shock.
Names and Functions of Parts A Document Cover Close this to keep documents in place while scanning. B Scanning Glass C Power Button Press this to turn ON the flatbed. The power button lights when the flatbed is turned ON. To turn the flatbed OFF, press and hold the power button until it turns OFF. NOTE The auto power OFF setting, which automatically turns the flatbed OFF if it is not operated for 4 hours, is enabled under default conditions.
Documents • Make sure to straighten wrinkled or curled documents before placing them on the flatbed, and gently press down on the document cover while scanning is in progress. The flatbed can scan documents up to 216 mm (8.5") in width and 356 mm (14.0") in length. Placing Documents Open the document cover, and place the document on the scanning glass, as shown below, with the scanning side facing down.
Scanning Methods Canon document scanner is turned OFF, you cannot scan documents using the flatbed. However, you can scan documents using the Canon document scanner while it is turned ON, even if the flatbed is turned OFF. • When the conditions for scanning require a large amount of the computer’s memory, scanning may not be possible if the memory is insufficient. If a memory error appears during scanning, exit the application and change the scanning conditions before attempting to scan again.
Functions Custom color drop-out Custom color Enhance Moire Reduction Character Emphasis Background smoothing Use on the flatbed No No Yes Yes Yes Functions Back-side settings (when MultiStream is enabled) Barcode 2D code Imprinter Addon Use on the flatbed No Yes Yes No No (Yes: Supported, No: Not supported) 14
Scanning with CapturePerfect You can use the CapturePerfect software provided with the connected Canon document scanner to specify the scanning conditions and saving options before scanning. The following describes how to scan documents with CapturePerfect using the [Scan Batch to File] setting. When you use this scanning method, documents that are scanned one sheet at a time on the flatbed are saved to the same image file. This section describes the scanning procedure in CapturePerfect 3.1.
6 8 Click [Scanner Setting], and configure the scanner settings. Configure the Canon document scanner’s settings if necessary. Click the [More] button to open the settings dialog box for the Canon document scanner. When you finish configuring settings, click [OK] to close the dialog box. For details on each setting, refer to the Help. The properties dialog box for the scanner driver appears. 9 Configure the scanning conditions. For details on settings, p. 17.
Scanner Settings 12 When the [Continue Scanning] dialog box appears, and When you open the settings dialog box for your scanner while the flatbed is connected, you can configure scan conditions with the following settings. click [Continue Scanning] or [Cancel Scan]. 13 When scanning is complete, select [Exit] from the [File] menu to exit CapturePerfect. [User Preference] Enter a name and click [Save]. You can recall the name and its configurations in the settings dialog box, whenever necessary.
[Page Size] Select the page size of the document to be scanned. If you select [Match original size], the document size is detected automatically. The [Settings] button is enabled in such cases, and by clicking the button and displaying the dialog box, you can configure the size detection area (legal, A4, or A5R area) according to the document to be scanned. [Dots per inch] Specify the scanning resolution. [Brightness] Adjust the brightness of scanned images.
Other Methods for Scanning This section describes the various scanning options. Changing the Feeding Option for Scanning Changing the feeding option setting in the scanner settings dialog box can be helpful when scanning multipage documents. The following three feeding options are available: ● [Standard Feeding] This is the standard feeding method. The scanning operation ends when the documents placed in either scanner finish scanning.
4 10 Place the next document to be scanned. Click the [Feeding] tab. If you selected [Auto] for [Main Scanner/Flatbed] in step 2, you can place the document in either the feeder or the flatbed to continue scanning. 11 Repeat steps 9 and 10 until all documents are scanned. 12 Press the stop button on the scanner when all documents have been scanned. This completes the scan procedure.
Using Two Scanners Setting [Main Scanner/Flatbed] to [Auto] in the scanner settings dialog box makes it easy to scan certain types of documents with one scanner or the other, or scan using a combination both scanners. Example 1: Scan using the appropriate scanner for each scan operation By configuring the following settings, you can scan documents suited for the flatbed (e.g., a single page of a book) or documents suited for the connected Canon document scanner (e.g.
Troubleshooting Problem 4 Text is not enhanced in scanned images, even though [Text Enhanced Mode] is specified. Common Problems and Solutions This section provides recommended solutions to common problems. If you have a problem that is not solved by the following, contact your local authorized Canon dealer. Solution Problem 1 The flatbed will not turn ON. Solution Confirm that the AC adapter is plugged firmly into a power outlet. Problem 2 The flatbed is not recognized.
Appendix Cleaning the Scanning Glass and Pressure Board Routine Cleaning Clean the flatbed on a regular basis to maintain scanning performance. If dirt appears in scanned images, or if scanned documents become dirty, the scanning glass and pressure board may be dirty. Be sure to clean them regularly. WARNING 1 For safety, always turn the power switch OFF and disconnect the power cord from the power outlet before cleaning the flatbed. Do not use spray-type cleaners to clean the flatbed.
3 Auto Power OFF Setting If scanning or any other operation is not performed on the flatbed for 4 hours, the flatbed will automatically turn OFF. To disable this setting, perform the following. 1 Disable the [Turn off automatically after 4 hours] check box. Open the scanner settings dialog box from your application. When using CapturePerfect, for example, select [Scanner Setting] from the [Scan] menu.
Specifications Operating Environment Temperature: 10°C to 32.5°C (50°F to 90.5°F) Humidity: 20% to 80% RH Main Unit AC Adapter (100 to 240 V type) Type Desktop flatbed Scanning Document Size Width: 216 mm (8.
64 mm (2.52") External Dimensions Diagram 481 mm (18.94") 267 mm (10.51") 466 mm (18.35") 504 mm (19.
Safety-related markings on the machine Marquages de sécurité sur la machine Marcature di sicurezza sulla macchina Sicherheitshinweise auf der Maschine Marcas de la máquina relacionadas con la seguridad Veiligheidsmarkeringen op de machine Makine üzerindeki güvenlik i㶆aretleri [English] [Français] [Italiano] [Deutsch] [Español] [Nederlands] [Türkçe] Switch (On) Commutateur (Marche) Interruttore (On) Schalter (Ein) Interruptor (encendido) Schakelaar (On) Anahtar (Açık) Power on Sous tension Alimentazione pr
[English] [Français] Switch (Push-On/Push-Off) Commutateur (Appuyer pour mettre en marche/Appuyer pour arrêter) Power on/off (no standby current) Sous/hors tension (pas de courant de veille) [Italiano] Interruttore a pulsante bistabile (On/Off) Alimentazione on/off (nessuna corrente di standby) [Deutsch] Schalter (Ein- und Ausschalten durch Drücken) Ein- und Ausschalten (ohne Ruhestromaufnahme) [Español] Interruptor (pulsado para encendido/apagado) Encendido/apagado (sin corriente en espera) [Ne
[English] [Français] [Italiano] [Deutsch] [Español] [Nederlands] [Türkçe] DC symbol Symbole CC Simbolo corrente continua (C.C.) Gleichstrom-Symbol Símbolo CC DC-pictogram DC sembolü Indicates direct current Indique qu’il s’agit de courant continu Indica la corrente continua Kennzeichnet Gleichstrom Indica corriente continua Geeft gelijkstroom aan Düz akımı gösterir [English] [Français] [Italiano] [Deutsch] [Español] [Nederlands] [Türkçe] DC polarity Polarité CC Polarità C.C.
CANON ELECTRONICS INC. 3-5-10, Shibakoen, Minato-ku,Tokyo 105-0011, Japan CANON U.S.A. INC. ONE CANON PARK, MELVILLE, NY 11747, U.S.A. CANON CANADA INC. 8000 Mississauga Road Brampton, Ontario L6Y 5Z7, CANADA CANON EUROPA N.V. BOVENKERKERWEG 59, 1185 XB AMSTELVEEN, THE NETHERLANDS CANON AUSTRALIA PTY. LTD. BUILDING A, THE PARK ESTATE, 5 TALAVERA ROAD, MACQUARIE PARK, NSW 2113, AUSTRALIA CANON SINGAPORE PTE. LTD. 1 FUSIONOPOLIS PLACE, #15-10, GALAXIS, SINGAPORE 138522 CANON INDIA PVT.