Instruction Guide
Table Of Contents
- ScanFront300/300P INSTRUCTIONS
- Introduction
- Table of Contents
- Chapter 1 Before Use
- Chapter 2 Handling
- Chapter 3 ScanFront Setup
- Chapter 4 ScanFront Service
- Chapter 5 Operating Procedures
- Chapter 6 Web Menu (Administrator Mode)
- Chapter 7 ScanFront Administration Tool
- Chapter 8 Web Menu (User Mode)
- Chapter 9 Maintenance
- Chapter 10 Troubleshooting
- Chapter 11 Appendices
6-17
Chapter 6 Web Menu (Administrator Mode)
IMPORTANT
• If the computer containing the publicly shared folder is part of
a domain, enter the user name and password registered with
the domain, and the domain name.
• If the computer containing the publicly shared folder is not part
of a domain, there is no need to enter a [Domain/Workgroup].
Save Password
Select this check box to save the password to the address.
IMPORTANT
If you do not save the password, password entry will be required
each time you send.
[OK] button
Registers a new shared folder with the specified
parameters.
Address type: Fax
This option registers a fax destination.
Fax number
Enter the fax number of the destination.
[OK] button
Registers a new fax destination with the specified
parameters.
Address type: Group
This option registers several registered addresses together
as a group.
Hint
Different types of address, such as e-mail addresses and
shared folders, can be registered as a group, and up to 99
addresses can be registered to 1 group.
Name
Enter the name to display on the scanner.
Add from Address Book
Allows you to select an address from an address book, add
it to the group, and display it in the list.
[OK] button
Registers a new group with the specified parameters.