Instruction Guide
Table Of Contents
- ScanFront300/300P INSTRUCTIONS
- Introduction
- Table of Contents
- Chapter 1 Before Use
- Chapter 2 Handling
- Chapter 3 ScanFront Setup
- Chapter 4 ScanFront Service
- Chapter 5 Operating Procedures
- Chapter 6 Web Menu (Administrator Mode)
- Chapter 7 ScanFront Administration Tool
- Chapter 8 Web Menu (User Mode)
- Chapter 9 Maintenance
- Chapter 10 Troubleshooting
- Chapter 11 Appendices
![](/manual/canon/imageformula-scanfront-300/instruction-guide-english/images/img-126.png)
6-40
Chapter 6 Web Menu (Administrator Mode)
Restore All Settings
This option restores backed up data to the scanner.
1. Confirm that no administrator or user is logged in to
the scanner.
Hint
If a user or administrator is logged in to the scanner, an error will
occur when the restoration is performed.
2. Click [Browse], and specify the backup data to use.
3. Click [Restore].
4. Confirm the message that appears, and click [OK] to
perform the restoration.
5. Click [OK] to complete the restoration.
6. Confirm the restored settings.
❏ Module Version Information/Update
You can display the version information, and update the
version, of the module in use on the scanner.
IMPORTANT
If the scanner malfunctions, the version information is required
when contacting support services.
Acquiring Update Files
For details on acquiring the update files needed to update
the scanner, consult your dealer or a Canon service
representative.