Instruction Guide
Table Of Contents
- ScanFront300/300P INSTRUCTIONS
- Introduction
- Table of Contents
- Chapter 1 Before Use
- Chapter 2 Handling
- Chapter 3 ScanFront Setup
- Chapter 4 ScanFront Service
- Chapter 5 Operating Procedures
- Chapter 6 Web Menu (Administrator Mode)
- Chapter 7 ScanFront Administration Tool
- Chapter 8 Web Menu (User Mode)
- Chapter 9 Maintenance
- Chapter 10 Troubleshooting
- Chapter 11 Appendices
8-2
Chapter 8 Web Menu (User Mode)
1. Web Menu Overview
The Web Menu function enables you to access and configure the scanner from the Web browser of a remote computer. From the
Web Menu, you can register address books and job buttons.
IMPORTANT
• For a Web browser, use Microsoft Internet Explorer 6.0 or later or Firefox 3.5 or later.
• In some cases, settings cannot be changed from the Web Menu when the ScanFront administrator or another user is logged in to the scanner.
• Use the device name or IP address assigned to the scanner as the URL for logging in to the Web Menu. (See p. 8-3.)
• When you open the Web Menu using Internet Explorer 7 or later, an SSL-certificate warning will appear. However, you can proceed and open
the Web Menu safely.
Web Menu (User Mode)
a User Settings (See “User Settings” on p. 8-5)
Use to change the user settings.
b Address Book Settings (See “Address Book Settings”
on p. 8-8)
Use to register and manage entries in the Shared Address
Book available to all users, and the My Address Book
provided for each user.
c Job Button Settings (See “Job Button Settings” on
p. 8-15)
Use to register and manage the Shared Job Button
available to all users, and the My Job Button provided for
each user.
Settings
ScanFront 300
Network
Computer (Web Menu)
a
b
c