Instruction Guide
Table Of Contents
- ScanFront300/300P INSTRUCTIONS
- Introduction
- Table of Contents
- Chapter 1 Before Use
- Chapter 2 Handling
- Chapter 3 ScanFront Setup
- Chapter 4 ScanFront Service
- Chapter 5 Operating Procedures
- Chapter 6 Web Menu (Administrator Mode)
- Chapter 7 ScanFront Administration Tool
- Chapter 8 Web Menu (User Mode)
- Chapter 9 Maintenance
- Chapter 10 Troubleshooting
- Chapter 11 Appendices
5-21
Chapter 5 Operating Procedures
9. Press [Send].
The address confirmation message appears.
IMPORTANT
If [Confirm addresses before sending] is set to [OFF] in Delivery
Options of the Scan/Delivery Options screen, the image is sent
without displaying the address confirmation screen and the
operation ends.
10.
Confirm the address and press [OK] to send the
scanned image.
IMPORTANT
If a send error message appears, check the address settings
and send destination and try again.
11.
Returns to the screen set for [Screen after sending]
in Delivery Options of the Scan/Delivery Options
screen.