Instruction Manual (pdf)

135
Chapter 5 Administrator Settings
SNMP Agent
Enter the installation location of the SNMP agent.
SNMP Community Settings
Displays the communities to which the SNMP hosts that
are allowed to send SNMP requests to the SNMP agent
belong.
To register a community for which SNMP requests are
allowed, press [Edit] - [New], and configure the
community name, receiving host, and community
privileges.
• Receive host settings
When [All hosts] is selected, packets from all SNMP
hosts that belong to the community registered under
[SNMP Community Settings] will be accepted.
• Receive host list
When [Listed hosts] is selected for [Receive host
settings], enter the IP address of the host from which to
accept SNMP packets.
Hint
To change the registered community setting, select the
community in the [SNMP Settings] screen, press [Edit] -
[Modify], and change the setting in the [Modify] screen.