Instruction Manual (pdf)

151

Chapter 5 Administrator Settings

11.

Device Operation Screen

You can configure the display off setting, reset the roller counter, and configure the password.

The Device Operation screen can be displayed from the Device Configuration screen of the Administrator Settings. (See p. 131.)

a Device detail settings

Configure the display off setting, configure the low power

mode setting, and adjust the compression ratio of the

scanner driver.

b Roller counter reset

Reset the counter after replacing the feed roller when the

scanner no longer feeds properly. (See “2. Replacing the

Rollers” – “Checking the Page Count and Resetting the

Counter” on p. 185.)

c Password setting

Set the password for restricting the display of the

ScanFront maintenance screen. (See “Setting a Password”

on p. 153.)

d To the Web application mode

Switch to Web Application Mode. Use this function when

using the scanner in conjunction with an external Web

Application Server.

IMPORTANT

Do not use this button to switch the scanner to Web Application

Mode when using the scanner as a standalone unit. If you want

to switch to Web Application Mode and use the scanner in that

mode, contact your dealer.

e IEEE802.1X setting

Configure these settings when using IEEE802.1X

authentication for network connections. (See

“IEEE802.1X setting” on p. 153.)