Instruction Manual (pdf)

154
Chapter 5 Administrator Settings
•CA Certificate
When either [EAP-TLS] or [PEAP] is selected, import
the CA certificate used for authentication.
Save the CA certificate file (ca_cert.cer) to the root
directory of the USB memory device, and press [Import]
after connecting it to the scanner to import the certificate
file. To update a CA certificate file, press [Delete] to
delete the registered certificate file, and import the new
file.
• Client Certificate
When [EAP-TLS] is selected, import the client
certificate used for authentication.
Save the client certificate file (cli_cert.pfx) to the root
directory of the USB memory device, and press [Import]
after connecting it to the scanner to import the certificate
file. To update a client certificate file, press [Delete] to
delete the registered certificate file, and import the new
file.
• TTLS internal protocol
When [EAP-TTLS] is selected, specify the internal
protocol (MSCHAPv2 or PAP) to be used.
❏ Accessing from an External Terminal’s
Web Browser
You can access the ScanFront from an external terminal's
web browser to register users, addresses, and jobs,
configure device settings, and perform other operations.
1. Set [Allow remote operation] to [ON]. (See p. 152.)
2. Start the web browser on the external terminal.
3. Enter the following URL to access the ScanFront.
http://xxx.xxx.xxx.xxx:50080/
* Enter the ScanFront's IP address for "xxx.xxx.xxx.xxx".
Hint
• When communicating by SSL,
enter "https://xxx.xxx.xxx.xxx:50443/".
• When using SSL communication, be sure to import the proper
server certificate using ScanFront Administration Tool for
SF400 (see p. 174). Depending on the web browser
operation, failure to import the certificate may result in
improper menu functioning.
The ScanFront login screen appears.
IMPORTANT
If an external terminal enters sleep mode while access to the
ScanFront is in progress, a false notification indicating that
scanning is in progress may be sent. Before entering sleep
mode or stepping away while automatic sleep mode is enabled
on an external terminal, be sure to close the web browser that
is accessing the ScanFront.