Instruction Manual (pdf)

170
Chapter 7 ScanFront Administration Tool for SF400
4. Managing the ScanFront Scanners
You can change administrator passwords and device passwords, check connections, and manage users for ScanFront scanners
registered in ScanFront Administration Tool for SF400.
❏ Selecting a ScanFront
To manage a ScanFront scanner with ScanFront
Administration Tool for SF400, select it in the ScanFront
Administration Tool for SF400 list. Selecting a check box
at the far left of each row in the list selects the
corresponding ScanFront.
If you click [Select All], all of the ScanFront scanners in
the list will be selected. If you select [Except All], all of the
selections in the list will be cleared.
❏ Checking ScanFront Status
After selecting a ScanFront scanner in the list, click the
[Check the Connection] button to display the connection
status and information about the selected ScanFront, as
described below.
[Status]
When properly connected, “Connection Possible” is
displayed.
[Roller counter]
This shows the number of document pages fed since the
roller was last replaced and the counter reset.
[Total pages scanned]
This shows the total number of documents scanned.