Instruction Manual (pdf)

172
Chapter 7 ScanFront Administration Tool for SF400
❏ Changing IP Addresses or Device
Names
Double-click a ScanFront scanner in the list to display the
[IP Address / Device Name] dialog box, and then change
the IP address or device name of the selected ScanFront.
After you enter the IP address or device name and click
[OK], the dialog box will close, and the specified IP
address or device name will be applied.
❏ Checking Detailed Information on the
ScanFront
Click the [Check Details] button that appears for the
ScanFront scanners registered in the list to display the
[Details] window.
IMPORTANT
You can only perform this operation for ScanFront scanners to
which ScanFront Administration Tool for SF400 is able to
connect.
Hint
The [Check Details] button is not available in Web application
mode.
A list of users registered to the ScanFront appears in the
[Details] window.
You can use the following buttons in the window to
manage the users registered to the ScanFront.
• To select a user for an operation, select the check box that
appears at the far left of each row. Clicking [Select All]
or [Except All] selects or clears all of the user check
boxes in the list, respectively.
• Click [Back up] to back up configuration data for users
selected in the list to any location on the computer.
• Click [Delete] to delete the users selected in the list.
• You can display ScanFront version information and the
number of counter sheets by clicking [Version Info].
• Click [Close] to close the [Details] window.