Guide for Mac
Using the Faxmonitor
4-30
Special Fax Driver Options
4
Printer Menu
The following commands are available on the [Printer] menu of the Faxmonitor.
NOTE
•
After changing the printer configuration, for example by adding an optional fax board,
make sure that you select [Get Printer Information] from the [Printer] menu, or click
[Printer Info] or [Device Settings], in the [Print] dialog box accessed from the application
software in which you created a document, to configure the fax settings. Failing to follow
this procedure may result in unacceptable printout.
•
To monitor the printer status using the Faxmonitor, you need to register the printers with
the Printer Setup Utility (for Mac OS X 10.3 or later) or the Print Center (for Mac OS X
10.2.8). Then, select the printers in the [Print] dialog box accessed from application
software in which you created documents.
•
Depending on the printer model you are using, [Get Printer Information] may not be
available when connected via USB.
[Printer Name]:
Displays the printers whose status you can monitor. If more than
one is available, select the printer whose status you want to
monitor.
[Search for Printer]:
If the printer you want is not displayed on the [Printer] menu, it
can be searched by selecting [Search for Printer].
[Get Printer Information]: Displays the [Printer Info] dialog box.
[Make Default]:
Registers the currently selected printer the next time the
Faxmonitor starts.