Specification Sheet
1008-iPPP-PDF-IS
CANON and IMAGEPRESS are registered trademarks of Canon Inc. in the United States and may
also be registered trademarks or trademarks in other countries. IMAGEANYWARE is a trademark
of Canon. All other referenced product names and marks are trademarks of their respective
owners and are hereby acknowledged.
Specifications and availability subject to change without notice.
©2008 Canon U.S.A., Inc. All rights reserved.
Professional Puncher-B1
Paper Type to be Punched
Max. Size (W x L): 11.69" x 8.5" (297mm x 215.9mm)
Min. Size (W x L): 11" x 8.27" ( 279.4mm x 210mm)
Weight: 20 lb. Bond - 80 lb. Cover (75 gsm-
216gsm)
(LTR, Tab Paper)
R a nge of available paper weight
will be changed with paper type
and die type.
Paper Type to be Through
Max. Size (W x L): 13" x 19.2" (330.2mm x 487.7mm)
Min. Size (W x L): 5.5" x 7.17" (139.7mm x 182mm)
Weight: 64 g/m
2
-300 g/m
2
(LDR-R, LGLR, LTR, EXE, LTR-R,
STMT-R, EXER, Tab Paper, 12” x 18”,
13” x 19”, Custom Paper Size)
Chip Tray Capacity
Capacity: 25,000 Sheets of 20 lb. Bond
with three holes
Full Detection: 25,000 Sheets of 20 lb. Bond
with three holes
(Detection with sensor)
Size: 22" x 31.5" x 40.9"
(5 55mm x 800mm x 1040mm)
Weight: Approx. 178 lb. (80Kg)
Die Set: Loose Leaf 3-Hole
Loose Leaf 5-Hole
Velo Bind 11-Hole
Plastic Comb 19-Hole
Twin Loop 21-H ol e/32-Hole
ProClick 32-Hole
Color Coil 44-Hole
Die Life: 500,000 Impressions or More
(20 lb.Bond/80gsm)
Power Supply Specification: 120V, 60Hz
Power Consumption
Operating State: 310W or Less
(Max. Power Consumption)
Standby State: 20W or Less
**Includes Professional Puncher Integration Unit-A1.
printed on recycled
paper in the u.s.a.
Specifications
Sh o r t e n t u r n a r o u n d t i m e w i t h m o r e
i n -l i n e f i n i S h i n g c a p a b i l i t i e S o n y o u r
image
preSS
®
d i g i t a l p r e S S .
The introduction of the Professional Puncher-B1 enhances the capabilities of
your imagePRESS digital press by offering an in-line alternative for finishing jobs.
The on-demand marketplace is changing–quality expectations are increasing
while turnaround time is decreasing.
There’s an additional opportunity for revenue that can be realized with value-added
services, such as in-line finishing. The Professional Puncher-B1 installs seamlessly
with the Professional Puncher Integration Unit-A1 to enable hole-punching of eight
common die patterns, including plastic comb, twin loop wire, and ProClick.
The unique capabilities of this finishing
accessory, such as die set recognition,
chip tray full detection, and the ability
to handle tabs will allow your business
to produce and finish a greater variety
of jobs in-line, without operator interven-
tion. By shortening the time it takes to
produce and finish the job in-house,
you can meet the tightest deadlines
requested by your customers.
Available on a majority of the imagePRESS digital presses, this accessory
eliminates the need for costly off-line finishing equipment and offers a solution
to grow your business.
The Professional Puncher-B1 will help you enhance internal productivity and
the competitiveness of your production printing business with imagePRESS
finishing solutions.
Illustration of Die Patterns
*Photo includes the Professional Puncher-B1 with the Professional Puncher Integration Unit-A1.
1-800-OK-CANON
www.usa.canon.com
Canon U.S.A., Inc.
One Canon Plaza
Lake Success, NY 11042