Quick Guide Read this guide first. Please read this guide before operating this product. After you finish reading the guide, store it in a safe place for future reference.
imagePRESS C800/C700/C60 Practical Features Auto Gradation Adjustment for Various Paper Types The Auto Adjust Gradation function adjusts the gradation, density, and color tone of images, and only requires you to scan the test page. This function can be used for various weights of paper so that a high quality print result can be obtained in different paper types.
Easy Operation for Adjusting Image Position You can adjust the image positions easily with this machine. All you need is measuring marks on the test page and then entering the measured values on the touch panel display. After that, the machine will automatically adjust the image positions. You can make the complicated adjustment easily by entering values for each edge of front and back sides on a single screen.
Contents Thank you for purchasing this Canon product. Please read this manual thoroughly before operating the machine to familiarize yourself with its capabilities, and to make the most of its many functions. For more information on the detailed settings for the functions, see the e-Manual. After reading this manual, store it in a safe place for future reference. Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . 6 Cleaning and Maintenance . . . . . . . . . . . . . . . . . . . . . . .
Keys and Buttons Used in This Manual The followings are examples of how keys and buttons are expressed in this manual.
Important Safety Instructions These "Important Safety Instructions" are intended to prevent injury to user or other persons or destruction of property. Please read these instructions thoroughly before operating the machine. Also, since it may result in unexpected accidents or injuries, do not perform any operation unless otherwise specified in the manual.
Important Safety Instructions IMPORTANT Do not install the machine in the following locations • A location subject to rapid changes in temperature and humidity • A location near equipment that generates magnetic waves or electromagnetic waves It is recommended that the room be appropriately ventilated, sufficient to maintain a comfortable working environment, in areas of machine operation. In addition, do not install this machine where it exhausts directly onto a person.
▀ Power Supply Plug the machine into an outlet that is 208 V AC 20 A or greater. WARNING • Do not use power supplies with voltages other than those specified herein, as this may result in a fire or electrical shock. • Do not use power cords other than the provided power cord, as this may result in a fire or electrical shock. • The provided power cord is intended for use with this machine. Do not connect the power cord to other devices. • Do not damage, modify, pull on, or excessively bend the power cord.
Important Safety Instructions ▀ Handling WARNING • If the machine makes strange noises, or gives off smoke, heat, or strange smells, immediately turn OFF the main power switch, and disconnect the power cord from the power outlet. Then, contact your local authorized Canon dealer. Continued use of the machine in this condition may result in a fire or electrical shock. • Do not attempt to disassemble or modify the machine.
Laser beam The laser beam can be harmful to human bodies. Since radiation emitted inside the product is completely confined within protective housings and external covers, the laser beam cannot escape from the machine during any phase of user operation. Read the following remarks and instructions for safety. • Never open covers other than those instructed in the manuals for this machine.
Important Safety Instructions ▀ Maintenance and Inspections Clean this machine regularly. The machine may not operate properly if dust accumulates. Make sure to read the followings when cleaning the machine. WARNING • When cleaning the machine, first turn OFF the main power switch, then disconnect the power cord. Failure to observe these steps may result in a fire or electrical shock. • Clean the machine using a cloth which is wrung after being damped in water.
▀ Consumables WARNING • If you accidentally spill or scatter toner, carefully wipe up the loose toner with a damp, soft cloth and avoid inhaling any toner dust. Do not use a vacuum cleaner that is not equipped with safety measures to prevent dust explosions to clean up loose toner. Doing so may cause damage to the vacuum cleaner or result in a dust explosion due to static discharge. • Do not burn or throw toner cartridges in open flames. Do not store toner cartridges in places exposed to open flames.
Parts and Their Functions This section provides you with the names and functions of all the parts of the machine. The keys and display on the control panel are also described. Read this section to use the machine’s various functions smoothly. "Optional Products" in the e-Manual ▀ Front View 1 5 1 USB Port (1) Use to connect memory media to the machine via USB. 2 Upright Control Panel-D1 Includes the keys, touch panel display, and indicators required for operating the machine.
▀ Back View 1 2 3 4 5 1 LAN Port Use a LAN cable to connect the machine to a network. 2 USB Port (2) Use the USB port to connect external hard disks and other devices to the machine. 3 USB Connector Use a USB cable to connect the machine to a computer. 14 4 Breaker Detects excess current or leakage current. 5 Test Button Press this button to test the circuit breaker.
Parts and Their Functions ▀ Internal View 1 6 5 2 4 1 Toner Cartridge This cartridge contains toner. Pull out this cartridge when replacing it with a new one. 2 Front Cover Open this cover to clear a paper jam in the fixing transport unit. 3 5 Waste Toner Container Waste toner accumulates in this container. Pull out this container when replacing it with a new one. 6 Left Cover on the Front Side Open this cover to clear a paper jam or to replace the waste toner container.
▀ Control Panel (Upright Control Panel-D1) 1 2 3 4 5 19 18 6 7 17 8 9 16 15 1 Processing/Data Indicator Blinks green when the machine is performing operations, and maintains a steady green light when received data is stored in memory. 2 Error Indicator Blinks or lights if there is an error in the machine. When the Error indicator blinks, follow the instructions that appear on the touch panel display.
Parts and Their Functions 12 Reset key Press to restore the standard settings of the machine. 13 ID (Log In/Out) key Press to log in/out when a login service such as Department ID Management or SSO-H has been set. 14 Touch Panel Display The settings screen for each function is shown on this display. 15 Brightness Adjustment Dial 17 Status Monitor/Cancel key Press to check the status of jobs or to cancel print jobs.
Status Monitor/Cancel Screen If you press , the Status Monitor/Cancel screen appears, and you can confirm the status of jobs and consumables on this screen. By obtaining information, such as the completion time of the current job or the amount of paper remaining, you can perform smooth printing operation without interruption.
How to Turn ON the Main Power This section explains how to turn ON the main power. ▀ Turning ON the Main Power Make sure that the power plug is firmly inserted into the power outlet, and the breaker is turned ON. 1 Open the main power switch cover. 2 Press the main power switch to the "|" side. • The main power indicator on the control panel lights. IMPORTANT If you want to turn ON the main power again, wait for at least 10 seconds after the main power and the main power indicator are turned OFF.
Loading Paper Load paper by following the procedure below. In this section, A4 custom size paper is used as an example. Confirmation Preparation Operation Registration Confirm the paper types that can be loaded. "Available Paper," on p. 20 Register all paper types you are going to use. "Registering Paper Types in the Paper Database," on p. 22 Load paper in the paper drawer. "Loading Paper into the Paper Drawer," on p. 23 Specify the loaded paper size and type for the paper drawer.
Loading Paper Paper Drawer Paper Capacity Upper, middle, and lower decks: 550 sheets (20 lb bond (80 g/m2)) each Paper Type Thin 1 to 2, Plain 1 to 2, Heavy 1 to 4, Color, Recycled, Pre-Punched, Transparency, Clear Film, Tab, Bond, Letterhead, Textured, Vellum, and Envelopes Paper Size 13" x 19", 12 5/8" x 17 11/16", 12" x 18", 11" x 17", LGL, LTR, LTRR, EXEC, STMTR, Custom Size (4" x 5 7/8" to 13" x 19 1/4" (100 mm x 148 mm to 330.2 mm x 487.
▀ Registering Paper Types in the Paper Database Register all paper types you are going to use with this machine. You can register paper types by selecting paper types from the Paper Database. NOTE If you load paper which is already registered in the machine, such as plain or recycled paper, this step is not necessary. Proceed to the next step "Loading Paper into the Paper Drawer". 1 Press 2 Press [Preferences] [Paper Settings] [Paper Type Management Settings]. 3 Press [Paper Database].
Loading Paper ▀ Loading Paper into the Paper Drawer 1 Open the paper drawer. • Gently pull out the paper drawer until it stops. 2 Adjust the position of the paper drawer guides. • Slide each guide while squeezing it on the top to align for the desired paper size. 3 Load the paper stack into the paper drawer. 1 Load the paper stack against the right wall of the paper drawer. 2 Gently push the paper drawer back into the machine until it clicks into place in the closed position.
▀ Selecting Paper Types from the Paper Database Select the loaded paper type from the Paper Database. 1 Press 2 Press [Preferences] [Paper Settings] [Paper Settings]. 3 Select the paper source in which you loaded paper press [Set]. (Settings/Registration). • If you load paper other than standard paper, select [Custom Size] or [Envelope]. 24 4 Select the loaded paper type from the list press [OK].
Cleaning and Maintenance For optimum operation of the machine, we recommend to clean and check the machine regularly. ▀ Cleaning the Platen Glass If originals cannot be scanned properly, follow the cleaning procedure below. Clean with a cloth which is wrung after being dampened in water, and then clean with a soft and dry cloth. Use the provided glass cleaning cloth for simple cleaning. 1 Clean the Platen Glass. • Clean the platen glass and the underside of the feeder.
▀ Cleaning the Feeder If originals which are fed from the feeder become dirty, follow the cleaning procedure below. Clean with a cloth which is wrung after being dampened in water, and then clean with a soft and dry cloth. Use the provided glass cleaning cloth for simple cleaning. 1 Clean the original scanning area. • Open the feeder and clean the original scanning area (thin glass strip). 2 2 1 26 1 2 Open the covers. 1 Pull the lever above the feeder, and open the cover.
Cleaning and Maintenance ▀ Automatic Feeder Cleaning If originals which are fed from the feeder become dirty, follow the procedure below. 1 Place 10 sheets of blank paper into the feeder. • Use LTR plain paper. 2 Press 3 Press [Adjustment/Maintenance] [Maintenance] [Clean Feeder]. 4 Press [Start]. (Settings/Registration). ▀ Cleaning the Inside of the Main Unit If output paper becomes dirty, follow the procedure below.
▀ Refreshing the Fixing Belt If streaks appear on the output paper, or gloss unevenness occurs in the high density area of the printed heavy paper, follow the procedure below. 1 Press 2 Press [Adjustment/Maintenance] [Maintenance] [Refresh Fixing Belt]. 3 Press [Start]. (Settings/Registration). NOTE The fixing belt is refreshed automatically every several sheets of paper is printed. You can adjust the refresh frequency and time in [Fixing Roller Auto Refresh Level].
Cleaning and Maintenance ▀ Inspection of the Breaker This machine has a breaker that detects excess current or leakage current. Make sure to test the breaker once a month by following the procedure below. 1 Turn OFF the main power. • Make sure that the main power is turned OFF, before inspecting the breaker. 2 Push the test button located on the rear of the machine. • Push the test button with the tip of a ball-point pen or a similar object. Briefly push the test button.
Consumables The following consumables are available for this machine. For more information, contact your local authorized Canon dealer. For information on using and storing consumables, see "Consumables," on p. 12. Recommended Paper In addition to plain paper, other types of paper stock are available, such as recycled paper, color paper, transparencies/ clear film (recommended for this machine), vellums, and labels. For high-quality printouts, use paper recommended by Canon.
Consumables Staple Cartridge for the Stapler Unit The Staple-N1/Staple-J1 can be attached to the Finisher-AM1/ Saddle Finisher-AM2/Staple Finisher-T1/Booklet Finisher-T1 for stapling. For information on how to replace the staple cartridge, see the e-Manual.
Troubleshooting This section explains how to solve problems when paper jam occurs frequently or error messages are displayed. For information on the detailed procedures and precautions, see the e-Manual. "Problem Solving" in the e-Manual ▀ Clearing Paper Jams and Staple Jams If a paper jam or staple jam occurs, follow the instructions displayed on the touch panel display to clear the jam. If you press [Close], you can continue operations, such as scanning originals, even if the jammed paper is not removed.
Troubleshooting ▀ When an Error Message Is Displayed If a malfunction occurs and the machine cannot operate normally, a screen shown on the right appears. If the machine cannot operate normally after turning the main power OFF and then ON, contact your local authorized Canon dealer. "Contacting Your Local Authorized Canon Dealer," on p.
▀ Contacting Your Local Authorized Canon Dealer If you cannot operate the machine normally after turning the main power OFF and then ON, contact your local authorized Canon dealer by following the procedure below. 1 Note the error code. • Write down the error code "EXXXXX-XXXX". 2 Turn OFF the main power. • Press the main power switch to the " " side. 34 3 Remove the power plug from the power outlet. 4 Confirm the product name, and contact your local authorized Canon dealer.
Troubleshooting ▀ If Memory Becomes Full If memory becomes full during scanning, the following messages appear on the touch panel display. Follow the procedures on the screen, and then delete unnecessary files stored in the Mail Box and Fax/I-Fax Inbox to make more memory available. Scanning will be canceled because the memory is full. Do you want to print (send, store)* the scanned pages? * A part of the message differs, depending on the function used.
Specifications Specifications are subject to change without notice for product improvement or future release. For more information on the specifications of the following optional equipment, consult the relevant guide.
Specifications Item Specifications First Copy Time Full color imagePRESS C800/C700/C60: 7.7 seconds*1 Black-and-White: imagePRESS C800/C700/C60: 6.9 seconds*2 *1 When "Color Priority" is selected. *2 When "Black & White Priority" is selected.
Item Specifications Paper Feeding System/Capacity Paper Drawer 1, 2, 3: 550 sheets x 3 cassettes (20 lb bond (80 g/m2)) Multiple Copies 1 to 9,999 sheets Power Source 208 V AC, 60 Hz, 20 A Power Consumption Maximum Power Consumption: 3,520 W or less Power Consumption: When in the Sleep mode: 1 Wh When the main power switch is turned OFF: [Quick Startup Settings for Main Power] is set to 'OFF' : 0.5 Wh [Quick Startup Settings for Main Power] is set to 'ON' : 1.
Specifications Item Specifications Magnification Regular paper size: Same Ratio: Direct Reduction: 1 : 0.78 (LGL LTR) 1 : 0.73 (11" x 17" LGL, 11" x 15" LTR) 1 : 0.64 (11" x 17" LTR) 1 : 0.50 (11" x 17"STMT) 1 : 0.25 Enlargement: 1 : 1.21 (LGL 11" x 17") 1 : 1.29 (LTR 11" x 17") 1 : 2.00 (STMT 11" x 17") 1 : 4.
▀ POD Deck Lite-B1 Item Specifications Paper Size / Weight / Type Size: 13" x 19", 12 5/8" x 17 11/16", 12" x 18", 11" x 17", LGL, LTR, LTRR, EXEC, STMTR, Custom Size (5 1/2" x 5 7/8" to 13" x 19 1/4" (139.7 mm x 148 mm to 330.2 mm x 487.7 mm))*1, and Envelopes*2*3 *1 Custom paper sizes which are smaller than 5 1/2" x 7 1/8" (139.7 mm x 182 mm) can be used only if they are standard paper sizes. *2 The following envelope types can be used: Standard Paper Size : Nagagata 3, Yougatanaga 3, Kakugata 2, No.
Specifications Item Specifications Paper Size / Weight / Type Type: Thin 2 (14 lb bond to 16 lb bond (52 g/m2 to 63 g/m2)), Thin 1 (17 lb bond to 20 lb bond (64 g/m2 to 79 g/m2)), Plain 1 (20 lb bond to 24 lb bond (80 g/m2 to 90 g/m2)), Plain 2 (25 lb bond to 28 lb bond (91 g/m2 to 105 g/m2)), Heavy1 (29 lb bond to 34 lb bond (106 g/m2 to 128 g/m2)), Heavy 2 (35 lb bond to 40 lb bond (129 g/m2 to 150 g/m2)), Heavy 3 (40 lb bond to 66 lb cover (151 g/m2 to 180 g/m2)), Heavy 4 (67 lb cover to 80 lb cover
▀ Stack Bypass Alignment Tray-C1 Item Specifications Paper Size / Weight / Type See "Specifications" of the "Stack Bypass-B1," on p. 41. Paper Capacity See "Specifications" of the "Stack Bypass-B1," on p. 41. Weight 2.4 lb (1.
Specifications ▀ Document Insertion Unit-M1 Item Specifications Paper Size/Weight/Type Size: 13" x 19", 12 5/8" x 17 11/16", 12" x 18", 11" x 17", LGL, LTR, LTRR, EXEC, and Custom Size (7 1/8" x 7 1/8" to 13" x 19 1/4" (182 mm x 182 mm to 330.2 mm x 487.
Item Specifications Paper Size / Weight / Type Weight: Z-Fold: 14 lb bond to 28 lb bond (52 g/m2 to 105 g/m2) C-Fold: 14 lb bond to 28 lb bond (52 g/m2 to 105 g/m2) Accordion Z-Fold: 14 lb bond to 28 lb bond (52 g/m2 to 105 g/m2) Double Parallel Fold: 14 lb bond to 24 lb bond (52 g/m2 to 90 g/m2) Half Fold: 14 lb bond to 28 lb bond (52 g/m2 to 105 g/m2) Type: Thin 2 (14 lb bond to 16 lb bond (52 g/m2 to 63 g/m2)), Thin 1 (17 lb bond to 20 lb bond (64 g/m2 to 79 g/m2)), Plain 1 (20 lb bond to 24 lb bond (
Specifications Item Specifications Weight Approximately 2.6 lb (1.2 kg) Installation Space Including the 76 7/8" x 36 3/4" (1,952 mm x 934 mm) Main Unit (W x D) (when the Duplex Color Image Reader Unit-H1 and the Upright Control Panel-D1 are attached) ▀ Finisher-AM1 Item Specifications Paper Size/Weight/Type Size: 13" x 19", 12 5/8" x 17 11/16", 12" x 18", 11" x 17", LGL, LTR, LTRR, EXEC, STMTR, Custom Size (4" x 5 7/8" to 13" x 19 1/4" (100 mm x 148 mm to 330.2 mm x 487.
Item Capacity Per Tray* Specifications 1 Staple mode Tray B: LTR, and EXEC: 3,000 sheets/200 sets (or 16 5/8" (423 mm) in height) LTRR: 2,000 sheets/200 sets (or 11 1/4" (285 mm) in height) 11" x 17" and LGL: 1,500 sheets/200 sets (or 8 1/2" (216 mm) in height) No Collating/Collate/Group mode with different paper sizes Tray A: 1,000 sheets (or 5 3/4" (147 mm) in height) Tray B*2: If the High Volume Stack Mode is set to 'Off': LTR and EXEC: 2,000 sheets (or 11 1/4" (285 mm) in height) 13" x 19", 12 5/8" x
Specifications Item Specifications Power Source/Maximum Power 120-240 V AC, 50/60 Hz, 8 A/500 W or less Consumption Dimensions (H x W x D) 48 3/4" x 31 1/2" x 31 1/4" (1,239 mm x 800 mm x 792 mm) Weight Approximately 287 lb (130 kg) Installation Space Including the Main Unit 92" x 36 3/4" (2,335 mm x 934 mm) (W x D) (when the Duplex Color Image Reader Unit-H1 and the Upright Control Panel-D1 are attached) ▀ Staple Finisher-T1 Item Specifications Paper Size/Weight/Type Size: 13" x 19", 12 5/8
Item Specifications Capacity Per Tray Collate, Group mode Tray B: LTR and EXEC: 1,300 sheets (or 7 3/8" (188 mm) in height) *1 11" x 17", LGL, and LTRR: 650 sheets (or 3 3/4" (96 mm) in height) Tray C: LTR and EXEC: 1,700 sheets (or 9 5/8" (243 mm) in height) *1 11" x 17", LGL, and LTRR: 650 sheets (or 3 3/4" (96 mm) in height) Staple mode Tray B, Tray C: LTR and EXEC: 1,300 sheets/100 sets (or 7 3/8" (188 mm) in height) *1 11" x 17", LGL, and LTRR: 650 sheets/50 sets (or 3 3/4" (96 mm) in height) No Col
Specifications ▀ Saddle Finisher-AM2 Item Specifications Paper Size/Weight/Type Size: 13" x 19", 12 5/8" x 17 11/16", 12" x 18", 11" x 17", LGL, LTR, LTRR, EXEC, STMTR, Custom Size (4" x 5 7/8" to 13" x 19 1/4" (100 mm x 148 mm to 330.2 mm x 487.
Item Capacity Per Tray* Specifications 1 No Collating/Collate/Group mode with different paper sizes Tray A: 1,000 sheets (or 5 3/4" (147 mm) in height) Tray B*2: If the High Volume Stack Mode is set to 'Off': LTR and EXEC: 2,000 sheets (or 11 1/4" (285 mm) in height) 13" x 19", 12 5/8" x 17 11/16", 12" x 18", 11" x 17", LGL, and LTRR: 1,000 sheets (or 5 3/4" (147 mm) in height) If the High Volume Stack Mode is set to 'On': (The maximum stack volume may vary, depending on the paper type.
Specifications Item Specifications Available Saddle Stitch Capacity/Size Saddle Stitch: 25 sheets (20 lb bond (80 g/m2)) (including 1 cover sheet) Saddle Folding: 5 sheets (20 lb bond (80 g/m2)) Size: 13" x 19", 12 5/8" x 17 11/16", 12" x 18", 11" x 17", LGL, LTRR, and Custom Size (8 1/4" x 11" to 13" x 19 1/4" (210 mm x 279.4 mm to 330.2 mm x 487.7 mm) Cover Weight: Requires the paper weight of the main document (more than 17 lb bond (64 g/m2)) or more.
Item Specifications Capacity Per Tray No Collating mode Tray A: LTR, STMTR, and EXEC: 250 sheets (or 1 3/4" (43 mm) in height) 13" x 19", 12 5/8" x 17 3/4", 12" x 18", 11" x 17", LGL, and LTRR: 125 sheets (or 7/8" (21 mm) in height) Tray B: LTR, STMTR, and EXEC: 1,300 sheets (or 7 3/8" (188 mm) in height) *1 13" x 19", 12 5/8" x 17 3/4", 12" x 18", 11" x 17", LGL, and LTRR: 650 sheets (or 3 3/4" (96 mm) in height) Tray C: LTR: 2,450 sheets (or 13 5/8" (347 mm) in height) *1 STMTR, and EXEC: 1,700 sheets
Specifications Item Max. Stapling Capacity/Available Staple Size Specifications When the standard staple cartridge is attached: (The maximum stapling capacity may vary, depending on the paper type and weight.
▀ Puncher Unit-BS1 / Puncher Unit-BT1 Item Specifications Paper Size/Weight/Type Size: Puncher Unit-BS1: Two Holes: LGL, LTRR, and Custom Size (7 1/8" x 7 1/8" to 11 3/4" x 17" (182 mm x 182 mm to 297 mm x 432 mm)) Three Holes: 11" x 17", LTR, EXEC, and Custom Size (9 1/2" x 7 1/8" to 11 3/4" x 17" (240 mm x 182 mm to 297 mm x 432 mm)) Puncher Unit-BT1: Two Holes: LGL, LTRR, and Custom Size (7 1/8" x 7 1/8" to 11 3/4" x 17" (182 mm x 182 mm to 297 mm x 432 mm)) Four Holes: 11" x 17", LTR, EXEC, and Custo
Specifications ▀ External 2/3 Hole Puncher-C1 Item Specifications Paper Size/Weight/Type Size: 2 Holes: LGL and LTRR 3 Holes: 11” x 17” and LTR Weight: 14 lb bond to 140 lb index (52 g/m2 to 256 g/m2) Type: Thin 2 (14 lb bond to 16 lb bond (52 g/m2 to 63 g/m2)), Thin 1 (17 lb bond to 20 lb bond (64 g/m2 to 79 g/m2)), Plain 1 (20 lb bond to 24 lb bond (80 g/m2 to 90 g/m2)), Plain 2 (25 lb bond to 28 lb bond (91 g/m2 to 105 g/m2)), Heavy1 (29 lb bond to 34 lb bond (106 g/m2 to 128 g/m2)), Heavy 2 (35 lb b
▀ Professional Puncher Integration Unit-C1 Item Specifications Paper Size/Weight/Type Size: LTR Weight: Plain: 20 lb bond to 80 lb cover (75 g/m2 to 216 g/m2) Coated: 44.
Specifications Item Specifications Interface 1000BASE-T, 100BASE-TX, 10BASE-T Color Mode Automatic-Color Select (Full Color/Grayscale), Automatic-Color Select (Full Color/Black-andWhite), Full Color, Grayscale, Black-and-White Original Type Text, Text/Photo, Photo Other Preview, Browse Windows (SMB) File Server Optional PDF / XPS / OOXML Functions PDF Compact, Trace and Smooth, Limited Color, Encryption, OCR, Device Signature, User Signature, Optimization for Web*1, PDF/A-1b, Policy Applied XPS
Item Specifications Optional PDF / XPS / OOXML Functions PDF (E-mail only) Compact, Trace and Smooth, Limited Color, Encryption, OCR, Device Signature, User Signature, Optimization for Web*3, PDF/A-1b, Policy Applied XPS Compact, OCR, Device Signature, User Signature OOXML PowerPoint, Word, OCR *1 Available after setting RX conditions of the destination. *2 Sent as LTR. *3 PDF files optimized for Web viewing.
Product Name Safety regulations require the product’s name to be registered. In some regions where this product is sold, the following name(s) in parenthesis may be registered instead. imagePRESS C800/C700/C60 (F163000) FCC (Federal Communications Commission) Users in the U.S.A. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules, and the limits for an ISM equipment, pursuant to Part 18 of the FCC Rules.
International ENERGY STAR Program As an ENERGY STAR® Partner, Canon USA, Inc. has determined that this machine meets the international ENERGY STAR Program for energy efficiency. The International ENERGY STAR Office Equipment Program is an international program that promotes energy saving through the use of computers and other office equipment. The program backs the development and dissemination of products with functions that effectively reduce energy consumption.
Disclaimers The information in this document is subject to change without notice. CANON INC. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, EITHER EXPRESS OR IMPLIED, EXCEPT AS PROVIDED HEREIN, INCLUDING WITHOUT LIMITATION, THEREOF, WARRANTIES AS TO MARKETABILITY, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR USE, OR NON-INFRINGEMENT. CANON INC.
Trademarks "MEAP" is a trademark of CANON Inc., referring to an "application platform" for Canon multifunction and single function printers. This product contains the Universal Font Scaling Technology or UFST® under license from Monotype Imaging, Inc. UFST® is a trademark of Monotype Imaging, Inc. registered in the United States Patent and Trademark Office and may be registered in certain jurisdictions. Apple, AppleTalk, EtherTalk, LocalTalk, Mac, Macintosh, Mac OS, and Safari are trademarks of Apple Inc.
The PDF logo is a trademark or registered trademark of Adobe Systems Incorporated in the United States and other countries. Copyright © 2008 Adobe Systems Incorporated. All rights reserved. Protected by U.S. Patents 6,185,684; 6,205,549; 7,213,269; 7,272,628; 7,278,168; Patents pending in the U.S. and other countries. All instances of the name PostScript in the text are references to the PostScript language as defined by Adobe Systems Incorporated unless otherwise stated.
CANON imagePRESS C800/C700 SERIES LIMITED WARRANTY Canon U.S.A., Inc. or Canon Canada Inc. (as applicable, "Canon") warrants the imagePRESS C800/C700Series product and Canon brand options designed for use with the imagePRESS product (collectively the "Product") to be free from defects in workmanship and materials under normal use and service for a period of 90 days after delivery to the original purchaser ("Purchaser") or 180,000 prints or copies (or a combination of both), whichever comes first.
CANON imagePRESS C60 SERIES LIMITED WARRANTY Canon U.S.A., Inc. or Canon Canada Inc. (as applicable, "Canon") warrants the imagePRESS C60 product and Canon brand options designed for use with the imagePRESS product (collectively the "Product") to be free from defects in workmanship and materials under normal use and service for a period of 90 days after delivery to the original purchaser ("Purchaser") or 90,000 prints or copies (or a combination of both), whichever comes first.
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON U.S.A., INC. One Canon Park, Melville, NY 11747, U.S.A. CANON CANADA INC. 6390 Dixie Road Mississauga, Ontario L5T 1P7, Canada CANON EUROPA N.V. Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands (See http://www.canon-europe.com/ for details on your regional dealer) CANON LATIN AMERICA, INC. One Canon Park, Melville, NY 11747, U.S.A. CANON AUSTRALIA PTY.
