User's Manual


 󰮏
When the text is rendered in the di󰮏erent font, the text layout is broken, or the texts are not printed,
one of the following reasons may be the cause. Follow the instructions below to remove the cause of
problem.
A) Check the unsent (original) PDF file if the same problem can be seen. If you see the same
problem, please make corrections on the original PDF le data.
B) Check the job processed at the True Flow system if the same problem can be seen. If you see
the same problem, please contact the True Flow system engineer.
If you still have trouble, please contact the Canon service personnel.
 
A following reason can be the cause. Follow the instruction below to remove the cause of problem.
A) Check from the “JDF Job Definitions” dialog box of JDF Connector software if the correct
number of copies is specied.
If you still have trouble, please contact the Canon service personnel.
 
A following reason can be the cause. Follow the instruction below to remove the cause of problem.
A) From Command WorkStation, right-click the job and select “Property”. When “Property”
dialog opens, conrm the “Duplex” print option setting on the Layout. If the option is not set
properly, contact the True Flow system engineer.
If you still have trouble, please contact the Canon service personnel.

A following reason can be the cause. Follow the instruction below to remove the cause of problem.
A) From Command WorkStation, right-click the job and select “Property”. When “Property”
dialog opens, conrm the “Copies” print option setting on the Job Info. If the option is not set
properly, contact the True Flow system engineer.
If you still have trouble, please contact the Canon service personnel.